Search Results for "libbiosig-3.dll"

wavemon is a wireless device monitoring application that allows you to watch signal and noise levels, packet statistics, device configuration and network parameters of your wireless network hardware. It should work (though with varying features) with all devices supported by the Linux kernel. Apart from debian/ubuntu packages and slackbuild scripts for wavemon, this repository contains the full source code.

Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners! Version 3 is in development. It is stable to use, but it is very different. It is command-line based, which allows it to offer not just more features, but make them more customizable. This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. ...

howmanypeoplearearound calculates the number of people in the vicinity using the approximate number of smartphones as a proxy (since ~70% of people have smartphones nowadays). A cellphone is determined to be in proximity to the computer based on sniffing WiFi probe requests. Possible uses of howmanypeoplearearound include, monitoring foot traffic in your house with Raspberry Pis, seeing if your roommates are home, etc. There are a number of possible USB WiFi adapters that support monitor...

pyforward is a GTK+ front-end to three core linux technologies that make it possible to turn your computer into a wifi access point in infrastructure mode: 1. iptables - To enable routing of your requests. 2. dnsmasq - To assign ip-addresses using dhcp. 3. hostapd - To enable wifi access to your machine in infrastructure mode. Refer the wiki page for more information on how to run pyforward.

This project is a Linux Kernel 2.4/2.6/3.x module/console program for changing wireless radio status on the Fujitsu Siemens AMILO A1655G laptop.

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

The FLEXOR is a software architecture that is designed to support the testing and management of WSN protocols and applications in a flexible way. Its main goal is to provide run-time support to experiments on backchannel-free sensor networks.

Moved to https://github.com/jbthomsen/WiresharkZigbeeUtility Utility enabling easy capture and monitoring of Zigbee frames in Wireshark. This simple utility program implements a named pipe between Wireshark and the Freescale MC1322x USB dongle (support for other devices can relatively easily be added).

nwWimaxAsnCp library is implementation of WiMAX ASN Control Protocol stack as per WiMAX forum specification release 1.0. WiMAX Base Stations and ASN Gateways make use the protocol for control plane signaling on R4, R6 and R8 interfaces.

We implement a new IP address auto-configuration mechanism for MANET. The proposed mechanism lets any nodes in a MANET distribute address pools to a new node. The proposed algorithm can guarantee address uniqueness and achieve fast address assignment

Cor is a layer 3+4 protocol for zero administration (community/mesh) networks. It is implemented as a linux kernel patch. Check out this website for more details: http://michaelblizek.homelinux.net/projects/cor/index.html

Simple Wireless is a C++ library that provides simple wireless networking functions for Arduino boards, using many inexpensive radio modules. Simple Wireless uses the Virtual Wire library (by Mike McCauley) as the physical layer.

Python script that plots access points from Inssider GPX wardrive capture to an html file displaying a Google map. Useful if you care about WPA and WPA2 data instead of just plain old WEP...

The OLSRd software as available from www.olsr.org is extended to take into account the cost of each available link. Link cost is expressed in terms of ETT (Expected Transmission Time), taking into account not only ETX but also medium speed (bits/second).

This plugin implements a certificate distribuition service for Mobile Ad Hoc Networks based in OLSRd (www.olsr.org).

Add 3.5G USB dongle support on ASUS RT-N13U The RT-N13U UI is good enough, so I don't change much. Only add 3.5G setting in advance setting--> USB Application This FW supports HUAWEI E169 E220, Bandluxe C270, OPTION 225 now.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

Many people have met the challenge of finding out their location, while not having a gps. We have developed a solution to this challenge. wLBS is the world's first completely open Wi-Fi geolocation system.

Application that monitors power level and noise of wireless networks 802.11 in Unix environments.

Redirect IPv6 hosts to a web page to tell about existing IPv6 connectivity (e.g. in a venue where WLAN is IPv6). It intercepts all DNS requests (acting as a server), then either proxies the request to a real server or redirects to a captive portal.

User-land IP packet switching daemon. Can do IP accounting, packet filtering and NAT. Remotely controlled.

TheWirelessObserver is a monitoring framework for Cisco Wireless Controller(s). It tracks the status of controllers, access points, clients etc. The collected data is stored into a database and can be viewed by a web frontend.

Kismet GUI written in Qt

This program is to control your UMTS PCCard: enter SIM PIN code, send and receive SMS and control/monitor the network connection.