Search Results for "multi-system"

This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE,...

mySQM+ Sky Quality Meter/Weather Station (c) R Brown, 2020-2025, All rights reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author(s). EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

This is a Java library, which gives low level access to the WS300 weather station from ELV (http://www.elv.de/). There is a web frontend included which displays the weather data in a browser. The following hardware is supported: * WS300 PC (USB) * IPWE1 (LAN) * Raspberry Pi with FS20WUE (LAN)

The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)...

WeeWX driver for Wario ME11/12/13/15 station Copyright 2014-2020 Frantisek Muller For WeeWX version 4.x and higer (Python 3 support only) Wanet driver for ME11/12/13/15 weather station by WANET download data from a ME11/12/13/15 for use in weewx version 4 and higher Web site for stations Wanet http://www.meteo-pocasi.cz/

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter

Ws2300 manipulates the LaCrosse WS-2300 weather station via its RS232/USB interface. It can read and write values, and can continuously log data from WS-2300 to a file or SQL database. All available documentation can be read online at http://ws2300.sourceforge.net/

...Hardware requirements are RTL-SDR dongle (e4000 or R820T tuner ), external antenna, and a PC. As additional software, it is necessary to have SDR Sharp and Virtual Audio Cable. The whole system was tested on Windows 7 64 bit OS

...There are two circuit boards which are the main controller board and the Timer/Regulator board. The Main controller board performs all the processing of the system. The timer/regulator board converts the 12vdc input voltage to the 3.3v and 5v DC voltages used by the main controller board. The timer/regulator board communicates with the main board via a serial communication cable. The timer/regulator board can be commanded by the main board to power the system down for a precise interval in order to conserve battery power. ...

WeeWX is a free, open source, software program, written in Python, which interacts with your weather station to produce graphs, reports, and HTML pages. Downloads can be found at http://weewx.com/downloads Development happens at https://github.com/weewx/weewx

wview is a unix application for weather stations. It archives weather data from the station. Generates full html web sites with graphics. ftp/ssh export capability. MySQL/PostgreSQL archiving. International. Weather alarms. Data feed. RSS feed.

Oww (One-Wire Weather) is a server and client for Dallas Semiconductor / AAG 1-wire weather station kits.

A weather-station control system for the AAG WSI-603 weather station and other 1-Wire based systems. Uses the OWFS 1-wire file system as the interface to 1-Wire system

wx200d is a weather station data collector and server daemon for the WX200, WM918, WMR918 and WMR968 weather station hardware.

A Java-based system for the collection and display of data from a Dallas Semiconductor 1-wire personal weather station, as well as common additional 1-wire sensors.

gwx is a graphical GTK+ wx200d(8) client that looks and feels like the WX200 weather station hardware. An interactive, resizable picture of the hardware displays the current weather conditions in a window.