A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices
Graphical program to map keyboard and mouse controls to a gamepad
antimicro is a graphical program used to map keyboard keys and mouse controls to a gamepad. It's useful for using a gamepad on PC games that do not have any form of built-in gamepad support. This program can also be used to control any desktop application with a gamepad. On Linux, this means that your system has to be running an X environment in order to run this program. This program currently works with various Linux distributions, Windows (Vista and later), and FreeBSD, but with limited support for FreeBSD and Windows XP.
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.
Project's goal is to create better tools for diagnosing Linux systems. Diagnostics include first failure data capture, error log analysis, preventative testing, and system inventory gathering.
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools.
A very high quality package of printer drivers for CUPS on Linux, Macintosh OS X, and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.
This project manages the libraries, configuration, and diagnostic tools for Wacom tablets running under Linux. It also maintains updated Linux kernel drivers and Xorg/XFree86 XInput drivers.
Linux Infrared Remote Control
LIRC is a package that supports receiving and sending IR signals of IR remote controls, adding functionality and flexibility to the basic support in the Linux kernel. Support for LIRC is ubiquitous in Linux HTPC applications; it's also packaged in all major Linux distributions. Despite it's name, LIRC also works on OSX.
setserial is a program designed to set and/or report the configuration information associated with a serial port.
*OBSOLETE* The project has moved to [GitHub](https://github.com/ipmitool/ipmitool). IPMItool provides a simple command-line interface to IPMI-enabled devices through an IPMIv1.5 or IPMIv2.0 LAN interface or Linux/Solaris kernel driver.
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell.
Project moved to https://github.com/owfs/owfs/
Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc
Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCBs BASED ON THIS PROJECT without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell for commercial gain the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT COPY/RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS OR PCB FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Use of this project, circuit, firmware and applications is deemed acceptance of the above.
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.
Editor for Fixed Width, Csv and Existing Xml files.
The RecordEditor is a Data File editor for Flat Files (delimited and fixed field position). It supports Unix / PC / Legacy (e.g. Mainframe) file formats, both Text and binary files. The Editor uses a Record-Layout description to format the files. This is ideal for Fixed width (Text or Binary) files, Cobol Data Files, Mainframe files and complicated Csv files. Cobol Copybooks can be used to format Cobol Data files. As well as an editor, The following utilities are supplied * Formatted Compare * File Copy and reformat Utility * FileWizard this is use to work out the format of a File. It can generally find both Text and binary / packed deicimal fields in a file For Simple Csv you should look at its sister project reCsvEditor. Note: The core Editor code is also used in the "Protocol buffers editor" and "Avro Editor"
i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
libusbx is OBSOLETE - use http://libusb.info
libusbx is OBSOLETE and has been superseded by http://libusb.info
Cellular manager for mobile phones/modems
Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp
The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI).
Paleta de Componentes para as Linguagens Delphi e Lazarus, compatível com Windows e Linux, que permite acesso direto a equipamentos de Automação Comercial, sem DLL's, interagindo com eles direto na porta serial.