Search Results for "soil"

OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ...

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from...

The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface...