lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca
Software related to Ericsson mobile broadband modules (f3507g, f3607gw, f3307, c3607 and f5521gw).
Show system and ISDN information on external liquid crystal displays
Linux kernel module for many HP Omnibook/Pavillon, Toshiba Satellite (with Phoenix BIOS) and Compal laptops. It is based on the module found in the 'omke' project.
This is an attempt to write a Broadcom 43xx driver for Linux, based on this specification: http://bcm-specs.sipsolutions.net/
FoxController is a cross-platform application wich allows to control etherogeneous devices through a general pupose web service interface. FoxController uses a plug-in architecture in order to implement the low level communication with the devices
This is a hardware autodetection & configuration tool. It detects changes in the system's hardware configuration, and gives the option of configuring added or removed devices. This project is not maintained by Red Hat.
C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.
A driver for the Winbond W9967CF and W9968CF webcam IC's and hence the Webcam go and variations on it. See the project home page for details. Note that this project is dead. If you want it, ask me (scarfboy).
A driver for the 5DT datagloves written in pure C++ using only the STL. Meant to be cross-platform, but written on and developed for IRIX sytems.
Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.
FnFX enables owners of Toshiba laptops to change the LCD brightness, control the internal fan and use the special keys on their keyboard (Fn-x combinations, hotkeys).
Please note, we've moved to gnuradio.org.
MMC/SDSC/SDHC/SDXC SPI based card driver with an easy to use HAL.
A small, portable, client/server GUI designed to work on many types of hardware, including handheld computers and other embedded systems. For more information and downloads, see http://picogui.org
ViRT-K is a virtual Real-Time Kernel for the Cell Broadband Engine running under Linux
Utility to calibrate a serial connected touch screen from ELO Graphics. Calibration parameters can be used under X.
An Open-Source Library for Low-Power Approximate Computing Modules
The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source library facilitates research and development in approximate computing at higher abstraction levels, and to facilitate reproducible research and comparisons. In case of usage, please refer to our publication: Muhammad Shafique, Rehan Hafiz, Semeen Rehman, Walaa El-Harouni, Jörg Henkel, "Cross-Layer Approximate Computing: From Logic to Architectures", Design Automation Conference (DAC), 2016. Contributors: Authors, Vanshika Baoni, M. Abdullah Hanif http://ces.itec.kit.edu/lpACLib.php
Open source utility to (re)program flash BIOS chips. Initial support will be for the i-opener network appliance under Qnx since there is an immediate need.
Oww (One-Wire Weather) is a server and client for Dallas Semiconductor / AAG 1-wire weather station kits.
Linux driver for rtl8180 wlan card with philips, maxim or gct radio(other in future).Still under development!(Use at your own risk!).Managed and monitor mode working.Ad-hoc roughly working,WEP support with open authentication and promisc mode are ok also
libEPOS is a C library to control the EPOS motor control from maxon motor ( http://www.maxonmotor.com ) using a GNU/Linux system. This software is NOT from maxon motor, but was written from scratch by Marcus Hauser and others. The tar file is outdate
Linux ALSA Driver for Alesis MultiMix8 USB2.0
*** Please e-mail ALESIS for a Linux driver for the MultiMix8 USB2.0 - maybe we can get them to provide one, or some sort of developer information! here's a link: http://alesis.com/contact *** Linux ALSA Driver for Alesis MultiMix8 USB2.0 mixer audio interface, capable of multichannel recording. Currently this project has pre-alpha/research status. Any help appreciated. :-)
BrickOS is an alternative software environment for the LEGO(r) Mindstorms Robotic Invention System. The intent is to allow developers to write C and/or C++ code for the RIS platform.
hidtouch is an input device driver supporting USB touchscreens that are not recognized by Linux as event devices but as regular HID devices. A few companion programs will ease the setup and calibration process.