Search Results for "analog clock c code"
Sort By:
Showing 12 open source projects for "analog clock c code"
View related business solutions-
HubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
From improving customer experience through seamless sign-on to making MFA as easy as a click of a button – your login box must find the right balance between user convenience, privacy and security.
-
1
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
..., install libraries 561, 562, and 563 with "platformio lib install", adapt the WeatherStationDemo.ino file to your needs. The simple class uses the header date and time to set the clock. NTP-based time class written by Fabrice Weinberg. We fixed many bugs and improved performance and changed the API a little bit. Either compare your code to the updated WeatherStationDemo or read through the upgrade guide. -
2
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards. Reads... -
3
pipZuseZ3
An emulator for the Zuse Z3 computer, invented in 1941
An emulator for the Zuse Z3 computer, invented in 1941 by Konrad Zuse. It was the world's first working programmable, fully automatic digital computer. The Z3 was built with 2,600 relays, implementing a 22-bit word length that operated at a clock frequency of about 5–10 Hz. Program code was stored on punched film. Initial values were entered manually. -
4
eCxx
A C++ library for AVR and NodeMCU
... series (ATmega328P, ATmega1284P, ATmega2560, ATmega32U4, AT90USB1286, etc.) as well as the new megaAVR 0-Series (ATmega4808, ATmega4809, etc.). On the other side, while eCxx is primarily designed to work in NodeMCU, it should also support other ESP-12 based design as well as ESP-01 based design. The Makefile build system and some of the tools would only run on Linux. However, the library source code should be portable enough to be built using other build systems for AVR and NodeMC -
Built for growing businesses and well-established enterprises alike, Multiview is a highly scalable and robust ERP.
-
5
deej
Set app volumes with real sliders! Arduino project to build hardware
... are connected to 5 (or as many as you like) analog pins on an Arduino Nano/Uno board. They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file. -
6
FastFlow: programming multi-core
Pattern-based multi/many-core parallel programming framework
FastFlow is a C/C++ programming framework supporting the development of pattern-based parallel programs on multi/many-core, GPUs and distributed platforms. FastFlow run-time is built upon non-blocking threads and lock-free queues. Thanks to its very efficient CAS-free communication/synchronization support (e.g. few clock cycles core-to-core latency), FastFlow effectively supports the exploitation of fine grain parallelism, e.g. parallel codes managing very high frequency streams on commodity... -
7
can4linux
CAN bus device driver
can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO -
8
BioGB
Highly portable Gameboy Color emulator
BioGB was designed with the following properties: 1. It most be as portable as posible. 2. The code most be easy to read. -
9
AquaPiPi
Fresh water reef thank controller.
... display and menu to manage clock, cloud and lightning setup. -3,2" TFT diplaying temperature, led power, led status (cloud, sunrise, sunset...), clock, time of next cloud. -Local web server is running but webpage need to be finished -Web COSM client. Online temperature logging -Virtual RTC In development: -Addition of the last DS18B20 -Rebuild TFT touchscreen menu -Reorganization and clarification of the code -Implement DS1307 (actual chip is down, waiting for a new one...) -
Paligo is an end-to-end Component Content Management System (CCMS) solution for technical documentation, policies and procedures, knowledge management, and more.
-
10
Ships Clock will ring a bell on every half-hour in the style of the standard ship's clock used for centuries on sailing ships around the world and still used in the world's navies today.
-
11
Hardware description and software for the Bob-clock, a digital implementation of an analog clock using 60 bi-color LEDs for displaying the time. The hardware is based on an Atmel AVR ATmega324.
-
12
PLCduino
Open Source PLC based on the arduino platform
PLCduino is an open hardware alternative for industrial and home automation. It uses the well known ATmega chips as main processor, the same used on Arduino. This means that PLCduino is code-compatible with all arduino sketches.
- Previous
- You're on page 1
- Next