From: Yury U. <um...@na...> - 2003-10-20 08:58:37
|
William Morgan wrote: >Dear ACPI gurus, > >I'm trying to get ACPI to work on a new Gateway 200x laptop. I'm running >kernel 2.6.0-test7 with the ACPI stuff compiled in directly to the >kernel. Right now not a whole lot is working. I'm mainly concerned with >the battery for the moment, but /proc/acpi/battery is empty. > >Here is the relevant portions of dmesg. Is this a broken DSDT a la some >other gateway laptops? Any help would be appreciated. > >--- cut here --- >Linux version 2.6.0-test7 (root@grappelli) (gcc version 3.3.2 20030908 (Debian prerelease)) #9 Sat Oct 18 09:47:12 EDT 2003 >Video mode to be used for restore is f00 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) > BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) > BIOS-e820: 000000001f6e0000 - 000000001f6ec000 (ACPI data) > BIOS-e820: 000000001f6ec000 - 000000001f700000 (ACPI NVS) > BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) > BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) > BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) >502MB LOWMEM available. >On node 0 totalpages: 128736 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 124640 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 >DMI present. >ACPI: RSDP (v000 PTLTD ) @ 0x000f7c90 >ACPI: RSDT (v001 PTLTD Montara 0x06040000 LTP 0x00000000) @ 0x1f6e7d39 >ACPI: FADT (v001 INTEL MONTARA 0x06040000 PTL 0x00000050) @ 0x1f6ebed2 >ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f6ebfd8 >ACPI: SSDT (v001 INTEL CPU0CST 0x00000001 INTL 0x20020725) @ 0x1f6e8182 >ACPI: SSDT (v001 INTEL EISTRef 0x00002000 INTL 0x02012044) @ 0x1f6e7d6d >ACPI: DSDT (v001 INTEL MONTARAG 0x06040000 MSFT 0x0100000e) @ 0x00000000 >Building zonelist for node : 0 >[...] >ACPI: Subsystem revision 20030918 > tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired >Parsing all Control Methods:............................................................................................................................................................ >Table [DSDT](id F006) - 521 Objects with 56 Devices 156 Methods 20 Regions >Parsing all Control Methods:. >Table [SSDT](id F003) - 1 Objects with 0 Devices 1 Methods 0 Regions >Parsing all Control Methods:.... >Table [SSDT](id F004) - 7 Objects with 0 Devices 4 Methods 0 Regions >ACPI Namespace successfully loaded at root c03c7cbc >evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful >evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000001028 on int 9 >Completing Region/Field/Buffer/Package initialization:........................................................ >Initialized 20/20 Regions 0/0 Fields 21/21 Buffers 15/15 Packages (537 nodes) >Executing all Device _STA and_INI methods:......................................................... >57 Devices found containing: 57 _STA, 4 _INI methods >ACPI: Interpreter enabled >ACPI: Using PIC for interrupt routing >evregion-0249 [21] ev_address_space_dispa: no handler for region(df667e28) [EmbeddedControl] > exfldio-0269 [20] ex_access_region : Region EmbeddedControl(3) has no handler > dswexec-0422 [13] ds_exec_end_op : [LEqual]: Could not resolve operands, AE_NOT_EXIST >dswstate-0273 [15] ds_result_pop_from_bot: No result objects! State=df653c28 > dsutils-0525 [15] ds_create_operand : Missing or null operand, AE_AML_NO_RETURN_VALUE > psparse-1120: *** Error: Method execution failed [\_SB_.ADP1._STA] (Node df66e1a8), AE_AML_NO_RETURN_VALUE >evregion-0249 [21] ev_address_space_dispa: no handler for region(df667e28) [EmbeddedControl] > exfldio-0269 [20] ex_access_region : Region EmbeddedControl(3) has no handler > dswexec-0422 [13] ds_exec_end_op : [LEqual]: Could not resolve operands, AE_NOT_EXIST >dswstate-0273 [15] ds_result_pop_from_bot: No result objects! State=df653c28 > dsutils-0525 [15] ds_create_operand : Missing or null operand, AE_AML_NO_RETURN_VALUE > psparse-1120: *** Error: Method execution failed [\_SB_.BAT1._STA] (Node df66dca8), AE_AML_NO_RETURN_VALUE >ACPI: PCI Root Bridge [PCI0] (00:00) >PCI: Probing PCI hardware (bus 00) >PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 >Transparent bridge - 0000:00:1e.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs *10) >ACPI: PCI Interrupt Link [LNKB] (IRQs *10) >ACPI: PCI Interrupt Link [LNKC] (IRQs *11) >ACPI: PCI Interrupt Link [LNKD] (IRQs *11) >ACPI: PCI Interrupt Link [LNKE] (IRQs *5) >ACPI: PCI Interrupt Link [LNKF] (IRQs 5) >ACPI: PCI Interrupt Link [LNKG] (IRQs 10) >ACPI: PCI Interrupt Link [LNKH] (IRQs *10) >ACPI: Embedded Controller [H_EC] (gpe 28) >evregion-0345: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER > dswexec-0422 [30] ds_exec_end_op : [Store]: Could not resolve operands, AE_BAD_PARAMETER > psparse-1120: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node df663e88), AE_BAD_PARAMETER >ACPI: Power Resource [PFAN] (on) >[...] >ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 >ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 >ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 >ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 >ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 >ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 >PCI: Using ACPI for IRQ routing >PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' >[...] >ACPI: Power Button (FF) [PWRF] >ACPI: Lid Switch [LID0] >ACPI: Sleep Button (CM) [SLPB] >ACPI: Fan [FAN0] (on) >ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) >evregion-0345: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER > dswexec-0422 [46] ds_exec_end_op : [Store]: Could not resolve operands, AE_BAD_PARAMETER > psparse-1120: *** Error: Method execution failed [\_TZ_.THRM._TMP] (Node df66eec8), AE_BAD_PARAMETER >[...] >evregion-0345: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER > dswexec-0422 [43] ds_exec_end_op : [LEqual]: Could not resolve operands, AE_BAD_PARAMETER >dswstate-0273 [45] ds_result_pop_from_bot: No result objects! State=df653c28 > dsutils-0525 [45] ds_create_operand : Missing or null operand, AE_AML_NO_RETURN_VALUE > psparse-1120: *** Error: Method execution failed [\_SB_.LID0._LID] (Node df66ce68), AE_AML_NO_RETURN_VALUE >--- cut here --- > >Any ideas or suggestions? Thanks. > > > Try test8. There were included important fixes to acpi subsystem. -- umka |