Search Results for "access point"

A secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways; its primarily used as a Internet gateway, router, firewall, and wireless access point. LEAF documentation wiki http://bering-uclibc.zetam.org

An Electronic Shelf Label is a device that's typically attached to the front edge of retail shelving. ESL Firebase Edition V2.0 utilizes the AES-256 in CBC mode and Google Firebase. It doesn't require an expensive gateway to function, once configured, all it needs is a power supply and a Wi-Fi access point. ESL Firebase Edition V2.0 allows you to operate as many of them as you wish, provided that each has its own unique ID, and there's enough power and bandwidth for all of them...

... remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine.

PepperSpot is a captive portal or wireless LAN access point controller which support the IPv6 protocol. It supports web based login and it supports Wireless Protected Access (WPA). Authentication is handled by your favorite radius server (over IPv4/IPv6)

This system restricts the network users and records usage log of the users. It is applicable to the campus wide network and is compatible to almost all network terminals. MAIN DEVELOPMENT SITE IS MOVED FROM here TO "https://osdn.jp/projects/opengatem/"

A user read-only access account. Note: As the filesystem is read only, some commands won't work, such as vi that requires write access into /var/tmp to create a temporary file. To setup read-only access a "new root" directory such are "/var/read-only" is created,.Under this directory "/" is mounted as read-only. Here is a diagram of the directory structure. / | | | | var usr adm <etc> | read-only | / (Note: this link is a read-only mount...

A linux liveCD for the non-invasive, non-destructive detection and analysis of WiFi (802.11) networks. It also provides mechanisms to set up a PC as an 802.11 Access Point.

Firmware for the Minitar 802.11g Wireless Access Point - MWGAP. This devices runs on the Linux Operating System and this repository will manage the source code for the firmware that runs the device.

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

The SWAP (Secure Wireless Access Point) project is intended for use in embedded appliances. These appliances will operate in the role of a WEP (wireless encryption protocol) and IPSEC enabled wireless access point, IPSEC VPN gateway, and firewall.

This project tries to explain the construction of a open wireless access point using Linux. Use your old PC to build your own Wireless Access Point.

This project is recreating the functionality of the Linksys WAP11 802.11 Access Point manager software in GNOME using net-snmp and GNOME. This access manager will provide most of the management functionality of the Windows client.

OWLOS Open source network operating system for managing IoT devices: - does't require internet access or additional servers - ready to connect sensors, actuators, LCD, DHT, Stepper and other devices - does't require programming skills - built-in user interface - use web browser to access and manage your OWLOS nodes - built-in RESTful server - built-in MQTT client - at the same time WiFi access point and station, in any combination: - can be used autonomously...