Search Results for "can bus"

The Transparent Inter Process Communication service can best be described as a cluster wide equivalent to the Unix Domain Socket IPC, but with much more features. Go to http://www.tipc.io for more details.

MultiCAN implements a CAN Bus device support for EPICS. EPICS is a framework for control systems, the CAN Bus is a reliable real-time field bus. The ‘Multi’ und MultiCAN stands for ‘Multi Protocol support’, so it supports more than one protocol for CAN Bus communication. MultiCAN has support for the CANOpen protocol and the older CAN Application Layer (CAL).

The loadavgd program monitors the CPU load and user input at (pseudo-) terminals. It provides a kind of power management for server systems, where keyboard or mouse activity can not be queried. Loadavgd was written because powernap did not work on my system. If the load is below a certain treshold and there is no input at any (pseudo-) terminal for a given amount of time, an action is issued. This action might be, for instance, "suspend". The D-Bus API of systemd-logind is called...

Dieses Projekt beinhaltet eine Digitalsteuerung auf Basis des CAN-Bus, Eclipse RCP und AVR-Mikrocontrollern.

Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use...

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non...

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)

This device driver implements KMDF based virtual bus driver and generic virtual disk hosted on it. Users can add virtual disks to Windows OS which are then seen and managed by OS as generic, regular disks. Virtual disks are plug in/out with cmdln utility

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

CAN Remote Automation and Control with the AVR Set of tool for Web based Home Automation over the CAN-Bus including firmware and PCB.

The C-Bus Module is used to provide a C-code API between a Clipsal C-Bus PCI interface, and an application program. Application programs can be on small embedded micros with no OS and only a few K of RAM, thru to Windows & Linux.

Piggyback fuel injection controller for gasoline engines.

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

IBusBox is a open Source BMW/Rover/Mini I/K-bus real time network stack written in ANSI C targeting mainly 8 bit microcontrollers. It has been developed on the AVR ATA6613. You can use this stack for your own IBus extensions e.g. a mp3-Player.

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

It is a powerfull CAN (Controller Area Network) Trace Programm. With this Programm you can Trace the CAN-Telegrams(Frames) and send Telegrams on the CAN-Bus.

USBView is a GTK program that displays the topography of the devices that are plugged into the USB bus on a Linux machine. It also displays information on each of the devices. This can be useful to determine if a device is working properly or not.

Data visualisation for 1-wire bus. Currently only temperature sensors are supported. Program can show configurable plots for any temp sensor and/or alphanumeric displays showing current temperature. The idea is based on Windows program Lampomittari.