A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools.
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.
Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno, with firmware, application and ASCOM support. Lots of options and driver boards supported. Tested on Windows, Linux and Mac, Moonlite compatible. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT.
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms
Editor for Fixed Width, Csv and Existing Xml files.
The RecordEditor is a Data File editor for Flat Files (delimited and fixed field position). It supports Unix / PC / Legacy (e.g. Mainframe) file formats, both Text and binary files. The Editor uses a Record-Layout description to format the files. This is ideal for Fixed width (Text or Binary) files, Cobol Data Files, Mainframe files and complicated Csv files. Cobol Copybooks can be used to format Cobol Data files. As well as an editor, The following utilities are supplied * Formatted Compare * File Copy and reformat Utility * FileWizard this is use to work out the format of a File. It can generally find both Text and binary / packed deicimal fields in a file For Simple Csv you should look at its sister project reCsvEditor. Note: The core Editor code is also used in the "Protocol buffers editor" and "Avro Editor"
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell.
i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.
libmylcd is a frame & font rendering library and toolkit designed to provide low level access to 2D hardware via a video framebuffer. Supported devices include SED133x, T6963C, PCD8544, S1D15G10, USBD480, PCF8833, PCF8814, USB13700, S1D15G14.
Open HPI is an open source implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers.
Mainframe Emulator - Mirror of http://www.hercules-390.org/
Hercules is an open source software implementation of the mainframe System/370 and ESA/390 architectures, in addition to the new 64-bit z/Architecture. Hercules runs under Linux, Windows, Solaris, FreeBSD, and Mac OS X. Hercules was created by Roger Bowler and is maintained by Jay Maynard. Jan Jaeger designed and implemented many of the advanced features of Hercules, including dynamic reconfiguration, integrated console, interpretive execution and z/Architecture support. A dedicated crew of programmers is constantly at work implementing new features and fixing bugs.
Driver para impresor / controlador fiscal EPSON en JAVA. Utiliza JNI para comunicacion con puerto serie. Testeado en winxp, linux x86_64, win7 32 / 64 sobre TMU-220AF. solo rollo papel continuo (chicos)
libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.
C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.
Control your computer with an IR remote
This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.
An object-oriented framework for the development of instrument drivers
pyhard2 is an object-oriented framework to help in the development of instrument drivers. pyhard2 is proposed as an alternative to LabVIEW. Emphasis is given on serial drivers but the framework can be used with any socket. The source also contains the implementation of a PID controller and a setpoint ramp generator. The instrument drivers may further be incorporated in a GUI, using, e.g. PyQt or PySide. Threading is automatically taken care of. Furthermore, generic GUI (called controllers) are provided and can be extended.
Key Scripter listens to key press/release events from a keyboard or a mouse and allows generation of fake events. Supports gaming keypads such as Nostromo SpeedPad. Allows creation and usage of complicated key scripts for games and other applications
A system for programming LPC, STM32 and possible others devices.
This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.
This SourceForge page is no longer maintained. To find downloads, source code, or documentation for the PostgreSQL project, please see our home page: http://www.postgresql.org.
A memory device programmer (Flash / EPROM / E2PROM) board and software, connected to PC by USB port. Placa e software para gravação de memórias (Flash / EPROM / E2PROM), conectada ao PC através de porta USB.
The dynax driver framework provides common C++ driver and device classes for platform independent kernel driver development. The framework is based on interface implementations for KMDF (Windows), IOKit (OSX) and Linux (planned).
nInfo System Information Libraries
nInfo is a collection of libraries that provide cross platform information about various system components, such as hardware, filesystems, ...
uLan is message oriented multi-master communication protocol for microcontrollers. It uses 9-bit character format for addressing and link control and RS-485 physical layer. More RS-485 cards, converters for PC RS-232 ports and embedded MCUs are supported