Search Results for "access control system"

This is a Java library, which gives low level access to the WS300 weather station from ELV (http://www.elv.de/). There is a web frontend included which displays the weather data in a browser. The following hardware is supported: * WS300 PC (USB) * IPWE1 (LAN) * Raspberry Pi with FS20WUE (LAN)

mySQM+ Sky Quality Meter/Weather Station (c) R Brown, 2020-2025, All rights reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author(s). EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

This small project sits in my kitchen and provides simple access to the times of all local public transport services that you can use. One button cycles: a clock, bus arrival times at the local stop to a preset destination, trains to a specific destination and finally a summary weather forecast (if you need an umbrella!) It does not cover the Underground as these services are so frequent to not require a timetable. It runs adequately on an old Pi Zero W. All the APIs are free, but the...

The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)...

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter

...A Web-based control panel SW is included.

A weather-station control system for the AAG WSI-603 weather station and other 1-Wire based systems. Uses the OWFS 1-wire file system as the interface to 1-Wire system

The service takes advantage of the environmental control networks existing along the city of Bilbao and the indicators elaborated by their data. These networks consist in a number of networked meteorological stations metering atmospheric variables and other related to pollution, level of pollen in the air, etc. The system uses other data sources in order to provide the user with a complete information overview, including predictions, and taking account predictive simulation and risk models that are being used by some public administrations. ...