Linux and Windows utillity for Agilent U1230, U1240 and U1270 DMM
Command line utility for Agilent U1230, U1240 ans U1270 series digital multimeters (DMM). Both Linux and Windows are supported. So far only tested on U1252A, but the utillity do probably work with all the the following multimeters: Agilent U1231A, U1232A, U1233A, U1241A, U1242A, U1241B, U1242B, U1251A, U1252A, U1253A, U1251B, U1252B, U1253B, U1271A, U1272A, U1273A.
Open architecture GPU simulator and implementation
Documentation, simulator, compiler, and Verilog implementation of a completely open-architecture graphics processing unit. This design is intended for academic and commercial purposes. The first step is to develop a detailed GPU simulator and compiler. The second step is to implement the GPU in synthesizable Verilog. The third step is to develop a feedback loop between the simulator and implementation, allowing power, performance, and reliability aspects of the hardware to feed back into ever more detailed and accurate simulations of a complete GPU. LICENSING Primary licensing is GPLv3. Secondary is Commercial. Commercial licensing (use incompatible with GPLv3) will be available via an elected or appointed non-profit Facilitator. Revenue will be invested per the discretion of the Facilitator and an advisory board. By contributing to this project, you agree to these terms. [See our Wiki for more information](https://sourceforge.net/p/openshader/wiki/)
i-nex system hardware lister
I-Nex is an application that gathers information for hardware components available on your system and displays it using an user interface similar to the popular Windows tool CPU-Z.
Smart Home Irrigation System
The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface for temperature sensors. * Soil Moisure Sensors are responsible for sensing if the soil of irrigated flowers are wet or not. These sensors are attached to the Sensor Controller Module via slow speed I2C bus. The modules use 2-pin probes and drives them with 4 kHz square wave in order to avoid oxidating the probes. In my implementation I used these small water pumps from Conrad: http://www.conrad.hu/conrad.php?name=Products&pid=539090 The whole system is powered by a 12V / 4A SMPS.
beaglebone documentation and code
Learning forum for the TI Beagle Bone. Code and documentation resources.
Software driver for trialtuner dm800se
[Italiano] Addon per il driver del DVB-S2 del sunray (dm800se) per il supporto del triplo tuner (DVB-T e DVB-C). ATTENZIONE: le versioni "stabili" sono quelle pubblicate nella sezione download. I sorgenti si trovano nelle sotto-directory svn tags. La directory trunk del svn contiene la versione di sviluppo: può contenere codice non funzionante o non compilante. Utilizzarla solo per contribuire allo sviluppo. [English] DVB-S2 driver addon for sunray (dm800se), to activate the triple tuner (DVB-T and DVB-C). WARNING: "stable" versions are available for download. Their source codes are available under svn on sub-directories tags. Trunk dir contains unstable version: it may not work neither compile. Use this only to support development.
Linux Driver for the infamous ELSA Microlink ADSL modem (sold in Belgium and probably in Germany). Based upon SAGEM FPS800 drivers, themselves (heavily) based upon Analog Devices reference drivers.
This project aims to be an open-source driver for iRiver's great iFP flash portable player (www.iriver.com).
This project intends to build a complete CallerID-function for home- or small buisniess environments. It depends on simple hardware which everyone can build. It will present the incomming call's number on every workstation on the network.
This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.
Portatux is an interactive ncurses interface as well as a command line tool for controlling the 8 data pins in the parallel port in Linux and FreeBSD.
Aims Video4Linux-compatible video capture infrastructure for Solaris. Project develops bt848x driver for Brooktree/Conexant Bt8x8 (Bt848, Bt878 and Fusion878), saa713x driver for Philips SAA7130/7133/7134/7135 cards, header files and utilities
The UNH-iSCSI project consists of software implementations of Initiator and Target loadable modules for the IETF Networking (SAN) protocol iSCSI [RFC3720] with support for iSER [RFC5046].
Tools and patches to run Linux on the IBM NetworkStation 1000 series of thin clients.
Gnome ACPI viewer. Enables the user to view the battery percentage and AC status from the values in the /proc/acpi directory. We are restructering the cvs now. Please grab your stuff from the gacpi cvs directory.
BrickOS is an alternative software environment for the LEGO(r) Mindstorms Robotic Invention System. The intent is to allow developers to write C and/or C++ code for the RIS platform.
Provides access to Belkin Nostromo n50/n52 speedpads as more than simple USB keyboard devices via configuration GUI. Also includes a basic userland linux event interface and both OpenGL and OpenAL modules for video and audio.
The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)
A Windows NT4.0 and Windows 2000 Serial multi port driver for the Philips UART SC28L198 and 16C550 based single and multi port compatibles.
Tools around the Scenix 48/52 series microcontrollers
PalmWac is PalmOS software which will turn your PDA into a Wacom compatible tablet, suitable to be used under X11, gpm, or other O.S.
Moved to GitHub
This project has been moved to GitHub. See: https://github.com/crayzeewulf/libserial/
An attempt to create a VBE/AF driver for 3DFX Voodoo Cards, using the FreeBE framework.
Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]
This is the PCMCIA device driver for the 1-2 mbit Frequency Hopping Symbol Spectrum24 WLAN card. We've also moved the 11 mbit Direct Sequencing code here. The 2.2.x and 2.4.x code trees have been merged.