Search Results for "framework-3-offline"

...More details available in: https://en.wikipedia.org/wiki/Wake-on-LAN For this program to work you have to: 1-Connect to the same network as the device you want to wake. 2-Enable Wake on Lan (WoL) feature on the device you want to wake. 3-Make sure the device is turned off or in sleep state. System requirements for WoL: 1-Smart TV must be manufactured in 2012 or newer. 2-Windows PC must be Windows 95 or newer. 3-Wake on Lan supported BIOS (Firmware)

...As the software is intended to be used on a USB drive, the WiFi profiles (the files that store the connection information) are encrypted to avoid revealing sensitive information in case the device is lost. It will run with admin rights in order to access WiFi keys. 1)Place this program on a USB device. 2)Run it, you will be asked to set up a new password. 3)Once it is done, choose Export profiles (or Synchronise profiles). 4)Exit the program and remove the USB device. 5)Plug the USB device into another computer, run it, enter the right password and choose Import profiles (or Synchronise profiles). You have successfully shared the password-protected WiFi connections from the first computer into the second one. ...

howmanypeoplearearound calculates the number of people in the vicinity using the approximate number of smartphones as a proxy (since ~70% of people have smartphones nowadays). A cellphone is determined to be in proximity to the computer based on sniffing WiFi probe requests. Possible uses of howmanypeoplearearound include, monitoring foot traffic in your house with Raspberry Pis, seeing if your roommates are home, etc. There are a number of possible USB WiFi adapters that support monitor...

openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

pyforward is a GTK+ front-end to three core linux technologies that make it possible to turn your computer into a wifi access point in infrastructure mode: 1. iptables - To enable routing of your requests. 2. dnsmasq - To assign ip-addresses using dhcp. 3. hostapd - To enable wifi access to your machine in infrastructure mode. Refer the wiki page for more information on how to run pyforward.

Moved to https://github.com/jbthomsen/WiresharkZigbeeUtility Utility enabling easy capture and monitoring of Zigbee frames in Wireshark. This simple utility program implements a named pipe between Wireshark and the Freescale MC1322x USB dongle (support for other devices can relatively easily be added).

Python script that plots access points from Inssider GPX wardrive capture to an html file displaying a Google map. Useful if you care about WPA and WPA2 data instead of just plain old WEP...

Application that monitors power level and noise of wireless networks 802.11 in Unix environments.

Downloaded the latest version of Wifix from the new project center, https://launchpad.net/wifix Linux Download: WiFix intends to simplify wireless card detection and driver installation under Linux by downloading, compiling and install

ra0dar is a wireless network scanner and graphical configuration utility to easily setup Ralink RT61 based cards.

Execute commands on Linux using Symbian series 60 phone and bluetooth.