Graphical program to map keyboard and mouse controls to a gamepad
antimicro is a graphical program used to map keyboard keys and mouse controls to a gamepad. It's useful for using a gamepad on PC games that do not have any form of built-in gamepad support. This program can also be used to control any desktop application with a gamepad. On Linux, this means that your system has to be running an X environment in order to run this program. This program currently works with various Linux distributions, Windows (Vista and later), and FreeBSD, but with limited support for FreeBSD and Windows XP.
Easy way to use the 1-wire sensors like temperature, voltage and more.
OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc.
The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.
A command-line programmer for Atmel USB microcontrollers
A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at http://github.com/dfu-programmer/dfu-programmer
i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.
Software control for the BitFenix Recon fan controller.
Phoebetria lets you take control of your BitFenix Recon fan controller on more operating systems than the official software. It offers all of the same features as the official software, with the exception of remote access, and has been tested on Windows, Linux, and OS X. The current plan is that future releases will add functionality and control that the official software does not provide -- giving you even more control over your fans.
Paleta de Componentes para as Linguagens Delphi e Lazarus, compatível com Windows e Linux, que permite acesso direto a equipamentos de Automação Comercial, sem DLL's, interagindo com eles direto na porta serial.
Tool for controlling the special features of a "U3 smart drive" USB Flash disk.
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
Capture and control API for IIDC compliant cameras
libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library
Third party open source drivers for the Mindstorms NXT programming environment RobotC. Most sensors available to the NXT platform are supported as well some additional ones. Refer to the Release Notes for more details.
Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li
A GPU memory test utility for NVIDIA and AMD GPUs using well established patterns from memtest86/memtest86+ as well as additional stress tests. The tests are designed to find hardware and soft errors. The code is written in CUDA and OpenCL.
JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.
Drivers for the HP (previously Compaq) Smart Array controllers which provide hardware RAID capability. Hardware info: http://www.hp.com/go/smartarray
This software supports programming Logitech(R) Harmony(TM) remote controls. It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance
5dpo Components for Lazarus
5dpo Component Library for Lazarus (Sdpo) provides a comport (serial port) component, an UVC video driver component for webcams, a Gtk fast painting form and a Joystick component.
AVaRICE is a program for interfacing the Atmel JTAG ICE to GDB to allow users to debug their embedded AVR target.
UK-International keyboard layouts is an effort to create and distribute a UK keyboard layout like US-International. The project has layouts for Windows, MacOS X and Linux. Keyboard Layouts were tested successfully under Windows 7 If you need Chromebook version of this keyboard follow this link: https://github.com/leodip/uk-international-keyboard-for-chromebook
GUI interfaces for Acer Hardware driver -- acerhk.ko
This project site maintains several projects that support the acerhk.ko linux module and provide a GUI interface for the module to activate and deactivate the wireless and bluetooth radios. Please see this projects Wiki for more information: https://sourceforge.net/p/acerhkgui/wiki/Home/ Programs: AcerHK GUI -- Main program. Updated 2015-03-05. Version 0.7.2.5 should work. Please report errors, as it may still require some work. Cinnamon Desktop Applet -- simple system tray icon to provide radio on and off controls. It is also available at: http://cinnamon-spices.linuxmint.com/applets/view/219 Ubuntu AppIndicator Applet -- currently in development. Stay posted for this. Build Script for acerhk.ko. Use the 11.04+. Includes source code. Please see this projects Wiki for more information.
A project for a highly scalable protocol and framework and a collection of software tools for m2m (machine to machine communication) and IoT Internet of Things. The programs here works on Windows and Linux and are based around VSCP, The Very Simple Control Protocol. Repository is here: https://github.com/grodansparadis/vscp_software and here https://github.com/grodansparadis/vscp_firmware
Antec Kuhler 920 Linux Driver/Control
Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.
C++ Application to Control a Logitech Harmony Hub
C++ Application to Control a Logitech Harmony Hub. See the Readme in the Files section for more information.
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.
The purpose of this project is to provide a convenient Java implementation for Future Technology Devices International Inc.'s (http://ftdichip.com) FTD2xx library. This library is used to access and control FTDI's USB to serial converter chips via USB.