Search Results for "voltage"

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter

...There are two circuit boards which are the main controller board and the Timer/Regulator board. The Main controller board performs all the processing of the system. The timer/regulator board converts the 12vdc input voltage to the 3.3v and 5v DC voltages used by the main controller board. The timer/regulator board communicates with the main board via a serial communication cable. The timer/regulator board can be commanded by the main board to power the system down for a precise interval in order to conserve battery power. A Web-based control panel SW is included.