Search Results for "firmware/marble"

Firmware mod for the GWInstek GPP-x32x series lab bench supply.

... Electronic's GMC-300/500/600 Geiger counters, RadMon, Gamma-Scout Geiger counters, audio-click Geiger counters, IoT devices, I2C based sensors. New is the support of the RadPro firmware, suitable for various low-cost Geiger counters. GeigerLog reads data from devices, saves them to databases, prints to screen and plots as auto-updated, customizable graphs. Quality control using Statistics, Scatter, Poisson, FFT & Autocorrelation, and more. The Raspberry Pi 5 qualifies as full GeigerLog host.

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory...

The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in proof...

... of provided via FLTK. Also hosted here are the service and operators' manuals for this instrument, as well as dumps of the firmware from the EPROM. Many thanks to those who have preserved these for posterity (the 2.79 and 2.86 firmware dumps where generated by me - the rest has been collected from around the 'net).

Localization system for ZigBee networks. Based on the analysis of RSSI, estimates the positions of the mobile nodes. Firmware in C for the ZigBee modules. Java service produces results in a accessible webservlet, the user can manage the WSN network.

Electronics schematics, PCB images, firmware and documentation to create and deploy a network of ecology related sensors.

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.

A Python GUI, firmware in c, and schematics for a simple USB-powered device that sets and reads voltages from, and powers, a circuit under test.

Firmware for hardware which may communicate with the "Brick Daemon" ( http://github.com/Tinkerforge/brickd )