Search Results for "solar"

The primary goal of the Network UPS Tools (NUT) project is to provide support for Power Devices, such as Uninterruptible Power Supplies, Power Distribution Units, Automatic Transfer Switches, Power Supply Units and Solar Controllers. NUT provides a common protocol and set of tools to monitor and manage such devices, and to consistently name equivalent features and data points, across a vast range of vendor-specific protocols and connection media types. Network UPS Tools (NUT) is an open-source solution for monitoring and managing uninterruptible power supplies (UPS) and other power devices across networks.

The IoT Leaf is a small ESP32-based device which can be used as highly flexible power supply, as embedded controller or as a combination of both: it consists of a board which can be cut into two pieces resulting in two different devices or which can be used as one. The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module. Both together provide a powerful hardware which can be used in many different scenarios. Details and the full specification are available at https://iot.halaser.de This repository contains different firmware-examples and applications which can be used together with this board as well as hardware designs which are free to be used.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. ...

Sisolo is a simple solar logger, meant to run on small embedded devices, like routers. Currently it targets OpenWrt, uses Yasdi to interface with SMA inverters and Curl to store logs on an ftp server.

Software monitors a Xantrex GT series solar inverter, stores it in a database and periodically updates a web page with current status. The inverter is monitored via a serial port.

Software and electronics hardware for concentrated solar power. A mix of code, electronics and sensor designs for tracking the sun to harvest solar power and related tasks.

Belenos is an automated sun reflector for solar concentration. It is a system based on a Raspberry Pi board (ARM Linux board). Two motors allows to pilot the reflector orientation to follow the sun along the day. This system can receive tele-command and send tele-metry on TCP\IP network.