Search Results for "esp"

...The configuration portal is of the captive variety, so on various devices it will present the configuration dialogue as soon as you connect to the created access point. When your ESP starts up, it sets it up in Station mode and tries to connect to a previously saved Access Point. If this is unsuccessful (or no previous network saved) it moves the ESP into Access Point mode and spins up a DNS and WebServer (default ip 192.168.4.1). Using any wifi enabled device with a browser (computer, phone, tablet) connect to the newly created Access Point. ...

...On one side, eCxx supports the original megaAVR series (ATmega328P, ATmega1284P, ATmega2560, ATmega32U4, AT90USB1286, etc.) as well as the new megaAVR 0-Series (ATmega4808, ATmega4809, etc.). On the other side, while eCxx is primarily designed to work in NodeMCU, it should also support other ESP-12 based design as well as ESP-01 based design. The Makefile build system and some of the tools would only run on Linux. However, the library source code should be portable enough to be built using other build systems for AVR and NodeMC

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries with Apple HomeKit! ...

360-FAAR (Firewall Analysis Audit and Repair) is an offline, command line, firewall policy manipulation tool to filter, compare to logs, merge, translate and output firewall commands for new policies, in Checkpoint dbedit, Cisco ASA or ScreenOS commands, and its one file! Read Policy and Logs for: Checkpoint FW1 (in odumper.csv / logexport format), Netscreen ScreenOS (in get config / syslog format), Cisco ASA (show run / syslog format), 360-FAAR compares firewall policies and uses...

...Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine.

...Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: * DS18B20 * DHT11 * DHT22 * BH1750 * BMP085 * Wiegand RFID * PN532 * SI7021 * TSL2516 * HCSR04 * TSOP4838 IR * MCP23017 * PCF8591 * PCA9685 * LCD and OLED displays * BME280 * INA219 * MLX90614 * ADS1115 * MSP5611 * BMP280 * SHT1x The ESP is web configurable for both Wifi setup and device configuration. For support: - have a look at the wiki on www.esp8266.nu - join our forum on www.esp8266.nu/forum

Growlight facilitates management of all storage devices known to the Linux kernel, from hardware RAIDs to hybrid media to ramdisks to ZFS (indeed, Growlight was initially written to simplify ZFS on Linux). It understands the majority of partition and filesystem types, as well as both software and hardware RAID, LVM, and encrypted disks.

This is a utility project to parse log files esp when the log files are huge so you can filter the log file and construct small piece of log file according to your needs (time range + search /exclude keywords).

A modern, portable CGI library written in standard C++. Asynchronous CGI and FastCGI are both supported in a clear, simple and efficient library built upon the Boost C++ libraries (esp. Boost.Asio). Free and commercial support available on request.

The Ape Base Compile System is a set of bash scripts to leverage both ESP EPM (http://www.epmhome.org/) and MREPO (http://dag.wieers.com/home-made/mrepo/) in maintaining applications such as as Apache HTTPD, MySQL or PHP on Red Hat based systems.

RIZAP (Realtime Internet ZAP) is a graphic program that shows realtime traffic on a network. Each packet is shown as a "zap", a line between nodes located in the local and remote networks. It is useful for telling network health at a glance (esp. WAN).

LANtern is a packet analyzer for Linux. It's written in C (without pcap) and released under the MIT license. It supports ARP, RARP, MPLS, IPv4 (AH, ESP, GRE, ICMP, IGMP, IPComp, TCP, UDP, UDP-Lite, and IP-in-IP encapsulation), and more.

An TCP/IP client-server event signalling protocol. Allows near instant delivery of events to interested clients by means of event subscriptions. The protocol is generic and not intended for any specific application.

DVD/CD UDF disc drive tools, esp. for the Iomega RRD (aka Iomega REV) drive. Usability patches for UDF mkfs and fsck. Commentary for the lk MMC and UDF source code. cvs co tarballs for firewalls that defeat CVS. Links, FAQ's, troubleshooting hints.

Daemon4J is a helpful ghost for those who - dont like Java startup speed, esp. when the actual program needs only a second - dont know the classpath to use - want to hide Java behind an innocent command line tool - are not ready for the Big Serve

CGIgen is a collection of classes that are useful in data-encapsulation esp. for CGI-scripts. It also includes other classes that may be helpful in writing CGI-scripts.

A Collection of utilities, daemons, scripts, web pages that makes life a lot easier for system administrators (esp. those who work for/in an Internet Service Provider(s)).