Terminal like program with integrated LUA interpreter and specifically designed to use with Wavecom wireless modules.
PICnomeSerial is the communication auxiliary software. The main functions are the open/close processing of virtual com port assigned PICnome and the mediation of osc protocol between PICnome and Max/MSP(and Processing, PureDate, etc).
Development of code to control the LCD display, keypad , communications and other aspects of the CFA-633 hardware from Crystalfontz. ( Based on PSoC processors from Cypress )
Serial Controlling Interface for Winamp 2.x
This library was designed to send commands and receive analog to digital sensor input from a Pontech SV203 microcontroller board. The library consists of one primary class (SV203) and several support files. This has functions to control all servo funct
PySide QtSerialPort Binding Shiboken LGPL3 QtSerialPort is officially part of Qt (http://www.qt.io). info link: http://wiki.qt.io/QtSerialPort
A simple architecture for documenting custom serial port commands in XML and making them accessible in python.
This is a python script for ymodem sender. It can be used to transfer files to any device capable of receiving data using ymodem protocol.
A distributed remote console access tool written in Java.
This software allow download the billing record from any Selta PABX that support Host/Printer protocol. It will be extended to support Alarms and Config records.
Unified desktop and embedded Serial port API
A simple API, written in C, for accessing the Serial ports in a consistent way across Multiple desktop and embedded platforms. This has allowed programs for embedded devices to be mainly developed on the desktop, where test and debug is much easier. It can also be used to write serial port programs that are portable across different desktop platforms.
This .NET Program allows easy communication with serial devices.
This .NET Program allows easy communication with serial devices, using the .NET 4 framework and open source. It provides a half-console easy-to-learn interface, and does not require any major resources at all!
This is a serial-to-ethernet and/or ethernet-to-serial gateway project. Such a software could reveal useful in many cases.
A Perl program to write characters (eg. a lot number) to an alphanumeric display via rs232. Includes Java Swing GUI. Developed for production in pharma industry. Currently two lines included. German version.
Simple Serial COM read/write program. I needed it for Caller ID read modem driver so it has command auto complete for AT commands. It is a good replacement for HyperTerminal. Made for .NET Framework 2.0
Serial port communication. An usable sample. * support remote control mode (with two fish encryption)
This application is a ASCII-based data scope.
This application is a ASCII-based data scope. When used with a 'spy' cable such as the CBL-Full-1A product from www.commfront.com this progrmam shows the ASCII chars on both sides of a comm link. There are three main tabs on the user interface. The 'Vertical' tab displays the comm link conversation in a vertically-scrolling half-duplex mode. Each 'side' of the conversation is detected by the user-configured 'start msg' and 'end msg' byte sequence. The 'Horizontal' tab shows bytes, one at a time, as they are received on each side of the link so the relative timing relationships can be monitored. Printable ASCII chars are shown. Non-printable are shown with a '0x' prefix. The two sides of this link referred to as 'Port 1' and 'Port 2'. Each side must communicate at the same baud rate. Each side can have its' own start message and end message character configurations. A log tab where state and error messages can be reviewed.
Simple serial port terminal with packet delimiter time detection
A small, simple terminal program capable of detecting packet delimiting silent period. This is just something for refresh on Win32 programming for me, and will be part of a bigger project in the future.
SharpTerm is a terminal application that allows you to communicate with your GSM module. SharpTerm written in Visual C# and It's a similar program to RSTerm.
A dialect-neutral Smalltalk library which supports communication with NMEA enabled devices, such as GPS receivers. The initial specific target device will be a Magellan GPS315 receiver.
SMSSolution. SMS based Reminder system.
SoftDash PC allows realtime control of the Connect2Car MFC controller unit installed in a vehicle. Softdash PC can communicate with the MFC hardware either via a serial connection or a Bluetooth Connection. This project allows for open ended expansion.
HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.
TJTerm is an open source serial port terminal program written in Java, running on Linux, Mac OS and Windows. It supports color, logging, macros, graphical hex and/or ASCII input and output and more.
A server application, a TELNET server, which mainly works as an interface for users to connect to the server serial port or another TELNET server. Any new ideas may be added in along the implementation.