Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno, with firmware, application and ASCOM support. Lots of options and driver boards supported. Tested on Windows, Linux and Mac, Moonlite compatible. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT.
mySQM powered by Arduino Nano
A sky quality meter based on TLS237 and Arduino Nano. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the mySQM products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT. Code or portions of code may not be copied or used without appropriate credit given to author.
Console tool to send commands to projectors via serial port
bcon sends commands for remote-control via the serial port of your computer. It is a command-line based tool - so you can bind it to macros and other applications.
This software + hardware is designed to map lighting intensity.
This software + hardware is designed to map lighting intensity in a serie of successive locations. It uses a light dependent resistor to sense light level that was designed to measure light uniformity in an indoor seedling rack and can be useful for lighting devices designers, stage lighting, etc ...
Locks a laptop screen when its lid is closed.
LockOnLidClose will lock your screen when you close your laptop's lid. So the next time you open the lid, you will be prompted for your user password. Only for Windows Vista or later! Read README.TXT before using the application!
Sample code for Ocean Optics OmniDriver spectrometer device driver
Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more.
RC model shipping container crane system
Software to run an Arduino controlled hardware crane in order to load and unload model scale shipping containers to and from a container warehouse.
Program a button to send keystrokes to your computer
PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.
RGB power indicator
This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.
Monitor, Log, and Control Press Systems
PressMAN(TM) Press Monitoring System is a data acquisition system for monitoring press variables such as internal mat temperature and gas pressure, platen position and hydraulic pressure. Various models of PressMAN(TM) systems have been installed in mills worldwide. Features AITF's PressMAN(TM) systems include specially designed temperature and pressure probes for measuring internal mat temperature and gas pressure during pressing. PressMAN(TM) is a useful tool for developing and optimizing pressing schedules, adjusting closing parameters to improve heat transfer to the core and minimize air entrapment; adjusting decompression to reduce blows or decrease the decompression time. PressMAN(TM) provides the information needed to adjust parameters in real-time to ensure the best product quality with optimal use of fibre and adhesives. Set-up and training is provided at cost in your mill.
Make your Raspberry Pi to a Wi-Fi controllable LED Light
Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet. WiringPi is used to control the GPIOs for some feature and Indy (Internet Direct) is used to support all network feature like UDP-broadcasting and handling the HTTP-requests. The development platform is Lazarus.
Wintel based platform system power management and analysis utilities.
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.
Open-source cross-platform spectrometer device driver
SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).
Greenvale & Surrounding Suburbs Computer Repairs
Fix Your Computer In No Time! Smart PC Repairs provides proficient same day on-site computer repairs for your laptop, PC, Mac or network. Servicing entire Greenvale, Victoria & surrounding suburbs. Smart PC Repairs is an Australian company that provides comprehensive technical support for a wide range of technologies used in the home or office. Now that computers and mobile devices are commonplace in your household, lots of people find they need someone to provide support or repairs to their device. At Smart PC Repairs, we are here to help, please give us a call if you require our assistance. Servicing Attwood, Broadmeadows, Bulla, Campbellfield, Clarkefield, Coolaroo, Craigieburn, Dallas, Diggers Rest, Epping, Fawkner, Gladstone Park, Greenvale, Jacana, Kalkallo, Keilor, Meadow Heights, Melbourne Airport, Mernda, Mickleham, Mill Park, Oaklands Junction, Roxburgh Park, Somerton, Sunbury, Tullamarine, Wallan, Westmeadows, Wildwood, Yuroke & surrounding suburbs.
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
A simple Application that disables/enables your Touchscreen
A simple application that disables/enables your Touchscreen. The Touchscreen will be disabled/enabled for the current user. Other Users and the Log on - Screen are not affected. Tested under Windows 8 and Windows 10. Ein einfaches Programm das deinen Touchscreen deaktiviert bzw. wieder aktiviert. Der Touchscreen wird nur für den aktuellen User deaktiviert/aktiviert. Andere User und der Log in - Bildschirm sind nicht betroffen. Getestet unter Windows 8 und Windows 10.
A WDM Virtual Audio Loopback Cable/Device
Virtual-Audio-Pipeline:- A WDM Virtual Audio Cable/Device It is a WDM based Virtual Audio Device Driver, can be used as a Virtual Sound Card. No Hardware is requred. Can be used as an Audio Loopback Device. The following are its Features 1. Supports PCM, WAVEEXTENSIBLE format 2. Supports 8 to 32 bit sample format 3. Supports 8000 to 192000 Hz Sample rate 4. Supports upto 7.1 surround sound 5. Supports Windows MME, DS, KS, WASAPI 6. Can be used with DAWs 7. It have Volume control support 8. It have Peakmeter support for sending feedbacks my email is firstname.lastname@example.org
Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.
4Port USB2.0 controller (Arduino Nano) which you can connect/disconnect ports using remote software application. Ideal for Astronomy solutions such as focusers, cameras CCD, filters etc. Windows application provided for remote control. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. The schematic, code and ideas are released into the public domain. Users are free to implement these but may NOT sell projects based on this project for commercial gain without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Software Applications, Layout are protected by Copyright Law. Code or portions of code may not be copied or used without appropriate credit given to author.
This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.