Search Results for "uart"
Sort By:
Showing 23 open source projects for "uart"
View related business solutions-
SIEM | API Security | Log Management SoftwareBuilt on the Graylog Platform, Graylog Security is the industry’s best-of-breed threat detection, investigation, and response (TDIR) solution. It simplifies analysts’ day-to-day cybersecurity activities with an unmatched workflow and user experience while simultaneously providing short- and long-term budget flexibility in the form of low total cost of ownership (TCO) that CISOs covet. With Graylog Security, security analysts can:
-
The Original Buy Center Software.VAN sources private-party vehicles from over 20 platforms and provides all necessary tools to communicate with sellers and manage opportunities. Franchise and Independent dealers can boost their buy center strategies with our advanced tools and an experienced Acquisition Coaching™ team dedicated to your success.
-
1
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
2
EdSim51
The 8051 Simulator for Students and Educators
EdSim51, developed by James Rogers, is unlike an industry-standard simulator – this simulator has the student in mind. A virtual 8051 is interfaced with virtual peripherals such as a keypad, motor, display, UART, etc. The student can write 8051 assembly code, step through the code and observe the effects each line has on the internal memory and the external peripherals. Code written in C can also be imported into the simulator. Find out more, including the installation instructions and the user's guide at edsim51.com. You're obviously into technology. ... -
3
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
4
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository.
-
Say goodbye to broken revenue funnels and poor customer experiencesLeanData is a Demand Management solution that supports all go-to-market strategies such as account-based sales development, geo-based territories, and more. LeanData features a visual, intuitive workflow native to Salesforce that enables users to view their entire lead flow in one interface. LeanData allows users to access the drag-and-drop feature to route their leads. LeanData also features an algorithms match that uses multiple fields in Salesforce.
-
5
eCxx
A C++ library for AVR and NodeMCU
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original... -
6
asioemu
Atari 8-bit disk emulator
The program has been written in order to copy Atari 8-bit disks to ATR images on a PC. For this purpose the software emulates the behavior of an Atari SIO disk drive. -
7
x-hyp free
X-hyp free Hypervisor
X-hyp free is a Open Source hypervisor based on a micro-kernel architecture with para-virtualisation. X-hyp is distributed under a GPLv2. X-hyp already has support ARM-9 Cortex-M3 and Cortex-A8 processor, has drivers for PL1x UART and is ready to use inside of QEMU versatile and realview and on a iMX25 development board. X-Hyp has support for several scheduler, POSIX FIFO, POSIX RR and Sporadic and it support GPOS or RTOS domains. Next steps are : - to add support for more devices, network, flash. - to port to new processor, Cortex A15, LEON IV - to port new operating Systems -
8
Calimero
A free Java KNX network library
...The minimum JVM requirements are either Java ME/CDC 1.4 (Foundation Profile), or Java SE 8 (profile compact1). The library provides remote access and control, supporting KNXnet/IP, KNX IP, FT1.2, TP-UART, and KNX USB. Data exchange is supported on link layer using EMI 1/2 and cEMI, KNX data point types, application/management layer, as well as message buffering. -
9
RunLengthGPIO
a computer interface to the Arduino I/O digital lines
...In a similar way, the Arduino can be programmed a sequence of output pin changes, each specified by the new values of the output pins and the time since the previous change. Three application programs are included: the first makes two digital pins act as a TTL-levels UART; the seconds turns the value of the input pins into an image; the third reads codes from infrared remotes with a photodiode and a resistor connected to one of the input pins. -
Skillfully - The future of skills based hiringSkillfully transforms hiring through AI-powered skill simulations that show you how candidates actually perform before you hire them. Our platform helps companies cut through AI-generated resumes and rehearsed interviews by validating real capabilities in action. Through dynamic job specific simulations and skill-based assessments, companies like Bloomberg and McKinsey have cut screening time by 50% while dramatically improving hire quality.
-
10
openMAS
Opensource hardware platform for Arduino and Raspberry Pi
openMAS is an open source hardware platform based on DIN41612. Different boards can be used as controllers (Arduino, RaspberryPi, Nucleo, NI-Hardware). The modular construction converts your µ-controller board into an extensible measurement and automation system. For more information: openmas.de The english page is not ready, please use the german version. Have a lot of fun, openMAS-Team -
11
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
-
12
C# source code to get Optris MSPro, MSPlus IR thermometer measures, using the specific Usb/Serial cable (Silicom Lab CP210X USB to UART bridge in fact). For developper only : go to Files menu to get code. Maybe also for LS series. Say me back if it's OK.
-
13
BlackLib
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
14
An RGB camera viewer implemented using SDL, running on the Raspberry Pi. The source is a Toshiba TCM8230MD camera controlled by a Freescale MCF51AC128ACFUE. The data is fed through UART.
-
15
lpcprog
LPC214x FTDI(UART) programmer
-
16
RGBLightControl
LED Color Control System for RaspberryPi and Dreambox
This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball! -
17
AVRILOS
Simple AVR OS
A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details. -
18
Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.
-
19
Free general purpose loader tool for ATMEL's AVR controllers using arduino board or FTDI's FT232. PCB Files also available.
-
20
ACTIface (A Customizable TP-UART Interface) connects a PC to a KNX TP1 (EIB TP) network. It is built around a popular ASIC (the TP-UART) and optionally includes a microcontroller for improving communication with the PC (or standalone operation).
-
21
This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.
-
22
Tiny Shell provides the minimum you need to implement shell facilities into a small system. For instance, add a shell to your embedded platform as soon as you can read/write bytes from the UART.
-
23
This is a driver module for linux written in C language for the 310 apsx rfid reader. This device use the communication via uart (interrupt based) for dialect with a normal pc.
- Previous
- You're on page 1
- Next
