Search Results for "freescale"

Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.

Armadeus is an OpenSource Hardware and Software project based on an ARM core (Freescale i.MX) and Linux. You can consult our wiki at http://www.armadeus.org to join our non profit association or our commercial website at http://www.armadeus.com .

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

...The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO board. More to come....

For Freescale HAL development before it is accepted into the eCos CVS. Mainly Kinetis and iMX6 SMP work.

Sample code for hx8347-A and SSD1289 for 8bits MCU ( begin with Freescale MCU 9s08aw60 with codewarrior V10.x and now Coldfire V1) , print text , draw line , box , circle, scrolling, get coordinates of touchpanel , read BMP file and FATlite drivers from Freescale revised ( FAT16 ). Tested on 9s08aw60 demoboard : http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=DEMO9S08AW60E&fr=g New release with Coldfire V1 Flexis MCF51AC256A (32bits) pins to pins compatible with 9s08aw60

Mini Vezer OS (MVOS) is a minimal footprint simple embedded OS-like task scheduler implementing cross-task communication, primarily designed for the Freescale HCS08 microcontroller.

A free Modbus RTU/ASCII implementation for embedded systems. It is designed to be portable and ports are available for ARM STR71x, ATMega168, Freescale/Motorola Coldfire MCF5235, TI-MSP430, LPC214X, Z8Encore, Win32 and Linux.

USB-IR-Boy is an LIRC compatible home brew USB Infrared (IR) receiver based on the Motorola (Freescale) MC68HC908 microcontroller. The project includes electronic schematics, MCU code, and a lircd compatible kernel module.

rtmc9s12-Target is a MATLAB/Simulink block-set for real-time control on Freescale MC9S12 microcontrollers.

OB2CANob is the software side of an OBD2 capable scantool with CAN on board. The software is a small operating system for Freescale 9S12X processors, that can of course be used for other handheld projects using a graphical LCD, keypad and SD-card.

Weeno is an software-only extension of Wiring / Arduino for potentially all and any Atmel AVR MCUs. And potentially all chip architectures from all companies, whether Freescale, SiLabs, TI, even ARM. Basically, the goal is to make AVR-Weeno, ARM-Weeno, 8

C-Control II (Conrad Electronic)-kompatible Virtuelle Maschine fuer die Freescale CPU12-Familie.

K-OS is an open-source realtime-operating-system based on the OSEK/VDX standard aimed at compiler and microcontroller independence. Currently we support Motorola (Freescale) HC12/HCS12/HCS12X targets.

The COGlinux port for the Virtual Cogs stackable SBCs based on the Freescale i.MX21 ARM9 multimedia processor.