Search Results for "simple queue system"
Sort By:
Showing 13 open source projects for "simple queue system"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
1
StarFishDAQ
A general purpose data acquisition system and development platform.
The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in... -
2
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus... -
3
RSSceSim
RSSceSim - Reputation System Scenario Simulator
RSSceSim is a simple and easy to extend simulation tool for reputation models that can be used for testing, comparing and benchmarking reputation system metrics under specific scenarios. -
4
wxPi
A simple local weather recorder for Raspberry Pi ZeroW
An expandable networked weather recorder hosted on Raspberry Pi ZeroW, with associated sensor hardware. -
PRTG Catches Network Issues Before They Cause DowntimeReactive troubleshooting usually means hearing about a problem from frustrated users, not your monitoring tool. PRTG sets threshold-based alerts across devices, servers and applications, notifying your team by email, SMS or push the moment a metric crosses a set limit. That means catching a failing disk or overloaded server before it becomes an outage and getting time back from firefighting. Start a free trial and set your first alerts today.
-
5
experix laboratory control system
instrument control, data acquisition display and analysis
Experix is a command-line driven environment for laboratory data acquisition and device control and graphical presentation and analysis of data. Written in C for GNU-Linux . Tested on PC and Raspberry Pi. The core is written very generally in order to support applications by means of script files. Device interfaces: PCMCIA daq (2 devices tested) via kernel module with interrupt handler and memory-mapped data; USB daq (1 device tested) using libusbx; running an equipment servicing program... -
6
Perl OBD-II Logger
A Perl program for logging OBD-II PID data
The goal of the Perl OBD-II Logger project is to create a flexible and efficient application that can capture and log OBD-II Mode 0x01 PID data from an automotive scantool. It is designed with accurate and efficient PID data logging in mind, and provides NO support for reading or resetting diagnostic trouble codes. By default, the output log file contains time-stamped PID values in a simple Comma Separated Values (CSV) format that can be readily imported into popular data analysis or... -
7
NetworkSpeed
Simple tool to display network traffice
2018/05: Project moved to GitHub. https://github.com/mdevoldere/NetworkSpeed NetworkSpeed displays live network traffice. User can select interface to display. -
8
Network Analyzer
Analyze the network carateristics like Delay, Jitter, Packet loss etc.
This software is a very simple network analyzer. When you click the start button, it will send a configurable stream of UDP packets to a host. (The receiving host is then required to echo all the packets back to the sender, which can be easily done via iptables rule under linux). Once the eched packets arrives back to the sender, the analyzer will calculate all the related statistics like, packet loss, jitter throughput etc... NOTE: in order to receive the echo packets you must... -
9
LabMonkey Embedded Automation Platform
Create networks of embedded devices for data logging/automation tasks.
LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and... -
Demo Series - Small Business Backup By VeeamWatch this on-demand demo series and learn how to protect your Microsoft 365 data with clear, simple, actionable steps that are easy to implement for businesses of all sizes.
-
10
jLlama is a desktop application to monitor servers over SSH. Any figure retrieved from the command line can be polled and graphed in real time. Out of the box, jLlama can graph CPU and Memory usage for Linux and Solaris servers.
-
11
ContactAngle is a simple and easy-to-use program to extract contact angles from videos of liquid droplets on a surface.
-
12
For starters a DirectX (Direct3D-Panel) A suite to display simple x/y/measurements, which has to be fast, because those analogue position encoders never "rest" at the same position and we want to see our table-position in realtime (mswin-realtime)
-
13
Network Weight Indicator Connector. Server/client .NET 2.0 application for connecting 1 or more weight indicators to a PC and sharing measured values over TCP/IP network using UDP. Offers simple but robust INI configuration of any WI processor unit type.
- Previous
- You're on page 1
- Next
