Menu
▾
▴
[ACPI] acpica 20051202 regression
|
From: Dave J. <da...@re...> - 2005-12-21 17:22:40
|
Hi acpi folks, I tried out the latest acpica patch from Len's kernel.org page, and noticed that it stops my EM64T from booting unless I now boot with pci=3Dnoacpi. Boot log attached. This kernel was based on 2.6.15rc6. Dave Bootdata ok (command line is ro root=3D/dev/VolGroup00/LogVol00 vga=3D791= console=3DttyS0,38400 console=3Dtty0 profile=3D1 libusual.bias=3Dub debu= g time initcall_debug) Linux version 2.6.14-1.1777_FC5 (bhc...@hs...) (= gcc version 4.1.0 20051214 (Red Hat 4.1.0-0.9)) #1 SMP Tue Dec 20 02:29:4= 1 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe8ac00 (usable) BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS) BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data) BIOS-e820: 000000003fe8ec00 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 DELL ) @ 0x00000000000f= ebf0 ACPI: RSDT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fcb83 ACPI: FADT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fcbd7 ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000= fffc7674 ACPI: MADT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fcc4b ACPI: BOOT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fccd5 ACPI: ASF! (v016 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fccfd ACPI: MCFG (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fcd64 ACPI: HPET (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000= 000fcda2 ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000= 00000000 No NUMA configuration found Faking a node at 0000000000000000-000000003fe8a000 Bootmem setup node 0 0000000000000000-000000003fe8a000 On node 0 totalpages: 255741 DMA zone: 2596 pages, LIFO batch:0 DMA32 zone: 253145 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Checking aperture... SMP: Allowing 4 CPUs, 0 hotplug CPUs Built 1 zonelists Kernel command line: ro root=3D/dev/VolGroup00/LogVol00 vga=3D791 console= =3DttyS0,38400 console=3Dtty0 profile=3D1 libusual.bias=3Dub debug time i= nitcall_debug kernel profiling enabled (shift: 1) [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 14.318180 MHz HPET timer. [ 0.000000] time.c: Detected 2793.105 MHz processor. [ 14.149613] Console: colour dummy device 80x25 [ 15.184183] Dentry cache hash table entries: 131072 (order: 8, 1048576= bytes) [ 15.206382] Inode-cache hash table entries: 65536 (order: 7, 524288 by= tes) [ 15.239572] Memory: 1014800k/1047080k available (2323k kernel code, 31= 896k reserved, 1627k data, 224k init) [ 15.347734] Calibrating delay using timer specific routine.. 5591.27 B= ogoMIPS (lpj=3D11182547) [ 15.373307] Security Framework v1.0.0 initialized [ 15.387427] SELinux: Initializing. [ 15.397936] SELinux: Starting in permissive mode [ 15.412043] selinux_register_security: Registering secondary module c= apability [ 15.433972] Capability LSM initialized as secondary [ 15.448721] Mount-cache hash table entries: 256 [ 15.462745] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 15.478435] CPU: L2 cache: 1024K [ 15.488103] using mwait in idle threads. [ 15.499850] CPU: Physical Processor ID: 0 [ 15.511877] CPU0: Thermal monitoring enabled (TM1) [ 15.526247] mtrr: v2.0 (20020519) [ 15.615698] Using local APIC timer interrupts. [ 15.664767] Detected 12.469 MHz APIC timer. [ 15.677666] Booting processor 1/4 APIC 0x6 [ 15.700331] Initializing CPU#1 [ 15.778988] Calibrating delay using timer specific routine.. 5586.28 B= ogoMIPS (lpj=3D11172568) [ 15.779000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 15.779002] CPU: L2 cache: 1024K [ 15.779006] CPU: Physical Processor ID: 3 [ 15.779017] CPU1: Thermal monitoring enabled (TM1) [ 15.779246] Intel(R) Xeon(TM) CPU 2.80GHz stepping 0= 1 [ 15.779256] CPU 1: Syncing TSC to CPU 0. [ 15.779420] CPU 1: synchronized TSC with CPU 0 (last diff 10 cycles, m= axerr 1225 cycles) [ 15.779660] Booting processor 2/4 APIC 0x1 [ 15.944377] Initializing CPU#2 [ 16.022570] Calibrating delay using timer specific routine.. 5586.15 B= ogoMIPS (lpj=3D11172319) [ 16.022583] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 16.022587] CPU: L2 cache: 1024K [ 16.022591] CPU: Physical Processor ID: 0 [ 16.022604] CPU2: Thermal monitoring enabled (TM1) [ 16.022839] Intel(R) Xeon(TM) CPU 2.80GHz stepping 0= 1 [ 16.022849] APIC error on CPU2: 00(40) [ 16.022854] CPU 2: Syncing TSC to CPU 0. [ 16.023024] CPU 2: synchronized TSC with CPU 0 (last diff -6 cycles, m= axerr 917 cycles) [ 16.023301] Booting processor 3/4 APIC 0x7 [ 16.198958] Initializing CPU#3 [ 16.278130] Calibrating delay using timer specific routine.. 5586.18 B= ogoMIPS (lpj=3D11172372) [ 16.278141] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 16.278143] CPU: L2 cache: 1024K [ 16.278146] CPU: Physical Processor ID: 3 [ 16.278158] CPU3: Thermal monitoring enabled (TM1) [ 16.278389] Intel(R) Xeon(TM) CPU 2.80GHz stepping 0= 1 [ 16.278397] APIC error on CPU3: 00(40) [ 16.278401] CPU 3: Syncing TSC to CPU 0. [ 16.278604] CPU 3: synchronized TSC with CPU 0 (last diff 17 cycles, m= axerr 1393 cycles) [ 16.278616] Brought up 4 CPUs [ 16.440769] time.c: Using HPET/TSC based timekeeping. [ 16.455919] testing NMI watchdog ... OK. [ 16.508857] checking if image is initramfs... it is [ 16.714269] Calling initcall 0xffffffff805f834a: cpufreq_tsc+0x0/0x6b(= ) [ 16.734164] Calling initcall 0xffffffff8011c73f: init_smp_flush+0x0/0x= 7c() [ 16.754802] Calling initcall 0xffffffff8060215f: init_elf32_binfmt+0x0= /0xc() [ 16.775962] Calling initcall 0xffffffff80603443: helper_init+0x0/0x2c(= ) [ 16.795881] Calling initcall 0xffffffff806035f1: pm_init+0x0/0x27() [ 16.814728] Calling initcall 0xffffffff8060364d: pm_disk_init+0x0/0x13= () [ 16.834862] Calling initcall 0xffffffff806038ee: ksysfs_init+0x0/0x27(= ) [ 16.854742] Calling initcall 0xffffffff806058b4: filelock_init+0x0/0x2= f() [ 16.875154] Calling initcall 0xffffffff80606184: init_misc_binfmt+0x0/= 0x35() [ 16.896331] Calling initcall 0xffffffff806061b9: init_script_binfmt+0x= 0/0xc() [ 16.917771] Calling initcall 0xffffffff806061c5: init_elf_binfmt+0x0/0= xc() [ 16.938418] Calling initcall 0xffffffff806069a6: debugfs_init+0x0/0x40= () [ 16.958551] Calling initcall 0xffffffff80606ece: securityfs_init+0x0/0= x40() [ 16.979482] Calling initcall 0xffffffff8061085c: netlink_proto_init+0x= 0/0x201() [ 17.001465] NET: Registered protocol family 16 [ 17.014812] Calling initcall 0xffffffff806075b1<7>Losing some ticks...= checking if CPU frequency changed. [ 17.043556] : kobject_uevent_init+0x0/0x39() [ 17.056380] Calling initcall 0xffffffff80607706: pcibus_class_init+0x0= /0xc() [ 17.077568] Calling initcall 0xffffffff80607d34: pci_driver_init+0x0/0= xc() [ 17.098245] Calling initcall 0xffffffff8060af97: tty_class_init+0x0/0x= 27() [ 17.118907] Calling initcall 0xffffffff8060d19a: register_node_type+0x= 0/0xc() [ 17.140343] Calling initcall 0xffffffff805faa08: mtrr_if_init+0x0/0x6a= () [ 17.160468] Calling initcall 0xffffffff80607eb9: pci_acpi_init+0x0/0x2= b() [ 17.180855] ACPI: bus type pci registered [ 17.192872] Calling initcall 0xffffffff80609ae2: init_acpi_device_noti= fy+0x0/0x48() [ 17.215865] Calling initcall 0xffffffff8060f0fb: pci_direct_init+0x0/0= x184() [ 17.237039] PCI: Using configuration type 1 [ 17.249578] Calling initcall 0xffffffff8060fce3: pci_mmcfg_init+0x0/0x= 187() [ 17.277044] PCI: Using MMCONFIG at e0000000 [ 17.289632] Calling initcall 0xffffffff805fa86c: mtrr_init_finialize+0= x0/0x31() [ 17.311582] Calling initcall 0xffffffff80600a11: topology_init+0x0/0xb= b() [ 17.333421] Calling initcall 0xffffffff80159580: pm_sysrq_init+0x0/0x1= 6() [ 17.353822] Calling initcall 0xffffffff8060569e: init_bio+0x0/0x10c() [ 17.380621] Calling initcall 0xffffffff8060740b: genhd_device_init+0x0= /0x30() [ 17.402437] Calling initcall 0xffffffff8060850d: fbmem_init+0x0/0x92() [ 17.422083] Calling initcall 0xffffffff80609842: acpi_init+0x0/0x196() [ 17.441694] ACPI: Subsystem revision 20051202 [ 17.505374] ACPI: Interpreter enabled [ 17.516350] ACPI: Using IOAPIC for interrupt routing [ 17.531337] Calling initcall 0xffffffff80609d7f: acpi_ec_init+0x0/0x60= () [ 17.551471] Calling initcall 0xffffffff8060a1d6: acpi_pci_root_init+0x= 0/0x25() [ 17.573160] Calling initcall 0xffffffff8060a21b: acpi_pci_link_init+0x= 0/0x45() [ 17.594844] Calling initcall 0xffffffff8060a38b: acpi_power_init+0x0/0= x74() [ 17.615747] Calling initcall 0xffffffff8060a548: acpi_system_init+0x0/= 0xbd() [ 17.637231] Calling initcall 0xffffffff8060a605: acpi_event_init+0x0/0= x3a() [ 17.661498] Calling initcall 0xffffffff8060a74c: acpi_scan_init+0x0/0x= 112() [ 17.690635] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.705022] PCI: Probing PCI hardware (bus 00) [ 17.718410] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 17.758914] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 17.778244] PCI quirk: region 0880-08bf claimed by ICH4 GPIO [ 17.795501] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 17.813554] PCI: PXH quirk detected, disabling MSI for SHPC device [ 17.832555] PCI: PXH quirk detected, disabling MSI for SHPC device [ 17.852171] Boot video device is 0000:05:00.0 [ 17.865595] PCI: Transparent bridge - 0000:00:1e.0 [ 17.880029] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.572014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 18.600341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._P= RT] [ 18.629785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._P= RT] [ 18.659729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 18.685539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] [ 18.711367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] [ 18.783337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 1= 2 15) [ 18.805426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 1= 2 15) [ 18.827497] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 1= 2 15) [ 18.849572] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 1= 2 15) [ 18.871674] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12= 15) *0, disabled. [ 18.897174] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12= 15) *0, disabled. [ 18.922688] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12= 15) *0, disabled. [ 18.948207] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 1= 2 15) [ 18.969506] Calling initcall 0xffffffff8060aa11: pnp_init+0x0/0x1c() [ 18.988589] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.005597] Calling initcall 0xffffffff8060ac06: pnpacpi_init+0x0/0x67= () [ 19.025722] pnp: PnP ACPI init [ 19.037532] pnp: PnPACPI: unknown resource type 7 [ 19.051640] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01 [ 19.069315] pnp: PnPACPI: unknown resource type 7 [ 19.083417] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200 [ 19.101074] pnp: PnPACPI: unknown resource type 7 [ 19.115178] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04 [ 19.132831] pnp: PnPACPI: unknown resource type 7 [ 19.146938] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800 [ 19.164594] pnp: PnPACPI: unknown resource type 7 [ 19.178693] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00 [ 19.201066] pnp: PnPACPI: unknown resource type 7 [ 19.215169] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700 [ 19.234175] pnp: PnPACPI: unknown resource type 7 [ 19.248286] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303 [ 19.269573] pnp: PnPACPI: unknown resource type 7 [ 19.283682] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f13 [ 19.306786] pnp: PnPACPI: unknown resource type 7 [ 19.320888] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401 [ 19.342317] pnp: PnPACPI: unknown resource type 7 [ 19.356414] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501 [ 19.377834] pnp: PnPACPI: unknown resource type 7 [ 19.391940] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501 [ 19.416835] pnp: PnP ACPI: found 0 devices [ 19.429108] Calling initcall 0xffffffff8060b400: misc_init+0x0/0x7d() [ 19.448463] Calling initcall 0xffffffff8060e55e: init_pcmcia_cs+0x0/0x= 61() [ 19.469115] Calling initcall 0xffffffff8060e6aa: usb_init+0x0/0xcc() [ 19.488398] usbcore: registered new driver usbfs [ 19.502408] usbcore: registered new driver hub [ 19.515922] Calling initcall 0xffffffff8060ea77: input_init+0x0/0x155(= ) [ 19.535825] Calling initcall 0xffffffff8060f2e2: pci_acpi_init+0x0/0xa= 4() [ 19.556210] PCI: Using ACPI for IRQ routing [ 19.568752] PCI: If a device doesn't work, try "pci=3Drouteirq". If i= t helps, post a report [ 19.593555] Calling initcall 0xffffffff8060f386: pci_legacy_init+0x0/0= x120() [ 19.614730] Calling initcall 0xffffffff8060f7e3: pcibios_irq_init+0x0/= 0x49a() [ 19.636157] Calling initcall 0xffffffff8060fc7d: pcibios_init+0x0/0x66= () [ 19.656362] Calling initcall 0xffffffff8060fff2: proto_init+0x0/0x31() [ 19.675977] Calling initcall 0xffffffff80610086: net_dev_init+0x0/0x1f= a() [ 19.696517] Calling initcall 0xffffffff8061075e: pktsched_init+0x0/0xb= 7() [ 19.716902] Calling initcall 0xffffffff80610821: tc_filter_init+0x0/0x= 3b() [ 19.737561] Calling initcall 0xffffffff80610a5d: genl_init+0x0/0xa5() [ 19.756926] Calling initcall 0xffffffff805f884c: late_hpet_init+0x0/0x= b7() [ 19.777585] hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IR= Qs 2, 8, 0 [ 19.799810] hpet0: 3 64-bit timers, 14318180 Hz [ 19.814397] Calling initcall 0xffffffff805ffacb: pci_iommu_init+0x0/0x= 5a0() [ 19.835479] PCI-DMA: Disabling IOMMU. [ 19.846454] Calling initcall 0xffffffff8060584a: init_pipe_fs+0x0/0x40= () [ 19.866607] Calling initcall 0xffffffff8060a85e: acpi_motherboard_init= +0x0/0x1b3() [ 19.891981] Calling initcall 0xffffffff8060ab0e: pnp_system_init+0x0/0= xc() [ 19.912783] Calling initcall 0xffffffff8060aee2: chr_dev_init+0x0/0x7d= () [ 19.934724] Calling initcall 0xffffffff8060e5bf: init_pcmcia_bus+0x0/0= x48() [ 19.955690] Calling initcall 0xffffffff8060edd4: cpufreq_gov_performan= ce_init+0x0/0xc() [ 19.979732] Calling initcall 0xffffffff8060ede0: cpufreq_gov_userspace= _init+0x0/0x1c() [ 20.003509] Calling initcall 0xffffffff8060edfc: pcibios_assign_resour= ces+0x0/0x74() [ 20.026798] PCI: Bridge: 0000:01:00.0 [ 20.037773] IO window: disabled. [ 20.047964] MEM window: disabled. [ 20.058410] PREFETCH window: disabled. [ 20.070164] PCI: Bridge: 0000:01:00.2 [ 20.081138] IO window: d000-dfff [ 20.091332] MEM window: dfe00000-dfefffff [ 20.103868] PREFETCH window: disabled. [ 20.115623] PCI: Bridge: 0000:00:02.0 [ 20.126593] IO window: d000-dfff [ 20.136787] MEM window: dfe00000-dfefffff [ 20.149322] PREFETCH window: disabled. [ 20.161082] PCI: Bridge: 0000:00:03.0 [ 20.172054] IO window: disabled. [ 20.182243] MEM window: dfd00000-dfdfffff [ 20.194775] PREFETCH window: disabled. [ 20.206533] PCI: Bridge: 0000:00:04.0 [ 20.217500] IO window: c000-cfff [ 20.227682] MEM window: dfb00000-dfcfffff [ 20.240221] PREFETCH window: d0000000-d7ffffff [ 20.254061] PCI: Bridge: 0000:00:1e.0 [ 20.265032] IO window: b000-bfff [ 20.275224] MEM window: disabled. [ 20.285666] PREFETCH window: disabled. [ 20.297447] GSI 16 sharing vector 0xA9 and IRQ 16 [ 20.311552] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low)= -> IRQ 169 [ 20.334025] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.352838] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 20.371647] PCI: Setting latency timer of device 0000:01:00.2 to 64 [ 20.390465] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low)= -> IRQ 0 [ 20.412419] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 20.431221] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low)= -> IRQ 0 [ 20.453166] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 20.471972] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 20.490780] Calling initcall 0xffffffff8060fe6a: fill_mp_bus_to_cpumas= k+0x0/0xd8() [ 20.513520] Calling initcall 0xffffffff80113380: time_init_device+0x0/= 0x20() [ 20.534858] Calling initcall 0xffffffff805f939a: i8259A_init_sysfs+0x0= /0x22() [ 20.556463] Calling initcall 0xffffffff805f937a: init_timer_sysfs+0x0/= 0x20() [ 20.577791] Calling initcall 0xffffffff805f99ae: vsyscall_init+0x0/0x7= f() [ 20.598198] Calling initcall 0xffffffff805f9bdc: sbf_init+0x0/0xcb() [ 20.617284] Simple Boot Flag at 0x7a set to 0x1 [ 20.630864] Calling initcall 0xffffffff805fa66a: i8237A_init_sysfs+0x0= /0x20() [ 20.652447] Calling initcall 0xffffffff805fa697: periodic_mcheck_init+= 0x0/0x26() [ 20.674672] Calling initcall 0xffffffff805fa6bd: mce_init_device+0x0/0= x8c() [ 20.696516] Calling initcall 0xffffffff805fa7f3: threshold_init_device= +0x0/0x79() [ 20.719830] Calling initcall 0xffffffff805fb4c4: msr_init+0x0/0x130() [ 20.740005] Calling initcall 0xffffffff805fb5f4: cpuid_init+0x0/0x130(= ) [ 20.760679] Calling initcall 0xffffffff805fc03e: init_lapic_sysfs+0x0/= 0x32() [ 20.782021] Calling initcall 0xffffffff805fc5fe: ioapic_init_sysfs+0x0= /0xb7() [ 20.803978] Calling initcall 0xffffffff80124325: cache_sysfs_init+0x0/= 0x70() [ 20.825153] Calling initcall 0xffffffff80600afc: x8664_sysctl_init+0x0= /0x16() [ 20.846598] Calling initcall 0xffffffff80602136: ia32_init+0x0/0x13() [ 20.865941] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 = ak Exp $ [ 20.887611] Calling initcall 0xffffffff80602149: ia32_binfmt_init+0x0/= 0x16() [ 20.908782] Calling initcall 0xffffffff8060216b: init_syscall32+0x0/0x= 57() [ 20.929445] Calling initcall 0xffffffff80602828: create_proc_profile+0= x0/0x38e() [ 20.951667] Calling initcall 0xffffffff80602d4f: ioresources_init+0x0/= 0x3f() [ 20.972842] Calling initcall 0xffffffff80602ede: uid_cache_init+0x0/0x= 88() [ 20.993546] Calling initcall 0xffffffff8060322e: param_sysfs_init+0x0/= 0x16c() [ 21.022169] Calling initcall 0xffffffff8060339a: init_posix_timers+0x0= /0xa9() [ 21.043677] Calling initcall 0xffffffff8060346f: init_posix_cpu_timers= +0x0/0xb4() [ 21.066166] Calling initcall 0xffffffff80603523: init+0x0/0x7a() [ 21.084249] Calling initcall 0xffffffff8060359d: proc_dma_init+0x0/0x2= 2() [ 21.104644] Calling initcall 0xffffffff801521ce: percpu_modinit+0x0/0x= 70() [ 21.125302] Calling initcall 0xffffffff806035cc: kallsyms_init+0x0/0x2= 5() [ 21.145698] Calling initcall 0xffffffff806037c8: audit_init+0x0/0xe7() [ 21.165307] audit: initializing netlink socket (disabled) [ 21.181528] audit(1135167241.040:1): initialized [ 21.195376] Calling initcall 0xffffffff806038af: init_kprobes+0x0/0x3f= () [ 21.215516] Calling initcall 0xffffffff806042c6: init_per_zone_pages_m= in+0x0/0x50() [ 21.238523] Calling initcall 0xffffffff80604e15: pdflush_init+0x0/0x13= () [ 21.258746] Calling initcall 0xffffffff80604e28: cpucache_init+0x0/0x4= d() [ 21.279138] Calling initcall 0xffffffff80605363: kswapd_init+0x0/0x5d(= ) [ 21.299025] Calling initcall 0xffffffff806053ee: procswaps_init+0x0/0x= 22() [ 21.319680] Calling initcall 0xffffffff80605440: hugetlb_init+0x0/0x88= () [ 21.339809] Total HugeTLB memory allocated, 0 [ 21.352866] Calling initcall 0xffffffff8060553a: init_tmpfs+0x0/0xd5() [ 21.372530] Calling initcall 0xffffffff8060588a: fasync_init+0x0/0x2a(= ) [ 21.392434] Calling initcall 0xffffffff80605eca: aio_setup+0x0/0x65() [ 21.412025] Calling initcall 0xffffffff80605f2f: inotify_setup+0x0/0xc= d() [ 21.432493] Calling initcall 0xffffffff80605ffc: eventpoll_init+0x0/0x= 106() [ 21.453490] Calling initcall 0xffffffff80606102: init_sys32_ioctl+0x0/= 0x82() [ 21.474681] Calling initcall 0xffffffff806061d1: init_mbcache+0x0/0x1d= () [ 21.494811] Calling initcall 0xffffffff806061ee: dquot_init+0x0/0xe7() [ 21.514406] VFS: Disk quotas dquot_6.5.1 [ 21.526224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 21.545544] Calling initcall 0xffffffff806062d5: init_v2_quota_format+= 0x0/0xc() [ 21.567503] Calling initcall 0xffffffff806062e1: dnotify_init+0x0/0x2a= () [ 21.587662] Calling initcall 0xffffffff80606744: init_devpts_fs+0x0/0x= 33() [ 21.608332] Calling initcall 0xffffffff80606777: init_ext2_fs+0x0/0x63= () [ 21.628534] Calling initcall 0xffffffff80606817: init_ramfs_fs+0x0/0xc= () [ 21.648659] Calling initcall 0xffffffff80606823: init_hugetlbfs_fs+0x0= /0x76() [ 21.670148] Calling initcall 0xffffffff80606899: init_iso9660_fs+0x0/0= x65() [ 21.691103] Calling initcall 0xffffffff8060698e: init_nls_cp437+0x0/0x= c() [ 21.711493] Calling initcall 0xffffffff8060699a: init_nls_ascii+0x0/0x= c() [ 21.731969] Calling initcall 0xffffffff806069e6: ipc_init+0x0/0x14() [ 21.751098] Calling initcall 0xffffffff80606be1: init_mqueue_fs+0x0/0x= ef() [ 21.771802] Calling initcall 0xffffffff80606e3a: key_proc_init+0x0/0x5= 2() [ 21.792198] Calling initcall 0xffffffff80606fb9: selinux_nf_ip_init+0x= 0/0x57() [ 21.813885] SELinux: Registering netfilter hooks [ 21.848928] Calling initcall 0xffffffff80607103: init_sel_fs+0x0/0x5e(= ) [ 21.868936] Calling initcall 0xffffffff80607181: selnl_init+0x0/0x3f() [ 21.888546] Calling initcall 0xffffffff806071c0: sel_netif_init+0x0/0x= 63() [ 21.909195] Calling initcall 0xffffffff806072ae: init_crypto+0x0/0x18(= ) [ 21.929062] Initializing Cryptographic API [ 21.941342] Calling initcall 0xffffffff806072e6: init+0x0/0xc() [ 21.959115] Calling initcall 0xffffffff806072f2: init+0x0/0xc() [ 21.976891] Calling initcall 0xffffffff806072fe: ksign_init+0x0/0x3c() [ 21.996491] ksign: Installing public key data [ 22.009545] Loading keyring [ 22.017936] - Added public key 11E9AB2B25FA5C [ 22.031000] - User ID: Red Hat, Inc. (Kernel Module GPG key) [ 22.047974] Calling initcall 0xffffffff8060743b: noop_init+0x0/0xc() [ 22.067047] io scheduler noop registered [ 22.078807] Calling initcall 0xffffffff80607447: as_init+0x0/0x4f() [ 22.097653] io scheduler anticipatory registered [ 22.111498] Calling initcall 0xffffffff80607496: deadline_init+0x0/0x4= f() [ 22.131907] io scheduler deadline registered [ 22.144714] Calling initcall 0xffffffff806074e5: cfq_init+0x0/0xcc() [ 22.163882] io scheduler cfq registered [ 22.175379] Calling initcall 0xffffffff802117e4: pci_init+0x0/0x2b() [ 22.194461] Intel E7520/7320/7525 detected.<7>Calling initcall 0xfffff= fff80607d40: pci_sysfs_init+0x0/0x30() [ 22.225343] Calling initcall 0xffffffff80607d70: pci_proc_init+0x0/0x8= 5() [ 22.245797] Calling initcall 0xffffffff80607df5: pcie_portdrv_init+0x0= /0x23() [ 22.267479] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low)= -> IRQ 0 [ 22.289426] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.308230] pcie_portdrv_probe->Dev[3595:8086] has invalid IRQ. Check = vendor BIOS [ 22.330728] Allocate Port Service[pcie00] [ 22.342933] Allocate Port Service[pcie01] [ 22.355135] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low)= -> IRQ 0 [ 22.377094] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 22.395904] pcie_portdrv_probe->Dev[3596:8086] has invalid IRQ. Check = vendor BIOS [ 22.418383] Allocate Port Service[pcie00] [ 22.430576] Allocate Port Service[pcie01] [ 22.442766] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low)= -> IRQ 0 [ 22.464718] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.483522] pcie_portdrv_probe->Dev[3597:8086] has invalid IRQ. Check = vendor BIOS [ 22.506005] Allocate Port Service[pcie00] [ 22.518184] Allocate Port Service[pcie01] [ 22.530395] Calling initcall 0xffffffff80607e18: pci_hotplug_init+0x0/= 0x50() [ 22.551587] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.568308] Calling initcall 0xffffffff806081ed: fb_console_init+0x0/0= x63() [ 22.589221] Calling initcall 0xffffffff80608c3a: vesafb_init+0x0/0x207= () [ 22.609712] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc200101= 00000, using 3072k, total 16384k [ 22.637658] vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D9 [ 22.655931] vesafb: scrolling: redraw [ 22.666904] vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 [ 22.683612] vesafb: Mode is not VGA compatible [ 22.736770] Console: switching to colour frame buffer device 128x48 [ 22.755810] fb0: VESA VGA frame buffer device [ 22.769044] Calling initcall 0xffffffff8060a179: acpi_fan_init+0x0/0x5= d() [ 22.789718] Calling initcall 0xffffffff8060a260: irqrouter_init_sysfs+= 0x0/0x37() [ 22.812382] Calling initcall 0xffffffff8060a3ff: acpi_processor_init+0= x0/0xa9() [ 22.834810] Calling initcall 0xffffffff8060a4a8: acpi_container_init+0= x0/0x43() [ 22.926843] Calling initcall 0xffffffff8060a4eb: acpi_thermal_init+0x0= /0x5d() [ 22.948588] Calling initcall 0xffffffff8060af6d: rand_initialize+0x0/0= x2a() [ 22.969783] Calling initcall 0xffffffff8060afec: tty_init+0x0/0x1cc() [ 23.004504] Calling initcall 0xffffffff8060b1b8: pty_init+0x0/0x248() [ 23.024170] Calling initcall 0xffffffff8060b89f: rtc_init+0x0/0x1ca() [ 23.043964] Real Time Clock Driver v1.12 [ 23.055878] Calling initcall 0xffffffff8060ba69: hpet_init+0x0/0x62() [ 23.075646] Calling initcall 0xffffffff8060bacb: agp_init+0x0/0x23() [ 23.095002] Linux agpgart interface v0.101 (c) Dave Jones [ 23 =CA=AA=82=82=BA=EA=81Calling initcall 0xffffffff8060bbe9: agp_inte= l_init+0x0/0x1d() [ 23.095308] Calling initcall 0xffffffff8060bc06: serio_init+0x0/0x96() [ 23.095416] Calling initcall 0xffffffff8060bd1f: i8042_init+0x0/0x8f2(= ) [ 23.109350] PNP: No PS/2 controller found. Probing ports directly. [ 23.111613] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.111807] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.111814] Calling initcall 0xffffffff8060c611: serport_init+0x0/0x2a= () [ 23.111822] Calling initcall 0xffffffff8060c94e: serial8250_init+0x0/0= x105() [ 23.111829] Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ = sharing enabled =FF[ 23.368301] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 23.647821] serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A [ 23.677434] Calling initcall 0xffffffff8060cb22: serial8250_pnp_init+0= x0/0xc() [ 23.703698] Calling initcall 0xffffffff8060cb2e: serial8250_pci_init+0= x0/0xe() [ 23.729946] Calling initcall 0xffffffff8060d132: firmware_class_init+0= x0/0x68() [ 23.756399] Calling initcall 0xffffffff8060d1d7: rd_init+0x0/0x1c6() [ 23.783921] RAMDISK driver initialized: 16 RAM disks of 16384K size 10= 24 blocksize [ 23.811528] Calling initcall 0xffffffff8060d3e3: net_olddevs_init+0x0/= 0xa9() [ 23.837990] Calling initcall 0xffffffff80278eba: aec62xx_ide_init+0x0/= 0xe() [ 23.864048] Calling initcall 0xffffffff802794b4: ali15x3_ide_init+0x0/= 0xe() [ 23.890135] Calling initcall 0xffffffff8027aa24: amd74xx_ide_init+0x0/= 0xe() [ 23.910796] Calling initcall 0xffffffff8027bd77: atiixp_ide_init+0x0/0= xe() [ 23.910805] Calling initcall 0xffffffff8027c360: cmd64x_ide_init+0x0/0= xe() [ 23.910813] Calling initcall 0xffffffff8027d616: cs5520_ide_init+0x0/0= xe() [ 23.910819] Calling initcall 0xffffffff8027da30: cs5530_ide_init+0x0/0= xe() [ 23.910826] Calling initcall 0xffffffff8027e064: cy82c693_ide_init+0x0= /0xe() [ 23.910832] Calling initcall 0xffffffff8027e308: hpt34x_ide_init+0x0/0= xe() [ 23.910838] Calling initcall 0xffffffff8027e919: hpt366_ide_init+0x0/0= xe() [ 23.910844] Calling initcall 0xffffffff8060d4d4: it821x_ide_init+0x0/0= xe() [ 23.910851] Calling initcall 0xffffffff80280e05: pdc202xx_ide_init+0x0= /0xe() [ 23.910861] Calling initcall 0xffffffff80281d39: pdc202new_ide_init+0x= 0/0xe() [ 23.910878] Calling initcall 0xffffffff8060d4e2: piix_ide_init+0x0/0xc= 0() [ 23.910892] Calling initcall 0xffffffff802830b0: rz1000_ide_init+0x0/0= xe() [ 23.910902] Calling initcall 0xffffffff8028331f: svwks_ide_init+0x0/0x= e() [ 23.910912] Calling initcall 0xffffffff80283e83: siimage_ide_init+0x0/= 0xe() [ 23.910922] Calling initcall 0xffffffff80285410: sis5513_ide_init+0x0/= 0xe() [ 23.910933] Calling initcall 0xffffffff802868fc: slc90e66_ide_init+0x0= /0xe() [ 23.910948] Calling initcall 0xffffffff80286ffb: triflex_ide_init+0x0/= 0xe() [ 23.910958] Calling initcall 0xffffffff8028740d: via_ide_init+0x0/0xe(= ) [ 23.910968] Calling initcall 0xffffffff80287fb2: generic_ide_init+0x0/= 0xe() [ 23.910979] Calling initcall 0xffffffff8060d622: ide_init+0x0/0x74() [ 23.910988] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.910994] ide: Assuming 33MHz system bus speed for PIO modes; overri= de with idebus=3Dxx [ 23.911151] ICH5: IDE controller at PCI slot 0000:00:1f.1 [ 23.911195] GSI 18 sharing vector 0xB1 and IRQ 18 [ 23.911201] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low)= -> IRQ 177 [ 23.911234] ICH5: chipset revision 2 [ 23.911239] ICH5: not 100% native mode: will probe irqs later [ 23.911256] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,= hdd:pio [ 23.911304] Probing IDE interface ide1... [ 24.646177] hdc: HL-DT-ST RW/DVD GCC-4481B, ATAPI CD/DVD-ROM drive [ 25.341098] ide1 at 0x170-0x177,0x376 on irq 15 [ 25.365733] Calling initcall 0xffffffff8060e50f: ide_generic_init+0x0/= 0xf() [ 25.392412] Probing IDE interface ide0... [ 25.971777] Calling initcall 0xffffffff8060e51e: idedisk_init+0x0/0xc(= ) [ 25.997653] Calling initcall 0xffffffff8060e52a: ide_cdrom_init+0x0/0x= c() [ 26.024582] hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(3= 3) [ 26.050830] Uniform CD-ROM driver Revision: 3.20 [ 26.052895] Calling initcall 0xffffffff8060e536: idefloppy_init+0x0/0x= 1e() [ 26.052909] ide-floppy driver 0.99.newide [ 26.053185] Calling initcall 0xffffffff8060e554: cdrom_init+0x0/0xa() [ 26.053195] Calling initcall 0xffffffff8060e680: nonstatic_sysfs_init+= 0x0/0xc() [ 26.053215] Calling initcall 0xffffffff8060e68c: yenta_socket_init+0x0= /0xe() [ 26.060245] Calling initcall 0xffffffff8060e8a5: mon_init+0x0/0xf6() [ 26.060308] Calling initcall 0xffffffff8060e99b: usb_usual_init+0x0/0x= 8b() [ 26.060503] usbcore: registered new driver libusual [ 26.060508] Calling initcall 0xffffffff8060ea2d: hid_init+0x0/0x3e() [ 26.068132] usbcore: registered new driver hiddev [ 26.068322] usbcore: registered new driver usbhid [ 26.068325] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 26.068329] Calling initcall 0xffffffff8060ebcc: mousedev_init+0x0/0xb= 7() [ 26.069005] mice: PS/2 mouse device common for all mice [ 26.069010] Calling initcall 0xffffffff8060ec83: evdev_init+0x0/0x11() [ 26.069018] Calling initcall 0xffffffff8060ec94: atkbd_init+0x0/0x13() [ 26.069028] Calling initcall 0xffffffff8060eca7: psmouse_init+0x0/0x15= () [ 26.069035] Calling initcall 0xffffffff8060ecbc: md_init+0x0/0x118() [ 26.069041] md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 [ 26.069044] md: bitmap version 4.39 [ 26.069121] Calling initcall 0xffffffff80610458: flow_cache_init+0x0/0= x1d2() [ 26.070898] Calling initcall 0xffffffff8061062a: dv_init+0x0/0x3() [ 26.070911] Calling initcall 0xffffffff8061065e: llc_init+0x0/0x58() [ 26.070921] Calling initcall 0xffffffff806106b6: snap_init+0x0/0x2e() [ 26.070934] Calling initcall 0xffffffff806106e4: rif_init+0x0/0x7a() [ 26.070950] Calling initcall 0xffffffff80610815: blackhole_module_init= +0x0/0xc() [ 26.070962] Calling initcall 0xffffffff806115bc: inet_init+0x0/0x386() [ 26.114947] input: AT Translated Set 2 keyboard as /class/input/input0 [ 26.416768] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input= 1 [ 26.810118] NET: Registered protocol family 2 [ 26.885065] IP route cache hash table entries: 32768 (order: 6, 262144= bytes) [ 26.914892] TCP established hash table entries: 131072 (order: 10, 419= 4304 bytes) [ 26.951049] TCP bind hash table entries: 65536 (order: 9, 2097152 byte= s) [ 26.981439] TCP: Hash tables configured (established 131072 bind 65536= ) [ 27.008628] TCP reno registered [ 27.025519] Calling initcall 0xffffffff8032a377: init+0x0/0x11() [ 27.050851] Calling initcall 0xffffffff80611b66: init_syncookies+0x0/0= x16() [ 27.079017] Calling initcall 0xffffffff80611b7c: bictcp_register+0x0/0= xc() [ 27.106753] TCP bic registered [ 27.122839] Calling initcall 0xffffffff80611ce0: xfrm_user_init+0x0/0x= 4a() [ 27.150724] Initializing IPsec netlink socket [ 27.170915] Calling initcall 0xffffffff80611d2a: af_unix_init+0x0/0x66= () [ 27.198309] NET: Registered protocol family 1 [ 27.218496] Calling initcall 0xffffffff80611d90: packet_init+0x0/0x53(= ) [ 27.245572] NET: Registered protocol family 17 [ 27.266007] Calling initcall 0xffffffff805fc300: init_lapic_nmi_sysfs+= 0x0/0x34() [ 27.295816] Calling initcall 0xffffffff805fec6f: powernowk8_init+0x0/0= x6c() [ 27.324168] Calling initcall 0xffffffff805ff78c: centrino_init+0x0/0x1= c() [ 27.351917] Calling initcall 0xffffffff80157dd3: software_resume+0x0/0= x18c() [ 27.380471] Calling initcall 0xffffffff80240a90: acpi_poweroff_init+0x= 0/0x59() [ 27.409660] Calling initcall 0xffffffff806096a3: acpi_wakeup_device_in= it+0x0/0xe2() [ 27.439947] ACPI wakeup devices:=20 [ 27.457015] VBTN PCI0 PCI1 PCI2 PCI3 PCI4 PCI5 PCI6 KBD USB0 USB1 USB= 2 USB3=20 [ 27.486095] Calling initcall 0xffffffff806097a6: acpi_sleep_init+0x0/0= x9c() [ 27.514519] ACPI: (supports S0 S1 S3 S4 S5) [ 27.534619] Calling initcall 0xffffffff80240fc0: acpi_sleep_proc_init+= 0x0/0x6b() [ 27.564410] Calling initcall 0xffffffff8060af5f: seqgen_init+0x0/0xe() [ 27.591497] Calling initcall 0xffffffff8060cc3f: early_uart_console_sw= itch+0x0/0x7c() [ 27.614800] Calling initcall 0xffffffff802ead95: net_random_reseed+0x0= /0x4e() [ 27.651955] Freeing unused kernel memory: 224k freed [ 27.674625] Write protecting the kernel read-only data: 850k [ 27.781006] SCSI subsystem initialized [ 27.822936] libata version 1.20 loaded. [ 27.852140] ata_piix 0000:00:1f.2: version 1.05 [ 27.872793] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low)= -> IRQ 0 [ 27.901789] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 27.927731] ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0= irq 0 [ 27.956018] ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8= irq 0 [ 27.984182] Unable to handle kernel NULL pointer dereference at 000000= 0000000000 RIP:=20 [ 28.000848] <ffffffff802742c5>{make_class_name+27} [ 28.019121] PGD 3ecef067 PUD 3ecf0067 PMD 0=20 [ 28.019128] Oops: 0000 [1] SMP=20 [ 28.019131] last sysfs file: /block/ram0/dev [ 28.019133] CPU 1=20 [ 28.019135] Modules linked in: ata_piix libata sd_mod scsi_mod [ 28.019142] Pid: 393, comm: insmod Not tainted 2.6.14-1.1777_FC5 #1 [ 28.019144] RIP: 0010:[<ffffffff802742c5>] <ffffffff802742c5>{make_cla= ss_name+27} [ 28.019150] RSP: 0000:ffff81003ece1a38 EFLAGS: 00010246 [ 28.019153] RAX: 0000000000000000 RBX: ffff81003f539420 RCX: fffffffff= fffffff [ 28.019156] RDX: ffff81003f539420 RSI: ffffffffffffffff RDI: 000000000= 0000000 [ 28.019159] RBP: ffff81003f539420 R08: 0000000000000000 R09: ffff81003= ecc09f0 [ 28.019163] R10: 0000000000000002 R11: ffffffff88047033 R12: ffffffff8= 80272b0 [ 28.019166] R13: ffffffff880271c0 R14: 000000000000fea8 R15: 000000000= 0000000 [ 28.019170] FS: 000000000057e850(0063) GS:ffffffff805c7080(0000) knlG= S:0000000000000000 [ 28.019172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.019175] CR2: 0000000000000000 CR3: 000000003f5e0000 CR4: 000000000= 00006e0 [ 28.019179] Process insmod (pid: 393, threadinfo ffff81003ece0000, tas= k ffff81003fa3b7e0) [ 28.019181] Stack: ffff81003fe89080 0000000004000000 ffff810002a61b20 = ffff81003f539420=20 [ 28.019190] ffffffff880272a0 ffffffff8027454a ffffffff80593620 = ffff81003f539420=20 [ 28.019198] ffff81003f539000 0000000000000246=20 [ 28.019203] Call Trace:<ffffffff8027454a>{class_device_del+187} <fffff= fff80274605>{class_device_unregister+9} [ 28.019213] <ffffffff88003d4e>{:scsi_mod:scsi_remove_host+274} = <ffffffff88040a34>{:libata:ata_host_remove+16} [ 28.019247] <ffffffff88044221>{:libata:ata_device_add+3558} <ff= ffffff80139c05>{printk+78} [ 28.019264] <ffffffff80139c05>{printk+78} <ffffffff8016ac96>{po= ison_obj+35} [ 28.019274] <ffffffff802d8595>{pci_mmcfg_read+70} <ffffffff8020= fa41>{pci_bus_write_config_byte+79} [ 28.019286] <ffffffff802d6c22>{pcibios_set_master+126} <fffffff= f88044572>{:libata:ata_pci_init_one+633} [ 28.019300] <ffffffff8020fb36>{pci_bus_read_config_word+111} <f= fffffff802d854f>{pci_mmcfg_read+0} [ 28.019307] <ffffffff88059707>{:ata_piix:piix_init_one+465} <ff= ffffff802138e0>{pci_device_probe+248} [ 28.019321] <ffffffff80273b6b>{driver_probe_device+63} <fffffff= f80273c82>{__driver_attach+76} [ 28.019329] <ffffffff80273c36>{__driver_attach+0} <ffffffff8027= 36fa>{bus_for_each_dev+67} [ 28.019336] <ffffffff80273251>{bus_add_driver+115} <ffffffff802= 1363a>{__pci_register_driver+167} [ 28.019344] <ffffffff88065014>{:ata_piix:piix_init+20} <fffffff= f80154acd>{sys_init_module+278} [ 28.019354] <ffffffff8010f8ca>{system_call+126}=20 [ 28.019362]=20 [ 28.019362] Code: f2 ae 48 89 ca 48 f7 d2 48 8b 45 60 48 8b 38 48 89 f= 1 44 89=20 [ 28.019374] RIP <ffffffff802742c5>{make_class_name+27} RSP <ffff81003e= ce1a38> [ 28.019379] CR2: 0000000000000000 [ 28.019381] <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: d= m-...@re... [ 29.243103] cdrom: open failed. [ 29.288795] cdrom: open failed. [ 29.443190] Kernel panic - not syncing: Attempted to kill init! |
