A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices
I/O performance Analysis Tool
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools.
Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCBs BASED ON THIS PROJECT without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell for commercial gain the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT COPY/RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS OR PCB FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Use of this project, circuit, firmware and applications is deemed acceptance of the above.
System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.
Software control for the BitFenix Recon fan controller.
Phoebetria lets you take control of your BitFenix Recon fan controller on more operating systems than the official software. It offers all of the same features as the official software, with the exception of remote access, and has been tested on Windows, Linux, and OS X. The current plan is that future releases will add functionality and control that the official software does not provide -- giving you even more control over your fans.
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell.
usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.
phpSysInfo is a customizable PHP Script that parses /proc, and formats information nicely. It will display information about system facts like Uptime, CPU, Memory, PCI devices, SCSI devices, IDE devices, Network adapters, Disk usage, and more.
Button Masher is a simple utility to help you analyse and improve your execution of fighting game moves, combos, etc. It's similar to the joystick input display in some games' practice modes.
Mainframe Emulator - Mirror of http://www.hercules-390.org/
Hercules is an open source software implementation of the mainframe System/370 and ESA/390 architectures, in addition to the new 64-bit z/Architecture. Hercules runs under Linux, Windows, Solaris, FreeBSD, and Mac OS X. Hercules was created by Roger Bowler and is maintained by Jay Maynard. Jan Jaeger designed and implemented many of the advanced features of Hercules, including dynamic reconfiguration, integrated console, interpretive execution and z/Architecture support. A dedicated crew of programmers is constantly at work implementing new features and fixing bugs.
Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.
These tools are used to view information about, and to control, Media Changer devices such as Tape and DVD/CD libraries.
C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.
SpokePOV is an open source persistence of vision project, with hardware (schematics), firmware (in C) and software (retargetable wxWidgets). Well tested and easy to use, it is a complete system that is easily adapted.
DVD/CD UDF disc drive tools, esp. for the Iomega RRD (aka Iomega REV) drive. Usability patches for UDF mkfs and fsck. Commentary for the lk MMC and UDF source code. cvs co tarballs for firewalls that defeat CVS. Links, FAQ's, troubleshooting hints.
URBI: Universal Robotic Body Interface. URBI is a scripted command language used to control robots (AIBO, pioneer,...). It is a robot-independant API based on a client/server architecture. Liburbi C++/Java/Matlab are available here. Forum available at ht
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial devices) are able to be controlled. KMTronic's USB and Serial relay boards are selectable in the configuration menu, other boards can be setup by entering their control commands. Although primarily designed for irrigation you can use AIC to control a large variety of hardware, for example lighting, heating etc It is envisaged that future implementations of AIC will incorporate rules for more complex device control.
Open source, cross platform driver set for the Rez Trancevibrator
USB Radio has the goal to develop both the hardware and the software for a USB connected radio. A user should be able to control the radio from the computer and record and save broadcasts to hard drive.
A simple tool to convert sysex parameter settings of Behringer's BCR2000 Midi controller.
a micro processor 16 bits optimized to hold in a CPLD
A multiplatform programming language for every kind of platform from a microcontroller to a computer,Based on Adaptors and Terminals,It means you designing Adaptors and Terminals and Concat them(e.g for type a key on keyboard and displaying in monitor you
D.home.otic aims to produce a stable, scalable and upgradable home-automation system. Based on PIC microcontrollers and USB interface.