Search Results for "pump"

The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire...

Firmware for home made ECU/PCM (Electronic Fuel Injection & ignition controller) for 2006 Ford Mustang car. It also supports vehicle's CAN bus to exchange data with smart junction box unit (gauge cluster && a/c). Project is based on megasquirt project, it uses same tuning tools (megatune/TunerStudio MS). There are three CPUs in total, so project contains three diferent firmwares for each microcontroller. Main CPU is NXP ARM7 LPC2366 running AOS operating system (also my project). Remaining...

...PCB layouts are included, and code for the raspberry pi which controls the heating via a web front-end. The project replaces the "junction box" that connects boiler, programmer, pump, motorised valve, and thermostats together and makes most of these software accessible. The Raspberry Pi is connected by an umbilical lead using i2c. WARNING: this involves rewiring mains connections - at your own risk. Be extra sure you know what you are doing!

Automatic fan/water pump speed control for a water-cooled pc.

yieldbuddy is an open source hydroponics controller for your indoor or outdoor grow. The Arduino sends multiple serial messages a second containing information like sensor values, relay on/off states, manual/auto modes, etc. The web interface (hosted by the Raspberry Pi running Apache2 and PHP5), allows you to login to the page and from there you can see graphs of all your sensors, their current values, whether or not your equipment is on/off (relay states), your web camera, etc. The...

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

...BSAC is developed on the brew-in-a-bag (or brew-in-a-bucket) concept and mainly suitable for this kind of setup. The author has a high-tech, stainless steel version of this setup with pump and valves. Presently the software runs on a Linux controller (ARM based) and with a certain display HW. It is also being ported to a standard Linux PC with standard display. The project contains an abstraction layer to make all sorts of porting to other target platforms easier. The BSAC project includes documentation for at least two complete setups (57L and 210L) with actual pumps, valves, fixtures, brewing pots etc. ...

pump is the fast and powerful download manager for POSIX-compliant operation systems. It consist of separate UNIX-daemon and a couple of front-ends including Qt, GTK, web and ncurses one.

PuMP stands for "Process (Unix) Management Protocol", and is intended to be implemented as a new service that permits the remote administration of the running processes on a server.