Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell.
FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32
An attempt to write a driver for Canon CAPT-printers, including, but not limited to, LBP-2900. THIS PROJECT IS OUTDATED AND INACTIVE. The new and supported version is located at https://github.com/agalakhov/captdriver
Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. Requires ACPI.
Disable, Get, or Set the APM timer found in recent WD Hard Disks
APMtimer provides a Linux/Unix utility that can permanently Disable, Get, or Set the value of the APM timer found in recent Western Digital 2.5 WD*PVX Hard Disks where the APM setting defaults to 0x60 after a power cycle.
A GUI utility to upgrade APC PDU firmware
It's a GUI program to upgrade firmware and get configuration sets for APC rack PDUs. It is written by Tcl/Tk.
Quiet Fan implements a control loop to set your CPU or motherboard fan speed. This means that it uses the lowest possible fan speed to keep a target temperature, and eliminates damaging hardware temperature oscillations.
LED Color Control System for RaspberryPi and Dreambox
Free MSP430 Debugger is developed in two steps : a library to provide access to the debugger hardware, and a "gdbproxy" to allow users to debug their software. This project is currently working with OLIMEX MSP430 JTAG ISO & msp430-gdbproxy.
This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.
eilin is a Linux utility to control settings of EIZO monitors.
eilin is a Linux library and an utility to control settings of EIZO monitors.
A utility for parallelizing the execution of shell functions.
PRLL HAS MOVED TO GITHUB https://github.com/exzombie/prll A utility for parallelizing the execution of shell functions. Focuses on convenience in interactive use, but is just as usable in shell scripts. Put your multicore to good use, or combine prll with ssh to create an instant cluster.
A GUI program to view information/status of APC rack PDUs.
ARPIC is a GUI program to let users view information/status of APC rack PDUs. It is written by Tcl/Tk.
A program that can plugging CPU core
CPU Hot Plugging (chp) is created by Kafabih (kr code) inspired by Thunderzap android custom kernel cpu governor to reduce battery consumptions because of your laptop CPU usages. Please use carefully, chp can cause system crash or hang because of hot plugging cpu core.
Computer Configurator is a project that is designed to help anyone configure a PC in self service mode. The project is in planning stage and I invite people to participate in the project and help us build an ideal configurator.
An XKB keymap editor
Create your own cockpit for flying in FlightGear and other simulators.
FlightGear Controller (fgctrl) is a combination of software and hardware (mostly AVR-based) that let you build a simplified cockpit for controlling aircraft in FlightGear and other flight simulators.
Control your computer with an IR remote
This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.
JCont is a tool that can be used for running applications using your joystick's buttons or axis movement. It can recognize events from more than one joystick device at once.
CUPS drivers and software for Panasonic KP-X series dot-matrix printers. The goal is to minimize use of 3rd party filters while allowing full control of graphical printing and replicating the original control software functions on Unix-like OS's.
LinuxPad is a python script that helps you manage your Thinkpad laptop.
Plugins to be used with Ivman.
A Linux driver for RTD DM5408 / DM408 ISA acquisition card
A Linux driver for RTD DM5408 / DM408 ISA acquisition card. A DKMS module and a dynamic library written from scratch but trying to keep same functions structure of its official Windows 98 driver. I don't recommend it for production. I'm just trying to learn writing drivers for Linux with some interest in Electronics Interfacing. I may try later to rewrite for Comedi.
Surrogatus is a small inexpensive computer, approx. the size of a USB hub that runs Linux on a firmware and has many different uses pertaining to privacy and security. The word "surrogatus" is latin for "used as a surrogate".