Search Results for "driver device tpkd"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

...Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! Changes in v1.2: Avoid using Spectranet RAM page 0 used by the device itself. Thanks to this change this driver can be used with the upcoming driver for networked disk image. This driver can work along with spectran.fid driver exposing other networking capabilities of Spectranet device to the CP/M system.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it.

FiwixOS 3 is a Fiwix distribution, an operating system made from a software collection that is based upon the Fiwix kernel. It basically comprises a Fiwix kernel, GNU tools, libraries and additional software. All the included software is free and open-source software made available both as compiled binaries and in source code form, which allows modifications to the original software. FiwixOS 3 uses the Newlib v3.1.0 as its C standard library, and the Ext2 as its primary file...

XeNOS is a portable microkernel operating system written mostly in C++. Its primary goal is to provide a simple, object oriented device driver interface and API.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

Mind the re-programmable hardware, even CPU for most mobile devices. Flushable devices. Flushable CPU, modem, camera - any kind of EMPTY NAND device, creating a new one by the engineering forth and back and forward again. We recreate the world

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

A general driver for controlling a HD44780 (and compatible) Microcontroller over the pc parallel port or any i/o device. This kind of microcontroller is typically used in LCDs (liquid crystal displays).

beetleOS is a small and flexible real time OS for embedded systems with preemptive multitasking. It also provides a lightweight device-driver framework. It is basically programmed for the ARM7 processor architecture but it could be ported to other archit