Search Results for "coldfire"

...This includes GDB sprites providing a complete open source development toolchain. - A set of stand-alone programmer applications. These support programming of RS08, HCS08, HCS12, Coldfire and Kinetis devices. Where applicable, the software is available for Windows and Linux.

Poptop is an open source implementation of a PPTP server. Running under x86 or embedded Motorola ColdFire architectures Poptop provides full interoperability with the Microsoft PPTP VPN client.

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO board. ...

SkyEye is a very fast full system simulator which takes llvm as IR of dynmic compiled framework.. It can simulate series ARM, Coldfire,Mips, Powerpc, Sparc, x86, TI DSP and Blackfin DSP Processor. Also can simulate multicore system by the multicore of host. The commercial support is provided by DigiProto Co. (http://www.digiproto.com)

Sample code for hx8347-A and SSD1289 for 8bits MCU ( begin with Freescale MCU 9s08aw60 with codewarrior V10.x and now Coldfire V1) , print text , draw line , box , circle, scrolling, get coordinates of touchpanel , read BMP file and FATlite drivers from Freescale revised ( FAT16 ). Tested on 9s08aw60 demoboard : http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=DEMO9S08AW60E&fr=g New release with Coldfire V1 Flexis MCF51AC256A (32bits) pins to pins compatible with 9s08aw60

A free Modbus RTU/ASCII implementation for embedded systems. It is designed to be portable and ports are available for ARM STR71x, ATMega168, Freescale/Motorola Coldfire MCF5235, TI-MSP430, LPC214X, Z8Encore, Win32 and Linux.

Helium is a minimalistic real-time scheduler for 8 and 32-Bit microcontrollers. The current version of Helium has been ported for Freescale's HCS08 and Coldfire cores.

Boot loader and FLASH burner for the Motorola 68360 processor (aka Power QUICC). Based on CoLILO linux loader for Motorola Coldfire processors, however this boot loader is OS independent. Supports systems with multiple FLASH devices, runs from RAM for f