lsperf is an utility listing performance of various computer components.
Simple App to monitor macOS temperature
Identify sizes of memory modules installed on most UNIX-based systems
Identify sizes of memory modules installed on a Solaris, Linux, FreeBSD or HP-UX workstation or server. memconf reports the size of each SIMM/DIMM memory module installed in a system. It also reports the system type and any empty memory sockets. In verbose mode, it also reports the following information if available: - banner name, model and CPU/system frequencies - address range and bank numbers for each module
Hardware Abstraction Layer for microcontrollers, written in C++11.
Hardware abstraction layer for microcontrollers. Written in C++14.
mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.
Arduino Nano DC Motor Controller
An Arduino based controller for a DC motor focuser solution. Replaces RigelSys/JMI DC Controllers. Windows application and ASCOM driver available. Works with most DC motor solutions (eg RigelSys, JMI, Orion, Skywatcher etc). Feature rich and low cost. Build the controller for under $25. (c) Copyright Robert Brown 2014-2017. All Rights Reserved. The schematic, code and ideas are released into the public domain. Users are free to implement these but may NOT sell projects based on this project for commercial gain without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Software Applications (Windows and ASCOM drivers), Layout are protected by Copyright Law. Code or portions of code may not be copied or used without appropriate credit given to author.
Build your own GPS unit
To develop an Arduino Nano based GPS module that is low cost, portable and can be used in Astronomy. (c) Copyright Robert Brown 2014-2017. All Rights Reserved. The schematic, code and ideas are released into the public domain. Users are free to implement these but may NOT sell projects based on this project for commercial gain without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Software Applications, Layout are protected by Copyright Law. Code or portions of code may not be copied or used without appropriate credit given to author.
EVERYTHiNG FOR YOUR » VENTON » MEDiALiNK » MK-DiGiTAL » OCTAGON » OPTiBOX EVO » Gi E3HD » PRiSMCUBE » QViART » AMiKO » WETEK.
4Port USB2.0 controller (Arduino Nano) which you can connect/disconnect ports using remote software application. Ideal for Astronomy solutions such as focusers, cameras CCD, filters etc. Windows application provided for remote control. (c) Copyright Robert Brown 2014-2017. All Rights Reserved. The schematic, code and ideas are released into the public domain. Users are free to implement these but may NOT sell projects based on this project for commercial gain without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Software Applications, Layout are protected by Copyright Law. Code or portions of code may not be copied or used without appropriate credit given to author.
openCryptoki is a PKCS#11 implementation for Linux. It includes drivers and libraries to enable IBM cryptographic hardware as well as a software token for testing. ==== This projects was migrated to GitHub. Visit https://github.com/opencryptoki/ ====
Head tracking app for games and flight simulation software
opentrack is an application that can track users' head movements and relay this information to games and flight simulation software. It allows for output shaping, filtering, and the codebase builds on Windows, OSX and GNU/Linux.
Easy way to use the 1-wire sensors like temperature, voltage and more.
OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc.
Daemon to prevent hard disk head parking in rotational media
Modern rotational hard disks have a misfeature involving the regular automatic unloading of the heads, measurable by the SMART attribute "Load_Cycle_Count", that causes latency on wake-up, and while the manufacturers sell this as "green", it is believed to cause reduced hard disk life. The parkverbot daemon will periodically issue small read requests in order to keep the hardware from going to its head-unloaded idle state.
phpSysInfo is a customizable PHP Script that parses /proc, and formats information nicely. It will display information about system facts like Uptime, CPU, Memory, PCI devices, SCSI devices, IDE devices, Network adapters, Disk usage, and more.
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
Collect info about windows machines on your network, no matter if Lan or WAN. Slow and light process, day by day runs and add some more item. Very low effort for management, just put your subnet and set some schedule, after a couple of week the most of your machines will be in DB. After you collected data you can view them grouped and merged in variuous way. The core is wmic, a windows program that can get (almost) ALL info about every machine such as architecture, disk size, manufacturer, system type, serial number, memory size ...
An object-oriented framework for the development of instrument drivers
pyhard2 is an object-oriented framework to help in the development of instrument drivers. pyhard2 is proposed as an alternative to LabVIEW. Emphasis is given on serial drivers but the framework can be used with any socket. The source also contains the implementation of a PID controller and a setpoint ramp generator. The instrument drivers may further be incorporated in a GUI, using, e.g. PyQt or PySide. Threading is automatically taken care of. Furthermore, generic GUI (called controllers) are provided and can be extended.
Python module wrapper for libpcsclite
PCSC lite is an I/O library for smart cards. This package provides the Python bindings for the PCSC lite libaray, thus letting you write smart card applications in Python. All available documentation can be read online at http://python-pcsclite.sourceforge.net/
A keyboard layout that's worth learning.
Qwpr (pronounced "qwipper", named for the first four keys) is a keyboard layout that's easy to learn (only 11 keys move from their qwerty positions), easy to type (32% better by the Carpalx metric), practical (programmer's punctuation, arrow keys, and all major accented characters easily accessed without moving your hands off the three main rows), and very complete (over 1000 unicode characters and combinations available). The project also includes the tools I used to translate this layout from OSX to Windows format; linux tools pending.
433MHz beacon-finder system for helium balloons
Tools for flashing Rockchip devices
Tools for flashing Rockchip devices.
Roccat hardware support for Linux
This project will provide information and software to get hardware from the manufacturer Roccat to work under linux.
library to drive several displays (with built-in controllers or display modules, a.s.o.)
SRCP system daemon
The srcpd is a gateway between any kind of model railway systems and user interface programs that support the Simple Railroad Command Protocol SRCP.
SCSI Tape Encryption Manager
SCSI Tape Encryption Manager - Manages encryption on LTO 4 and LTO 5 tape drives with hardware-based encryption. Program should work on any other SSP capable tape drives. Built specifically for Linux and AIX. Now supports key change auditing and key descriptors (uKAD). Check the Project News under the Develop section for more information.