Search Results for "write serial"

The cross-platform VT100 terminal emulator for serial ports and TCP / UDP connections has a simple, uncluttered interface that can be extended with JavaScript.

ModbusBB is a professional Modbus Master/Client application for Windows, designed for engineers who need to test, debug, and monitor Modbus slave devices quickly and reliably. Supports both Modbus TCP/IP and Modbus RTU serial protocols with full configuration options for any industrial device. All standard function codes FC01 through FC16 are supported including Read Coils, Read Discrete Inputs, Read Holding Registers, Read Input Registers, Write Single Coil, Write Single Register, and Write Multiple Registers. Key features: - Auto-polling with configurable intervals from 100ms to 10 seconds - Complete communication log with request/response details and CSV export - Device scanner to discover slave IDs and valid register ranges - Watchdog alerts when values change or exceed thresholds - Connection profiles to save and switch between device configurations - Data logging to CSV with timestamps for trend analysis in Excel - Modern GUI and command-line (CLI) interface for auto

v21.06.018 Complete implementation of DNP3 protocol standard including File transfer. Binary Input, Double-bit Binary Input, Binary Output, Counter Input, Analog Input, Analog output, Octect String, virtual terminal String. support CROB, analog output command with "select-before-operate" or "direct-execute" command execution modes Industry proven, tested with all leading test tools Get a free DNP3 (IEEE 1815) Development Bundle In the Development Bundle, We included DNP3...

DNP3 Protocol - v21.06.018 Complete implementation of DNP3 protocol standard including File transfer. Binary Input, Double-bit Binary Input, Binary Output, Counter Input, Analog Input, Analog output, Octect String, virtual terminal String. support CROB, analog output command with "select-before-operate" or "direct-execute" command execution modes Industry proven, tested with all leading test tools. DNP3 Protocol RTU Outstation Server Simulator, Client Master Simulator,...

INFORMATION This program can be used for the following: - To collecting Cisco device information like: hostname, serial, model, IOS image, version, uptime, free memory (to CSV) - To enable the SCP service on the device (automaticly before file transfers) - To make a backup of the running-config and startup-config with SCP (with built-in MD5 hash comparison check) no TFTP/SFTP server needed. - To save the running-config to the startup-config (write memory) - To transfer a new image to the device with SCP (with built-in MD5 hash comparison check) - To change the boot target to the new image (boot system flash:/) It has got the following features: - Error handling - information and error logging to log file (Log will be appended) - information and error logging to CSV file (Log will be overwritten each run) - Transfers retry 3 times - MD5 checks after file transfers to be sure the file is transferred without problems

This software is used to extract operational data from the EPEVER Triron solar-PV controller, including its PV power output, battery voltage, load current, device temperatute, etc. Data collection is done in two halves: a client ("solatonclient") that talks to the controller via a serial port and RS-485 adapter, and a server ("solatonserver") that stores the information in files. The "solatonclient" sends information to the "solatonserver" over the network, and because it does not need to write to the file-system itself it can be run on a small computer such as a Raspberry Pi.

An Open Community in the Home Automation and Domotics space. We believe an Open Source approach can revolutionize the way people create, install, and maintain software in the industry. Our panel technology integrates with your favorite protocol and runtime hardware through Open Source software. We open up the front-end and support a unified panel and visual programming model. An installer can pick and choose hardware products from different vendors and still present one panel UI to the...

Java library to send and receive data via Serial COM-Ports. This library is intended to provide an easy way to access the serial-port. Only a few lines of code are needed to Read or Write data via serial port. All Properties and Methods are inspired by the "SerialPort"-Class of the .NET Framework (System.IO.Ports.SerialPort) The benefit of this project is, that it needs only a few lines of code to implement, and a reduced CPU load.

A simple API, written in C, for accessing the Serial ports in a consistent way across Multiple desktop and embedded platforms. This has allowed programs for embedded devices to be mainly developed on the desktop, where test and debug is much easier. It can also be used to write serial port programs that are portable across different desktop platforms.

This project can read and write x10 signals to the serial port to control lights, sounds, phone and media player

A Perl script that interfaces with the Devantech USB to I2C interface adapter. This script allows a user to read and write as a master to the i2c bus as well as set or get the value of the io pins.