Search Results for "information technology"

LCXterm is a ncurses-based terminal emulator that brings additional conveniences to the raw Linux console and other terminals. LCXterm can: enable GPM mouse to work through a network connection; speed up the console significantly; provide a long and persistent scrollback; transfer files via Xmodem, Ymodem, Zmodem, and Kermit; provide user-defined function key macros; and many more.

Qodem is a a terminal emulator that resembles the BBS-era Qmodem. Includes phonebook, scrollback, capture, X/Y/Zmodem, Kermit, ANSI (+ music) / Avatar / VT102 / Linux emulation, Unicode, and keyboard macros. Connects over serial, ssh, telnet, rlogin.

lterm is a vte-based terminal emulator for GNU/Linux systems. It is mainly used as SSH/Telnet client but can be very easily configured to use any other protocol. Furthermore it can be a usual terminal on local host. Includes some features in order to ease user's work, avoid repetitive tasks and improve speed in operations, see a list below.

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.

Remote Connection Manager is a GTK application that provides an easy way to initiate connections to remote machines. It's primary goal is to provide a GUI to launch ssh, telnet and rdesktop type of applications, however it is highly configurable.

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

Pure object based operating environment, script language, shell, loads plugins to extend functionality, it's a MUD gone awry.

from http://www.anime.net/freevt3k/ - freevt3k is a free NS/VT terminal emulator which can establish term session to the HP3000. xhpterm is an x11 blockmode version of freevt3k with extensive HP terminal emulation.

DIET-PC (DIskless Embedded Technology Personal Computer) is a software kitset enabling IT professionals to build an open source GUI appliance based on commodity x86 (PC), PowerPC (Mac) or ARM (handheld) hardware, using an embedded Linux methodology.

metashell is a lightweight, heavy punch, interactive, intelligent command-line shell. The amazing difference with metashell lies in its ability to determine a file's datatype, and automatically run your desired applications.

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

A console based ncurses system monitoring application that provides a visually appealing overview of system utilization in real-time. It uses the libstatgrab library, and it was inspired by other monitoring tools such as wavemon, statgrab, and gkrellm.

gives remote control of a PC running MS-DOS (which e.g. does not have a monitor display attached to it). The screen image (currently text mode only) is taken from the graphics card and transferred to other computer via serial link and displayed there

SCADA(Supervisory Control and Data Acquisition)system based on Scilab,include Serial,OPC,Modbus,Mysql,TCP/IP interface, and PID simulation, FUZZY control and ect...

basE91 is an advanced method for encoding binary data as ASCII characters. It is similar to UUencode or base64, but is more efficient. The overhead produced by basE91 depends on the input data. It amounts at most to 23% and can range down to 14%.

RTelnet is a reverse Telnet, it's increadably useful to get behind firewalls and NAT's or routers running ip masqurading. very useful for remotely admin someones PC remotely when they don't know how to do anything like opening their firewall.

Gapito, Gnome Parallel Terminal, allows to run several SSH or telnet sessions in parallel, replicating user input over all of them. It is very useful to administrate clusters of machines.

Common Hardware Recovery Solutions by Ukrainian-Russian network

CitrixTS4Linux is a GUI remote access server application written in C and C++ to allow access to RPM-based Linux terminal servers via the free Citrix ICA client.

tt-color is a color terminal emulator for Xwindows and Windows/Cygwin with scripting support for menus. Based on Tcl/Tk, runs with native interface on each system.

pr3287w is a IBM 3287 printer emulation for MS-Windows 95/98/Me/2000/XP/2003 based in open source code pr3287 avaliable at http://x3270.bgp.nu/download.html. It was totally rewrited in C++ and added a new interface.

A terminal program for the GGI graphics system

PocketPuTTY is a Pocket PC port of famous PuTTY (SSH client). Smartphone support is also planned. The long-term goal is to get PocketPuTTY included into official PuTTY development tree.

tcp2com creates a bridge between a TCP socket and a serial port (COM). The program runs as a service under Windows NT. With tcp2com, you can telnet into any device you may have plugged into your COM port.