Search Results for "java swing project"
Sort By:
Showing 41 open source projects for "java swing project"
View related business solutions-
Error to trace to log to deploy. One click. No SSH.AppSignal links every error to the trace, the trace to the log, the log to the deploy that shipped it.
-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
1
StarFishDAQ
A general purpose data acquisition system and development platform.
The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in... -
2
JDiskMark
Java Disk Benchmark Utility
JDiskMark is a powerful and versatile disk benchmarking tool written in Java, designed to help accurately measure the performance of your storage devices across different operating systems. Whether you're testing HDDs, SSDs, or network drives, JDiskMark provides reliable insights into your disk's read and write... -
3
This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.
-
4
jfDataLogger
PLC Data Logger
jfDataLogger ============ jfDataLogger can log data from PLC controllers. Supports Hardware: - Siemens S7-300/400 PLCs - AllenBradley (CompactLogic Controllers only) - ModBus IP protocol - National Instruments DAQmx System Features: - Trigger bit at start - Save/Load data set - Save Image - log to CSV Website: http://jfdatalogger.sourceforge.net -
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
5
RSSceSim
RSSceSim - Reputation System Scenario Simulator
RSSceSim is a simple and easy to extend simulation tool for reputation models that can be used for testing, comparing and benchmarking reputation system metrics under specific scenarios. -
6
SportsTimer
GUI tool to manage timer/round based sport events
-
7
jRCaLc
jRCaLc is a program designed to aid you in working with resistors.
jRCaLc is a resistor calculator outfitted with various tools, meant to aid in work related to resistors. -
8
JPIV
Particle Image Velocimetry
JPIV is a platform independent, graphical stand-alone application for Particle Image Velocimetry (PIV) written in Java. PIV is an optical technique for measuring fluid flow velocities. JPIV moved to GitHub. Please visit us at: https://eguvep.github.io/jpiv/ -
9
CSV Comparator
CSV Comparator is a tool for comparing files which contain CSV-Data.
CSV Comparator is a tool for comparing files which contain CSV-Data. It was created for performance engineers to be able to have a easy way to compare data from two testruns and be able to automate the comparing process of various files with scripts. There is a command line tool as well as a user interface. In case you need to compare .xml-Files you can convert them to .csv-Files with my other project CSV Transformer. The advantages by using CSV as input and output are the... -
Host LLMs in Production With On-Demand GPUsDeploy your model, get an endpoint, pay only for compute time. No GPU provisioning or infrastructure management required.
-
10
vision2
Binocular vision examination using shutter glasses
Vision2 serves as tool for ophthalmologists and other vision testing professionals. It's useful for a variety of ophthalmology testing applications related to stereo vision. It implements many of classical tests but also new types of vectographic and random dot exams. Program was created as part of diploma thesis in Wroclaw University of Technology in Poland. -
11
Ava: Testdata Xsl
generates Testdata on base of excel: creates xml,excel,csv,html,sql,+
this tool for test-data-generation receives an 'excel-sheet' as primary input. second important paramter is the 'number of test-records to produce'. The excel-data will be reused as long data is needed. This tool is hightly paramatrisazable by the use of 'xsl scripts'. data can be created, updated, modified and finally exported in a format of your choice Main Fuctions: (1) Generates Testdata (excel, xsl, xml) (2) Exports generated testdata in multiple formats (csv, excel, html,... -
12
EDM Calibration Baseline Fitting
EDMFit is an adjustment tool to estimate EDM calibration parameters.
An EDM calibration baseline is used to derive specific instrument errors of the electronic distance measurement (EDM) unit of a total station. EDMFit is a simple adjustment tool to estimate the EDM calibration parameters (addition constant and/or scale parameter). The adjustment process is according to ISO 17123-4. The parameters are checked for significance, to avoid an overestimation. Based on two classical hypothesis testing, EDMFit provides a reliable outlier detection. For... -
13
FPF_predict
Fine Particle Fraction (FPF) predictor
Application implements models described by classical mathematical equation for in vitro deposition prediction based on characteristics of formulation and assay conditions. This work was funded by Poland-Singapore bilateral cooperation project no 2/3/POL-SIN/2012. Published article: https://www.dovepress.com/empirical-modeling-of-the-fine-particle-fraction-fornbspcarrier-based--peer-reviewed-fulltext-article-IJN -
14
Network Analyzer
Analyze the network carateristics like Delay, Jitter, Packet loss etc.
This software is a very simple network analyzer. When you click the start button, it will send a configurable stream of UDP packets to a host. (The receiving host is then required to echo all the packets back to the sender, which can be easily done via iptables rule under linux). Once the eched packets arrives back to the sender, the analyzer will calculate all the related statistics like, packet loss, jitter throughput etc... NOTE: in order to receive the echo packets you must... -
15
Soundcard Digital Voltmeter
Measures analog DC signals with the PC soundcard.
With this software and a simple external hardware, the sound card input of a PC can be used to measure stationary or slowly changing analog signals (e.g. voltages). The hardware converts the input signal into a voltage proportional frequency. The software measures the frequency via the sound card and calculates the corresponding input signal level which is displayed numerically and in a “scope-like” view. -
16
TikiOne JaCoCoverage
Java (6&7) Code Coverage Plugin for NetBeans, based on JaCoCo
NetBeans module that provides JaCoCo code coverage (Java7 compatible). For Ant based JavaSE projects. Maven and Gradle support may be added later. WARNING: Binary files have been removed. They're now on a NetBeans update center. Please check https://github.com/jonathanlermitage/tikione-jacocoverage#download-stable-and-dev-builds for details. ~Jonathan Lermitage <jonathan.lermitage@gmail.com> -
17
Flint
Free Chromatographic Integrator
Flint is a small Java based integrator for use on chromatography data. In time another project called Tinder will support a GUI for use together with Flint. -
18
JPacketGenerator
UDP Packet Generator (Stream generator)
...Works with a packet receiver to control the network status as Bandwidth, RTT, jitter, Loss % etc etc... Set Source Address, Destination address - Port Packet Size Stream Bandwidth And press start Command Line interface available java -jar JPacketGenerator.jar srcAddress srcPort dstAddress dstPort bitRate_bps All parameters are mandatory and with parameters the generator require no GUI or windows manager to work. If The project will be useful I'll post some more detail or helps about the usage. -
19
The project offers support for NTC thermistor calculations. The Steinhart-Hart equation is a mathematical model for these thermistors. Software to calculate the coefficients based on temp-resistance tables and functions allowing conversion are provided.
-
20
sphereGL
Stroop test using OpenGL
This is a java application using JMonkey API. The project has been completed using C++, however for this version it will use java to make it easier to use.The task involves letting the subject know that he must select a particular colored and shaped object. However, the instruction will be written in a different color than the requested selection. -
21
zephyr
Experiment automation
Zephyr is a script-driven experiment automation program that works various measurement instruments and actuators. It supports instruments from Agilent, Eco Physics, ICS Electronics, Keithley, Omega, Teledyne and other manufacturers. The script language is XML-based. Syntax highlighting is available. The source code is included in the distribution. Contact the project admin to get SVN access. -
22
Unit Converter
Converts length, temperature, and volume.
This app converts length, temperature, and fluidic volume. -
23
iTLogger
Log and evaluate data from your smartphone and OBD
iTLogger is the result of a software project at TU Ilmenau in 2012. Its aim was to create an app and corresponding desktop programm, so that people could track their journey on forest roads and later evaluate the data on their desktop. With the logged data you can evaluate the quality of forest roads. Available on Google Play: https://play.google.com/store/apps/details?id=de.tui.itlogger -
24
-
25
WSNWARE is an open source Java/OSGi middleware, designed for monitoring, controlling and standardizing Wireless Sensor Network. WSNWARE is a normalized message oriented middleware running on (and developed for) any OSGi containers.
