Search Results for "arduino project"
Sort By:
Showing 28 open source projects for "arduino project"
View related business solutions-
SKUDONET ADC, operates at the application layer, efficiently distributing network load and application load across multiple servers. This not only enhances the performance of your application but also ensures that your web servers can handle more traffic seamlessly.
-
From improving customer experience through seamless sign-on to making MFA as easy as a click of a button – your login box must find the right balance between user convenience, privacy and security.
-
1
Arduino IDE
Arduino IDE library
This repository contains the source code of the Arduino IDE 2.x, which is currently in the beta stage. The Arduino IDE 2.x is a major rewrite, sharing no code with the IDE 1.x. It is based on the Theia IDE framework and built with Electron. The backend operations such as compilation and uploading are offloaded to an arduino-cli instance running in daemon mode. This new IDE was developed with the goal of preserving the same interface and user experience of the previous major version in order... -
2
Arduino core for the ESP32
Arduino core for the ESP32
.... The low-duty cycle is used to minimize the amount of energy that the chip expends. The output of the power amplifier is also adjustable, thus contributing to an optimal trade-off between communication range, data rate and power consumption. The ESP32 series is available as a chip or module. You can use Arduino-ESP32 Online Documentation to get all information about this project. -
3
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 282,500+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects... -
4
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
ConnectWise PSA (formerly Manage) allows you to stop working in separate systems, and helps you build a more profitable business. No more duplicate data entries, inefficient employees, manual invoices, and the inability to accurately track client service issues. Get a behind the scenes look into the award-winning PSA that automates processes for each area of business: sales, help desk, support, finance, and HR.
-
5
Blynk C++ Library
Blynk library for embedded hardware
Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG... -
6
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards. Reads... -
7
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older myDCP2 (two... -
8
ASCOM DarkLight Cover/Calibrator
DIY project to build an ASCOM compliant flip/flat panel
The DarkLight Cover/Calibrator, known going forward as DLC, is a Do-It-Yourself (DIY) solution using an Arduino Nano, servo motor, and if desired, an Electroluminescent (EL) Panel. This device, also known as a flip/flat panel, aims to act as a dust cover for remote telescope users, and a calibration panel if desired. With the DarkLight, fully compliant, ASCOM driver, the cover can be operated using the DLC Windows application or any automation software supporting the ICoverCalibrator driver... -
9
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries... -
The only software you need to increase cash flow, optimize resource utilization, and take control of your assets and inventory.
-
10
KleOS
KleOS brings together Arduino, FreeRTOS and Arduino-mk to you.
KleOS 1.1.0: Fixed some warnings. KleOS 1.1: Offers support for the Arduino Due boards. KleOS 1.1_Due: It's the actual support for Arduino Due boards. --- KleOS project is here to help you create real time applications for the Arduino platform. * Arduino. Your preferred electronics platform. * FreeRTOS. The real time operating system for embedded systems. * Arduino-mk. The tool to compile your Arduino projects from the command line. Arduino is the opposite to real time; however, so many real... -
11
deej
Set app volumes with real sliders! Arduino project to build hardware
... are connected to 5 (or as many as you like) analog pins on an Arduino Nano/Uno board. They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file. -
12
stm32f7nucleo-eastrising-7inch-lcd-spi
STM32 Nucleo STM32F746ZG interface to East Rising 7 inch LCD Panel
An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along... -
13
RetroPC-SIM
RetroPC-SIM is an Arduino project to help to understand how pc works
RetroPC-SIM is an opensource project, to help to understand how pc works, manage memory and registries, how it represent the numbers and negative numbers, saving results, activating flags, and all it interacting with the simulator only with binary input, also you can connect a perdorated cards reader to input the instructions code from it. -
14
OBD-II for Arduino
Providing easy OBD-II connectivity for open-source hardware
This OBD library for Arduino is developed for the OBD-II Adapter for Arduino. Several example sketches are provided for demonstrating the usage of the library as well as for real data logging use. The aim of the project is to provide Arduino vehicle connectivity via the OBD-II port with easy-to-use Arduino library so Arduino lovers can start play Arduino on their cars easily. Source code repository: https://github.com/stanleyhuangyc/ArduinoOBD -
15
DMX Library for Arduino
DMX Library and usage examples for Arduino
This Library includes a DMX Master, DMX Slave and various examples on how to use its implementation. This projects has been started to support the use of our Shielded DMX / RDM Shield for Arduino. The library is made available under the GNU Lesser General Public License If you would like to make contributions to the source code feel free to contact the project admin -
16
Cortex GNAT Run Time Systems
Supports writing Ada software for Cortex-M3, M4F boards
DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only... -
17
Easy CNC
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters. -
18
Sunwait
Sunrise/sunset utility for Windows Task Scheduler or cron.
... dusk range is 3:30pm to 10:30pm here, so it reasonable to schedule a dusk task at 3pm and allow Sunwait to pause the task for between 30mins and 7 and a half hours. If you scheduled the task for 6pm, then your lights will come on no earlier than 6pm. The sun's position is calculated using time, and position - latitude and longitude should be specified on the command line. This project is a fork from the work by Dan Risacher. The code also runs on Linux: download all files and run 'make' -
19
eChanter is an Open Source electronic bagpipe project, based on the Arduino platform, using capacitive touch sensors, with polyphonic wavetable synthesis PCM audio at 8KHz. See Files for the development version, eChanter v3.0.
-
20
Hydroponic Automation Platform (HAPI)
Technologies for automating food production on various scales
The Hydroponic Automation Platform Initiative (HAPI) develops and provides hardware and software components for automating food production using hydroponic, aquaponics, and precision agriculture techniques. High-yield production in urban settings is one of the primary goals. Artifacts include hardware design (mainly Arduino-based), firmware, management software and reporting modules. -
21
PROS
Custom firmware and IDE for the VEX Cortex Microcontroller
This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major computing... -
22
AquaPiPi
Fresh water reef thank controller.
WARNING: DRAFT VERSION FOR HARDWARE TEST PURPOSE! The intend of this project is mainly to control a 5 channel LED light and to remotely monitor the LED heatsink and water temperature. The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running: -16x2LCD... -
23
ArduEMS-328
Arduino Engine Management System
This project is based on the original open source MegasquirtAVR, which became the closed source commercial product known as VEMS. There is a full copy of the original website in the Downloads section. It has the same features as Megasquirt 1 and can be tuned in MegaTunix, MegaTune or TunerStudio as a Megasquirt 1 B&G2.0-3.0. The code is compiled for the ATmega328p so the supported boards should be: - Arduino Uno - Arduino Duemilanove - Arduino Diecimila - Arduino NG - Arduino Extreme v2... -
24
ArduinoPERL
Linux version of arduinophp
CONTROL ARDUINO WITH PERL * PROJECT DISCONTINUED * -
25
ArduSim
To be a practical Arduino simulator
ArduSim provides API level simulation of an Arduino. Arduino sketches can be run and debugged on PC with no modification. ArduGate is a sub-project of ArduSim. The agent sketch is shared.