Search Results for "control"

mySQM+ Sky Quality Meter/Weather Station (c) R Brown, 2020-2025, All rights reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author(s). EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.) and the server, which is connected to a remote database and will be visualized/controlled on desktop computers, tablets and/or smartphones. ...

#ESP.Meteo: Solar Wi-Fi weather station on ESP12 + ionistor + solar panel Current Functionality: *Forecasting the probability of frosts (according to the methods of Professor Brounov) *Forecast of the height of the lower edge of the cloud (VNGO by Selezneva) *Calculation of the height of the sensor according to the barometric formula (altimeter, for other projects) *Measurement of street temperature *Measurement of outdoor humidity *Measurement of street pressure *Calculation of the dew point *Monitoring of voltage on ionistors (charge-discharge control) *Monitoring the opening of the box flap with potatoes *Monitoring the system time-out every 5 minutes (operating time ~ 480 ms) *Monitoring the temperature on the balcony (the ability to connect up to 16 sensors DS18B20: 2 groups of 8 sensors per two APIKEY) *Sending data to the Thingspeak cloud *Sending data to Twitter

...The timer/regulator board communicates with the main board via a serial communication cable. The timer/regulator board can be commanded by the main board to power the system down for a precise interval in order to conserve battery power. A Web-based control panel SW is included.

A weather-station control system for the AAG WSI-603 weather station and other 1-Wire based systems. Uses the OWFS 1-wire file system as the interface to 1-Wire system