Search Results for "software auth program"
Sort By:
Showing 22 open source projects for "software auth program"
View related business solutions-
Earn up to 16% annual interest with Nexo.Put idle assets to work with competitive interest rates, borrow without selling, and trade with precision. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's... -
2
QTronics ToolSet
Includes tools for performing electronic calculations.
This program contains many tools for you to perform detailed electronic calculations. Ohms, Kirchhoff, Parralel Res., Voltage Divider, Wheatstone, Reistor Color, Zener diode, LED resistor, capacitor, inductor, transformer, capacitive reactance, Transformerless adaptor, R-C Time calculator, Flip-Flop, NE555 calculator, TL431 calculator, 78XX, LM317, Current Limiter, Transistor Regulator, Current Mirror, Battery charge calculations, transistor calculator, mosfet, pass filters, opamp,... -
3
This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.
-
4
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
...A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset -
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
5
Qgama
Adjustment of local surveying networks, binary builds for Windows
...Qgama is a Qt based user interface for GNU Gama adjustment of geodetic networks in which XML input is complemented with a database. The most simple case is Sqlite3 file database, which does not need any special knowledge from the user. http://www.gnu.org/software/gama/qgama Command line program gama-local is distributed with Qgama in folder bin. -
6
hcfr
Free Video Projector/Monitor Calibration Software
Video Projector/Monitor Calibration Software orginally developed as ColorHCFR. This code base is based off version 2.1 and will aim for a more open development process. The opensource version integrates an ArgyllCMS interface for continued meter support and development. If you feel the program has been of value to you since I started working on it about 3 years ago please consider a contribution via the link below. -
7
The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ......
-
8
Command line FFT
A simple command line utility to produce an FFT/IFFT of ASCII data
Ever had a bunch of ASCII data that you would like to have a quick look at in frequency domain, but don't want to fire up some bulky analysis software package just for that? Well, I have... So I wrote this tiny tool. It is based on fftw (www.fftw.org) and boost's program options (boost.org). cli-fft is really simple: All it does is to receive ASCII data from a file or standard in, FFT it and write out the result into a file or to standard out. -
9
rawi2ctool
RAW I2C command line tool for debug, test and more
This is a Linux command line tool to do raw I2C accesses to a bus, IF SUPPORTED BY THE ADAPTER, to probe the bus, read or write some data, detect glitches, do a bench, program an EEPROM with the required blocksize, test the I2C bus driver, ... Raw I2C mode enables data frames that are not supported by SMBus and related tools (such as i2cget, i2cset, i2cdump) -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
Heat transfer performance
Program to monitor heat exchangers units in industrial plants.
Heat exchangers performance monitoring in industrial plants. The software, developed in visual basic 6, has the capability to input design and actual operating data and compute the water fouling base on meccanical and physical data of the exchanger. The program can bu used for coolers, condensers and exaust steam condenser. The program has inside already several fluids for which are calculated the phisical characteristics as conductivity, heat capacity, density, viscosity and latent heat and condensing temperature specifically for steam. ... -
11
Nanopuller
AFM puller control software
...However, one advantage of using a commercial setup – repeatability and unification, cannot be archived, as every laboratory is developing a specific data acquisition protocol and software. Our Nanopuller software (open ISC license) presented here is intended to eliminate this obstacle. We give access to a program, which with only a minimum effort can be adjusted for vast array of typical equipment. -
12
PS Matching in SPSS
Propensity score matching in SPSS
Propensity score matching in SPSS Provides SPSS custom dialog to perform propensity score matching. Using the SPSS-R plugin, the software calls several R packages, mainly MatchIt and optmatch. Proper citations of these R packages is provided in the program. -
13
TASC NASA
Tool for Analysis of Surface Cracks (TASC)
TASC - 2014 NASA Software of the Year Co-Winner! TASC V1.0.2 is now available. - See users manual for release details Tool for Analysis of Surface Cracks (TASC) is a computer program created in MATLAB to enable easy computation of nonlinear J-integral solutions for surface cracked plates in tension by accessing and interpolating between the 600 nonlinear surface crack solutions documented in NASA/TP–2013-217480. -
14
SpeedScope
Spectrum Analyzer Software
SpeedScope 2014 is developed for use with doppler microwave sensor or any other sensor (like ultrasound doppler probe) which requires some kind of FFT processing (actually we do not use FFT but for the sake of simplicity...). Data is collected via PC sound card interface so sensor output parameters need to satisfy sound card input requirements. This application is portable, it does not write anything to registry (or anywhere else). This app does not 'phone home' or collect any user... -
15
SimAssem
For processing and/or simulating species assemblage data.
SimAssem is a tool for investigating the performances of species richness estimators across widely ranging assemblages and survey designs. Assemblages are simulated by specifying the: 1) number of species, 2) total abundance of individuals, 3) abundance distribution, 4) spatial configuration, 5) species detection probabilities, 6) survey design, and 7) number of grid cells to survey (out of a square grid comprised of 10,000 cells). SimAssem also processes existing encounter data and formats... -
16
Screenograma
Screenograma is an interface automation tool with feedback.
...Currently the program has a minimalistic interface which aids the creation of the script. -
17
Virtual Sound Level Meter
Virtual Sound Level Meter for analyzing calibrated sound files
This project is the MATLAB development of a virtual sound level meter. The program will read in a calibrated .wav file and allow the user to analyze it as one would analyze a sound field with a sound level meter. The software implements Fast, Slow, Impulse and LEQ; A, C and Flat Weighting; Ln and Noise Dose analysis; Octave and 1/3 Octave band analysis; high resolution FFT analysis and spectrograms. Band analysis can be made using fast FFT methods or slower, but ANSI standard methods. ... -
18
LibreAquarium
An aquarium management software with a Simulation Model System
...With all the records, the Simulation Model predicts the algae risk too (low,medium,high) and the algae type(green,cyanotic.) using the Redfield coefficient. Appart from that, the program tries to bring another modest contribution to Open Source Software and the World of Aquariums. SME LibreAquarium helps to daily maintenace of the aquarium with habitants control(fishes,plants, invertebrates), expenses, statistics, alarms, etc. -
19
comStudio
Serial communication utility
...And (if you think it's the case) do not hesitate to recommend the program to your friends. -
20
JohanneumSTM
Data logging and visualization in 2D and 3D for STMs.
This is a project we - ten students, 16 to 18 years old, and one teacher - are currently working on in the so called "Physik-Projektkurs" at school in which we build and program our own scanning tunneling microscope. This software is designed for DAQ systems by BMCM (we use the USB-AD16F), but it should not be too difficult to adapt it to foreign systems.It currently supports resolutions up to 1024x1024, visualization in 2D and 3D using colors from predefined gradients, export to PNG, CSV, OBJ and more! ... -
21
Wizard-like software to run experimental procedures (at large). Each step of the procedure is a file (document, on-line form, checklist, video, program... ). Experimental data and documents are backuped together. NEW: templates of procedures
-
22
A library to process X-ray images from the Heimann imaging system. The XGray library has interfaces to C++ and Tcl and includes the graphical program XRayLab, which is written Tcl.
- Previous
- You're on page 1
- Next
