Search Results for "pyserial"

pyModSlave is a free python-based implementation of a ModBus slave application for simulation purposes. You can install the python module or use the precompiled (for Windows only) stand alone GUI (Qt based) utility (unzip and run). pyModSlave also includes a bus monitor for examining all traffic on the bus. You can also download it from pypi <https://pypi.org/project/pyModSlave/>. pyModSlave is based on modbus-tk <http://code.google.com/p/modbus-tk/>, pySerial <https://github.com/pyserial...

A nice and simple solution to control and test the masla.de relay devices. It provides a schematic or overview to easy switch relays on or off. The USB interface of the devices makes a connection easy. Written in python and use of pygtk and pyserial it can be used flexible on several platforms. And it's just a example to control the relay-devices to help you write your own program.

Use an Arduino Mega 2560 board to interface between an MCS2100-LTS-50W treadmill control board and a PC using the USB-serial link. Python with a TKinter GUI is used for main control using multiprocessing. A simplified serial driver is used instead of pySerial.

Multiplatform Serial Port Module for Python (Win32, Jython, Linux, BSD and more)

.../ need pyserial : http://sourceforge.net/projects/pyserial/ need wxpython : http://www.wxpython.org/ Gui build with wxFormBuilder (but not need to execute) : http://sourceforge.net/projects/wxformbuilder/ tested on Linux, WinXP, Win7 copyright 2015 Jean Ingrasciotta ginoingras@gmail.com

Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus...

Simple terminal program based on pySerial for raw binary / ascii communication with microcontrollers and such. Features local echo and automatic modulo-256 checksum and CR/LF postfix.

Cross-platform Serial to TCP forwarding with multiple connection and logging support. Requires python (python.org) and pySerial (pyserial.sourceforge.net)

pyOBD-II (a.k.a. "pyobd2") is a Python library for communicating with OBD-II vehicles. Its goal is to make writing programs for vehicle diagnostics and monitoring vehicle data as easy as possible. Relies on pySerial to communicate with ELM scanners.

Use of USB to Serial and USB to Parallel BUS CONVERTERS available from ElectronicBRICKS at http://electronicbricks.blogspot.com/search/label/usb-Brick.

Pure Python I2C protocol interface over pySerial, pyParallel, ...

This project aims to develope the Python code necessary to enable external PC hardware to connect to the Blender UI and Gaming engine. This project currently requires schematic design, hardware design, python programming of Serial Ports through pyserial, knowledge of the Blender API, and knowledge of the FTDI Chip. This project will not seek funding until a proof of concept is documented with code and hardware designs available through this project. This project will be soon seeking...