Search Results for "16"

Display, log and upload data to the internet from your Oregon Scientific or AcuRite 02032C weather station. The Arduino WxShield also supported. See project web site for FAQs. Use Open Discussion for support requests.

...Extremely low power consumption (several weeks between charges) Idea based on David Bird's original weather display which I couldn't get to work as Weather Underground had closed down (https://github.com/G6EJD/ESP32-8266-ePaper-Weather-Display-Examples) Programming done using Arduino with the Waveshare ePaper library (https://github.com/waveshare/e-Paper/tree/master/Arduino%20UNO/epd2in13/epd2in13) and the Arduino Json library (https://github.com/bblanchon/ArduinoJson.git) Hardware: * TTGO T5 v2.13 * Li-Ion battery You will need to modify the pin settings in the Waveshare library (epdif.h) to match those that you are using. The pins for the TTGO T5 were found to be: //TTGO T5 #define RST_PIN 16 #define DC_PIN 17 #define CS_PIN 5 #define BUSY_PIN 4 #define EPD_CLK 18 #define EPD_MOSI 23

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter