Search Results for "camera ip"

Complete HomeKit integration for UniFi Protect with full support for most features including autoconfiguration, motion detection, and multiple controllers. homebridge-unifi-protect is a Homebridge plugin that provides HomeKit support to the UniFi Protect device ecosystem. UniFi Protect is Ubiquiti's video security platform, with rich camera, doorbell, and NVR controller hardware options for you to choose from, as well as an app which you can use to view, configure and manage your video...

...It not only saves costs of data transmission and storage but also makes devices able to respond according to the events shown in the images or videos without connecting to the cloud. One of the applications of this intelligent gateway is to use the camera to monitor the place you care about. For example, Figure 3 shows the analyzed results from the camera hosted in the DT42 office. The frames were captured by the IP camera and they were submitted into the AI engine. The output from the AI engine will be shown in the dashboard.

motionEyeOS is a Linux distribution that turns a single-board computer into a video surveillance system. The OS is based on BuildRoot and uses motion as a backend and motionEye for the frontend. Compatible with most USB cameras as well as with the Raspberry PI camera module. Motion detection with email notifications and working schedule. JPEG files for still images, AVI files for videos. Connects to your local network using ethernet or wifi. File storage on SD card, USB drive or network SMB...

raspbian-lite based image with omxplayercamview.service Install/Setup/Configure with: 1) Download latest img, and write to sd card. 2) After install and reboot, login using : pi/raspberry a) Go ahead and change your password for the pi account. b) Enable/start ssh server sudo systemctl enable ssh sudo systemctl start ssh Note:If you dont enable ssh server and you setup your camera as kiosk, you may find it difficult to resetup another camera view unless you disconnect from network/ or reboot, this is due to the nature of a persistent service, with no exit hooks, yet. 3) $sudo edit /etc/systemd/system/omxplayercamview.service Change line #18 to your camera's ip/port Optional: *adjust 15 second timeout *adjust 3 second up as needed @ Restart=on-failure value near end of file 4) Enable service $sudo systemctl enable omxplayercamview.service 5) start service $sudo systemctl start omxplayercamview.service 6) $sudo reboot

Serveur domotique développé en PHP permettant de controler plusieurs cartes IPX800 (Gce.electronics).

This project provides the source code for the Pacific Communications EVOnet-C-SM-10DNW PTZ IP Security camera. The EVOnet-C-SM-10DNW is manufactured by IDIS in Korea and is also known as the S-SM-10DNW by IDIS. This firmware was obtained under GPL from OpenSource IDIS <opensource.cctv@gmail.com> and is now being distributed online under the same licenses. This project is not sponsored or supported in any way by Pacific Communications or IDIS.

Ripper Rom for the I9305

this project aim to have a very simple and effective software for the video surveillance. this software support multiple camera( Ip camera and Web Camera) rendering, with the capability to detect motion and recording video.

ipc guader is an embeded software system for IP Camera which provides the whole function of IPC like audio/video streaming server, alarm process, PTZ control, local/remote storage, two-way voice, DDNS, P2P service. Funcitions list: Liveview:local liveview(BNC out), network liveview, support IE/Firefox/safari Recording:recording to MicroSD/u-disk/NAS MediaServer:support rtsp/rtp and own protocol streaming server.

AxisCameraEmulator is a simple IP video camera emulator, which can be used to test CCTV software. It partially emulate Axis 223M network camera, using jpeg files as video steam. It support small subset of Axis VAPIX.