Search Results for "router"

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it;...

A secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways; its primarily used as a Internet gateway, router, firewall, and wireless access point. LEAF documentation wiki http://bering-uclibc.zetam.org

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

Tomato USB is a fork of popular Tomato firmware (http://www.polarcloud.com/tomato) for Broadcom-based routers. This fork adds built-in support for USB port, wireless-N mode support, support for several newer router models, and various enhancements.

The WRT54GL Tarifa enhanced firmware. Linksys WRT54G/WRT54GS models V1 to V4 and the WRT54GL V1.x This Third Party Firmware is functionaly the same as the original, the improvements are to make this router more scaleable, by increasing the capacity.

A WebUI for the OpenWRT router firmware. Its main goals are: - ease of use - quick feedback to the user (rather than "post and wait until the browser times out") - providing configuration options for as many aspects of the firmware as possible

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

Open Linux Router is a toolkit to centralize computer networking and Internet services within an organization. Its goal is to provide secure, alternative, open source solutions to the seemingly standard, but competitive and commercialized IT market.

Q5 is a complete fully open linux based router / network appliance, including hardware. It supports up to four wireless minipci cards and two 10/100 Mbps NICs. The hardware is build around AMD's AU1500 MIPS processor, running at 264 MHz.

flixx is a modification of the router system fli4l. The difference is the support of C++ while staying as compatible as possible to the original system. The project provides the router system itself and a build environment to create custom binaries.

SIPatHome was based on the SIP Express Router (SER) which is a well-tested, configurable, free and RFC3261-compliant SIP proxy. The project was providing VoIP server software for the embedded Linux distribution OpenWRT on affordable Linksys WRT hardware.

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.