Search Results for "solar"

The primary goal of the Network UPS Tools (NUT) project is to provide support for Power Devices, such as Uninterruptible Power Supplies, Power Distribution Units, Automatic Transfer Switches, Power Supply Units and Solar Controllers. NUT provides a common protocol and set of tools to monitor and manage such devices, and to consistently name equivalent features and data points, across a vast range of vendor-specific protocols and connection media types. Network UPS Tools (NUT) is an open-source solution for monitoring and managing uninterruptible power supplies (UPS) and other power devices across networks.

Ufficio Zero Linux OS is a desktop operating system offered in many versions based on PCLinuxOS, Linux Mint and Devuan. We also have created Duplica, a Bare Metal Restore Solution. This distro has many packages for professional use. The project is managed by the Italian company SIITE SRLS and promoted by the Italian Association Boost Media APS. Ufficio Zero Linux OS is trademarked through the Linux Mark Institute. All rights reserved. Linux® is the registered trademark of Linus...

...This project is intended to be a teaching and learning experience for those who want to get involved in mechanical engineering, software, electronics, or robotics. JPL is always looking to inspire the next generation of scientists, engineers, and roboticists to help us explore and learn about our solar system (and beyond!). We release the plans for this rover as a way to try and give budding enthusiasts a fun robotics project that will help teach them and get them involved in robotics sooner and at a lower cost. The specific attributes of the robot you build will depend slightly on the type of electronics and motors you buy for the system.

This software is used to extract operational data from the EPEVER Triron solar-PV controller, including its PV power output, battery voltage, load current, device temperatute, etc. Data collection is done in two halves: a client ("solatonclient") that talks to the controller via a serial port and RS-485 adapter, and a server ("solatonserver") that stores the information in files. The "solatonclient" sends information to the "solatonserver" over the network, and because it does not need to write to the file-system itself it can be run on a small computer such as a Raspberry Pi.

The Okapi Viewer app is intended for use by owners of Okapi solar air heater fan control systems. It is used to monitor data (inlet, outlet, ambient temperatures and fan speeds) broadcast by the Okapi systems that use the optional Bluetooth transceiver module. The app can also be connected to "hacked" Okapi systems by wiring a PL2303 USB adapter (or similar) to the "hacked" Okapi.

PVCCUPLOAD is a suite of programs that collect solar and consumption power data and then send this data to PVOUTPUT.ORG. The suite currently supports SMA inverters and Current Cost meters. It was primarily designed to work with United States based inverter configurations using the U.S. NEC (section 690) electrical code requirements for back feed breakers with Current Cost meter configurations.

An open source approach to display Solar date in MS-Windows XP.his tool will changes standard TimeStamp of windows to a solar date. After install, solar date string embed to every windows date peresentation that uses LongTimeFormat.