This is a driver module for linux written in C language for the 310 apsx rfid reader. This device use the communication via uart (interrupt based) for dialect with a normal pc.
Development of a driver and utilities to use 3Com ADSL Modem USB at Linux and Windows operating systems. Desarrollo de un driver y utilidades para utilizar el 3Com ADSL Modem USB en los sistemas operativos Linux y Windows.
A Linux USB driver for 3Com's HomeConnect(tm) WebCam
A simple armv7h sdk
This is my sdk for usage with slackware on A20 devices like bananapi, cubietruck and olimex-som. For more info see https://github.com/tjohann/a20_sdk .
The goal of the AC '97 Modem Driver project is to develop an open source Linux device driver to support the modem functionality of the AC '97 Codec
This project is dedicated for supporting large SMP and cc-NUMA platform configuration using ACPI 2.0 or later, including cc-NUMA configuration support and implementation of various module drivers for hotplug, sleep states and large I/O subsystem.
Displays the contents of the files in the /proc/acpi and records their changes. Useful to get an idea of the ACPI properties of a computer and to see how entries are changing over time (as _should_ temperature or battery capacity).
Device Driver for the ACS USB servo controller (USBB-01 interface card). HID class USB device to contoll eight RC type servos, eight optically isolated current inputs and 8 current sink outputs.
The ADQ project aims to provide device drivers and a terminal based data acquisition and control program for the Meilhaus ME26 data acquisition board and the Meilhaus ME53 relay boards. The data can also be displayed in real time with a Web page.
It is a Non-official linux USB driver for the AUTHENTEC AES4000 fingerprint sensor. Written in C.
AKO provides hardware and software for rapid prototyping and development of robotic projects. It utilizes a distributed microcontroller network with a centralized controller.
Linux drivers to allow ALSA audio applications to communicate over the IEEE1394/Firewire bus. This allows audio and midi data to be shared between multiple workstations and audio devices on a 1394 network, using the IEC 61883-6 protocol
This tool let's you control the frequency and fan settings of your AMD/ATI video card. It depends on the proprietary AMD/ATI Catalyst display driver and makes use of the AMD Display Library (ADL).
A GUI utility to upgrade APC PDU firmware
It's a GUI program to upgrade firmware and get configuration sets for APC rack PDUs. It is written by Tcl/Tk.
A GUI program to view information/status of APC rack PDUs.
ARPIC is a GUI program to let users view information/status of APC rack PDUs. It is written by Tcl/Tk.
Disable, Get, or Set the APM timer found in recent WD Hard Disks
APMtimer provides a Linux/Unix utility that can permanently Disable, Get, or Set the value of the APM timer found in recent Western Digital 2.5 WD*PVX Hard Disks where the APM setting defaults to 0x60 after a power cycle.
AR-B1047 SRAM Linux device driver represents SRAM chips installed on the Acrosser AR-B1047 board as a set of files that may be accessed by user application and used for data that must be saved during power loss.
This is a driver for the SEK'D ARC88 Audio Recording Card. It provides the low level ALSA driver for recording and playing audio up to 8 tracks under Linux with this card.
The XCGL-PORT project was created to help accelerate ARM/IntelŽXScale porting of various features called out by the OSDL CGL Working Group (http://www.osdl.org/projects/cgl/) as a requirement for a Linux system running in a carrier grade environment.
Aggressive Rectangle Truncation (ART) with Location Verfication Mechanism is a localization algorithm in wireless sensor networks written in nesC.
Asynchronous Spatial Division Multiplexing Router for On-Chip Networks
This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)
This Project provides open source LINUX drivers for the ADSL-USB-Modem "AT-AR 215" by Allied Telesyn.
AOT4L is a Qt4 based monitor and overclocking tool for ATI (TM) based video cards under Linux OS which loads into system tray and stay runing all the time. It has support to read and change fan speed, memory and core clocks, thermal sensor values.
linremoted is an easy to use deamon for the ATI Remote Wonder II. You can easily configure all buttons of every aux-level.
AVR microcontroller burning utility