Have problems with basic label. When I set the scale factor to 0.1, I get error message that is is "Scale Factor Error - Conversion from string" "to type 'Double' is not valid."
I would want to move the comma ",". Example 400> 40.0
Operated scale factor to the value sent to the PLC "PLCadressEntry"?
Very simply HMI. Works very well.
/ / WB
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Have problems with basic label. When I set the scale factor to 0.1, I get error message that is is "Scale Factor Error - Conversion from string" "to type 'Double' is not valid."
I would want to move the comma ",". Example 400> 40.0
Operated scale factor to the value sent to the PLC "PLCadressEntry"?
Very simply HMI. Works very well.
/ / WB
You mentioned a comms so I wonder if its an internationization thing, The software has only been tested to work using a decimal.
Ok. But I would just move the decimal point. So that 400 is 40.0