A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools.
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
This is a virtual floppy drive for Windows NT / 2000 / XP / 2003 / Vista / Windows 7 (both 32-bit and 64-bit versions)
System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell.
Software control for the BitFenix Recon fan controller.
Phoebetria lets you take control of your BitFenix Recon fan controller on more operating systems than the official software. It offers all of the same features as the official software, with the exception of remote access, and has been tested on Windows, Linux, and OS X. The current plan is that future releases will add functionality and control that the official software does not provide -- giving you even more control over your fans.
Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCBs BASED ON THIS PROJECT without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell for commercial gain the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT COPY/RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS OR PCB FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Use of this project, circuit, firmware and applications is deemed acceptance of the above.
ATTENTION: This project is not maintained anymore. Current Macs properly manage temperature and fans. Speed fan controller and temp monitoring for MacBook Pro Unibody (Nvidia) for Windows under BootCamp. It allows to control MacBook fans speeds depending on the CPU and GPU temperature. ATTENTION: This program is designed and tested only on MacBook Pro with NVIDIA GPU. On newer MacBooks with ATI GPU the GPU temperature is not checked. On iMacs some sensors and fans are not used. In any case USE AT YOUR OWN RISK, I'm not responsible for overheating or hardware damage.
Allows control of fans in Apple computers in Windows and monitoring of temperatures. All Intel Macs supported + any conflicting programs are automatically closed and reopened. Project is no longer being actively developed. See forum for alternatives.
usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.
SSD Management Tool
Naraeon SSD Tools is a SSD Management Tool. It does Manual trim, Secure erase, Firmware update. And it also provides automatic endurance monitor so you can be warned when the SSD goes wrong.
Fast Fourier Transforms (FFT) for Multi-CPU (and RAM) Stress Testing. Shows detailed information about physical and logical processors in the system. Included CPU Benchmark feature for speed testing. Automatically utilizes and tests all CPU cores.
libmylcd is a frame & font rendering library and toolkit designed to provide low level access to 2D hardware via a video framebuffer. Supported devices include SED133x, T6963C, PCD8544, S1D15G10, USBD480, PCF8833, PCF8814, USB13700, S1D15G14.
Temperature dependent overclock utility for AMD Phenom II BE processors, which provides functionality similar to Intel's Turbo Boost. .02 version mostly works with win7 (see forums).
Mainframe Emulator - Mirror of http://www.hercules-390.org/
Hercules is an open source software implementation of the mainframe System/370 and ESA/390 architectures, in addition to the new 64-bit z/Architecture. Hercules runs under Linux, Windows, Solaris, FreeBSD, and Mac OS X. Hercules was created by Roger Bowler and is maintained by Jay Maynard. Jan Jaeger designed and implemented many of the advanced features of Hercules, including dynamic reconfiguration, integrated console, interpretive execution and z/Architecture support. A dedicated crew of programmers is constantly at work implementing new features and fixing bugs.
ASCOM driver for the LittleFoot Elegance Photo (LFEP) telescope controller. Firmware 6.x is fully supported - firmware 5.x is partially supported (all LFEP features are available but configuration is only possible by handbox). Contains drivers for telescope, focuser, camera, filter wheel, roof controller and dew heater which shares a single connection to the controller.
WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.
This is a remote admin app for Windows that gathers live info via WMI. No installation required. Visit http://lazyadmin.sourceforge.net/ for latest info, screenshots and details. Send feedback! ;)
Server benchmark and burn in software.
Server Benchmark [s.b] allows server engineers and administrators to quickly complete the "burn in" phase of your server and VDI provisioning process. The software also allows users to benchmark processing and memory utilization by dynamically adding threads and building arrays to test memory capacity. Server Benchmark is also a great way to maximize capacity and test response from within your existing Citrix XenApp farm, and VDI infrastructure. Source code is attached to the "Source" folder.
C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.
Disc ejection software that sits in the Windows tray.
Disc Ejector is a small, light-weight tool that resides in the Windows® tray, and is capable of ejecting and loading optical discs for either slot type, or tray type optical drives. A 64-bit installer is available under the "Files" section.
Complete PC Audit & Inventory software utility
Complete PC Audit & Inventory software utility that assists you while installing, optimizing or troubleshooting your computer by providing all the information you can think of about your system - from hardware devices and installed drivers to operating system security and stability metrics. More than just system information, SysConfig also offers comprehensive benchmarking and hardware monitoring capabilities with real-time reporting. Leverage these powerful tools to compare your computer's performance to other computers and prevent hardware failures. Dynamic software detection keeps track of your operating system and what's installed on it. This includes software licenses, drivers, processes, anti-virus definition files, security updates and much more. Real-time hardware monitoring helps you keep an eye on your investment by providing visuals on your system's thermal and power levels as well as its overall health at all times.