Search Results for "system monitor"
Sort By:
Showing 161 open source projects for "system monitor"
View related business solutions-
Stop vibe-debugging.AppSignal's MCP server hands Claude, Cursor, or Zed your real errors, traces, and the deploy that shipped them. AI writes the fix; you review the diff.
-
Your monitoring isn't a stack. It's a pile. Fix that.Replace Datadog, New Relic, and Sentry without adding three more dashboards.
-
1
btop
A monitor of resources
btop is a cross-platform, C++ resource monitor featuring a terminal-based UI, rich visuals, and live stats for CPU, RAM, disks, networks, and processes. It supports mouse controls, filters, signal sending (SIGTERM/KILL), theme customization, GPU, battery support, and runs on Linux, macOS, BSD (with specific builds), via static binaries linked with musl. -
2
VoIP monitor
VoIP SIP and SKINNY quality analyzer and packet / audio recording tool
VoIPmonitor is open source network packet sniffer with commercial frontend for SIP SKINNY MGCP RTP and RTCP VoIP protocols running on linux. VoIPmonitor is designed to analyze quality of VoIP call based on network parameters - delay variation and packet loss according to ITU-T G.107 E-model which predicts quality on MOS scale. Calls with all relevant statistics are saved to MySQL or ODBC database. Optionally each call can be saved to pcap file with either only SIP / SKINNY protocol or... -
3
Atmosphère
Atmosphère is a work-in-progress customized firmware for the Nintendo
Atmosphère is an open-source custom firmware platform for the Nintendo Switch that enables advanced system customization, homebrew development, and extended functionality beyond the official operating system. It replaces and modifies key components of the system software, including the bootloader, kernel modules, and system services, allowing developers to hook into and extend system behavior. The project is composed of multiple subsystems such as Fusée for bootloading, Exosphère for secure monitor customization, and Stratosphère for system module extensions. ... -
4
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
5
conky
Light-weight system monitor for X
Conky is a free, light-weight system monitor for X, that displays any kind of information on your desktop. Conky is free software and runs in X on Linux and BSD. Originally a fork of Torsmo, Conky's torsmo-based code is BSD licensed. New code in Conky has been licensed under GPL 3.0. Since its inception, Conky has changed significantly from its predecessor, while maintaining simplicity and configurability. -
6
Icinga 2
The core of our monitoring platform
Icinga is a monitoring system that checks the availability of your network resources, notifies users of outages, and generates performance data for reporting. Scalable and extensible, Icinga can monitor large, complex environments across multiple locations. This includes your data center as well as your private, public, or hybrid clouds. Icinga 2 is the monitoring server and requires Icinga Web 2 on top in your Icinga Stack. -
7
tmux-mem-cpu-load
CPU, RAM, and load monitor for use with tmux
tmux-mem-cpu-load is a lightweight system monitoring utility designed for the tmux status line. It gives terminal users a compact way to view memory usage, CPU usage, and system load without opening a separate monitoring program. The tool is especially useful for developers, server administrators, and power users who spend long sessions inside tmux. It displays used and available memory in a concise format that fits naturally in a terminal status bar. It also shows CPU usage as a percentage... -
8
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in... -
9
PortAlert
TCP Ports Monitoring Tool with Email, Teams and Telegram alerts
PortAlert continuously checks TCP ports on servers, network devices, databases, web services, and applications, and sends alert notifications when a service becomes unavailable or is restored. When ports time out, additional 3 PING host response results are included in the alert text (helps identify network vs application issues). PortAlert is working in multi-threaded workers to monitor targets in parallel, it designed for small and medium businesses that need simple monitoring without... -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
11
PingAlert
Multi-thread Ping Hosts Monitor Tool. Email/ Teams/ Telegram alerts
PingAlert check multiple hosts in parallel using multi-threaded workers instead of checking one by one. This is especially useful for small and medium businesses monitoring many servers, routers, switches, firewalls, Internet connections, cloud services, VPN endpoints, and branch office devices When a monitored host fails continuously and reaches threshold, a DOWN alert is sent. No repeated DOWN alerts sending when it remains DOWN. When the host becomes reachable again, a RECOVERY... -
12
WebChangeMonitor
Monitors a number of web pages for changes.
Monitors a number of web pages and tracks changes based on the content of the web pages. Allows to monitor several protocols, including HTTP and HTTPS. Allows to view and record differences. Available for Win7/10/11/+, Linux and others. -
13
CPUAlert
High / Low CPU & MEMORY usage alerts by Email / Teams / Telegram
Simple and powerful CPU & MEMORY monitoring tool for Windows and Linux. Detect both HIGH and LOW usage, avoid repeated alert spam, and identify the TOP1-TOP5 process causing the issue. Alert only when usage continuously exceeds the threshold and back to normal. It monitors CPU and RAM usage and sends Email, Microsoft Teams, and Telegram alert notifications when usage remains above or below configured thresholds. CPUAlert is designed for small and medium businesses that need simple... -
14
babyshark
terminal based packet sniffer
Primary goal is to monitor specific packet "streams" (same source, destination MAC, IP, and UDP port, VLAN, and PCP value on embedded platforms without a GUI. It also monitors ARP requests and responses and can be used as a packet generator. It uses ncurses colorization. If you find this project useful and want to show your appreciation drop me a note or you can buy me a coffee: https://www.buymeacoffee.com/davidverbree -
15
xsnow
Let it snow on your desktop
Finally, a working xsnow for Gnome, KDE, etc. Based on the original xsnow-1.42 created by Rick Jansen, after the xsnow-2019 conference in Antas (Spain) we now have available a xsnow that works on many desktop environments, even Raspian. By request of many beta-testers, a graphical front end has been created as well. For non-Unix users, there is https://sourceforge.net/projects/wsnow . -
16
lixa
LIXA, LIbre XA, is a free and open source XA transaction manager
LIXA (LIbre XA) is an open source and free Transaction Manager implementing the distributed transaction processing "XA specification" and "TX (transaction demarcation) specification" according to the X/Open CAE Specification. LIXA implements even XTA: XA Transaction API, an innovative API that implements XA transactional context passing among different applications. LIXA is a Transaction Manager but it's not a Transaction Monitor: this is the distinguishing feature of the project. LIXA... -
17
TorRefresher-proxy
One-click Tor IP refresher with bridge support built-in
TorRefresher is a lightweight Windows tray application designed to make using Tor simple and efficient. Built to work with the official Tor Expert Bundle, it gives you full control over your Tor connection without needing to touch the command line. 🔄 Automatic IP Rotation – Refresh your Tor circuit on a timer of your choice 🖱 One-Click Manual Refresh – Instantly change your IP from the tray 🌍 Exit Node Info – See your current IP and country at a glance 🔒 Bridge Mode Support –... -
18
SerialTest
A cross platform debugger for serial port/Bluetooth/TCP/UDP
A versatile test tool running on Windows/Linux/macOS/Android. Works as data transceiver/realtime plotter/shortcut/file transceiver. Supports serial port, Bluetooth SPP client/server, Bluetooth LE client, TCP client/server, UDP. Homepage: https://github.com/wh201906/SerialTest -
19
OpenDDS
OpenDDS is open source publish/subscribe middleware
OpenDDS is an open source implementation of the Object Management Group (OMG) Data Distribution Service (DDS), providing a publish/subscribe middleware solution for real-time distributed systems. OpenDDS includes development and run-time tools. Full product information, source code, documentation, build instructions, and license information are available from http://www.opendds.org. Commercial consulting, support, and training for OpenDDS are available. OpenDDS is in production use... -
20
HomePowerControl
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)... -
21
Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.
-
22
RCDCap
RCDCap is a remote capture preprocessor
RCDCap is a packet processing framework. At its core, it incorporates basic mechanisms for local and remote capturing and decapsulation of packets (CISCO ERSPAN and HP ERM are supported). It can be extended to support many types of packet-based traffic analysis by creating plug-ins and loading them in the main application. It includes many optimizations to ensure high performance traffic processing. Some of them are: multithreaded traffic processing; explicit thread pinning; configurable... -
23
Network Utilization Monitor
Internet bandwidth utilization monitor
This application helps to determine, which device in the Local Network (LAN) consumes Internet. Calculates separately incoming and outgoing traffic. Requirements: * Network tap or L2 Managed Switch with option to mirror traffic to specified port * Windows XP 32-bit (or better) * .NET Framework 4.0 (or better) * WinPcap 4.1.3 (in archive) * Microsoft Visual C++ 2015 Runtime (x86) (in archive) If your gateway is powered by Windows, you can try to run this app and select Network... -
24
WMBars is a Window-Maker compatible dockapp that can monitor certain things dependant upon the XML-format configuration file. It displays up to three bar graphs with a title and value, but can monitor many more things.
-
25
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app.