From: Peter R. <pe...@ra...> - 2011-05-08 16:18:21
|
My box has 21 SATA disks, some of them directly connected to the motherboard, others via LSI 3081E-R. OS is Solaris Express 11 x64 (2010.11 SRU5). Doing a "smartctl -d sat -a /dev/rdsk/c7t12d0" with smartmontools 5.39 on any of the disks delivers the expected output and no kernel warning. However, with 5.40 and everything else unchanged I get: May 8 17:55:01 rocky scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,2e21@1/pci1000,3140@0/sd@c,0 (sd7): May 8 17:55:01 rocky Error for Command: <undecoded cmd 0x85> Error Level: Recovered May 8 17:55:01 rocky scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0 May 8 17:55:01 rocky scsi: [ID 107833 kern.notice] Vendor: ATA Serial Number: MN1220 May 8 17:55:01 rocky scsi: [ID 107833 kern.notice] Sense Key: Soft_Error May 8 17:55:01 rocky scsi: [ID 107833 kern.notice] ASC: 0x0 (<vendor unique code 0x0>), ASCQ: 0x1d, FRU: 0x0 or (on another disk): May 8 17:31:39 rocky scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci1043,82d4@1f,2/disk@3,0 (sd3): May 8 17:31:39 rocky Error for Command: <undecoded cmd 0xa1> Error Level: Recovered May 8 17:31:39 rocky scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0 May 8 17:31:39 rocky scsi: [ID 107833 kern.notice] Vendor: ATA Serial Number: May 8 17:31:39 rocky scsi: [ID 107833 kern.notice] Sense Key: Soft_Error May 8 17:31:39 rocky scsi: [ID 107833 kern.notice] ASC: 0x0 (no additional sense info), ASCQ: 0x0, FRU: 0x0 How can I avoid these warnings (which reappear every 30 minutes from smartd)? |