HericomMesh is a linux distribution for the Linksys WRT54G. This is a replacement firmware for this low cost router. The Hericom Mesh uses a public networking standard AODV, to build the mesh.
It's a Linux program for using char devices in a network. You may open, read, write, etc... any char device in a computer network. For example, you may open a remote /dev/dsp and run mpg123 on it
Bluetooth HCI-USB Driver for Linux
Unofficial updates for MorphOS operating system
Stepper Motor Driver. Stepper Motor has 5 wires. 1 for Vcc and next 4 are for pulses.
Software for controlling the 1623PC PC to IR Linc, a learning infrared remote control device with an RS232 interface.
This is a joystick driver for Java with support for ForceFeedback (haptic effects). It is based on SDL, therefore it is platform independent and works on Windows, Linux and MacOS X.
Apple Mac IR driver for Windows Vista. It's for Intel Mac users who have installed Windows Vista and want to enable the remote control under Vista.
This project's goal is to provide the Open Source Community with a working driver for the SigmaTel 9200 Codec on the OS X platform.
A simple GUI tool to make projectors work with Linux. Includes options to mirror screen, or use projector as a second screen.
jTomtom is et Java GPS updater. With jTomtom you can update the QuickFix et Radar POI in your Tomtom GPS
This is an open source ASCII/UNICODE keyboard development project for windows Vista/Win 7/Win 8 ,Mac ,Linux.
MATLAB driver routines for the thermoluminescence apparatus using PT100 resistors as the heating and sensing elements described in the Review of Scientific Instruments v78, 083905 (2007). [DOI: 10.1063/1.2776972]
The SpaceNavigatorDriver project is an attempt to create a platform independent library to extract the HID data from the SpaceNavigator and send the position data to a registered listener. An attempt will also be made to make a config GUI.
Drivers and applications for the range of Scientific CCD cameras produced by Apogee Instruments Inc. Both ISA and Parallel interfaces are supported. A high level library and GUI are provided for Astronomical applications.
This project is the same as LibusbJava but with backward compatibility support for Java 1.4.2. Here's the original LibusbJava project description: LibusbJava is a Java wrapper for the libusb and libusb-win32 USB library.
python interface to vellman k8055 I/O board
The LibMotionControl combines different serial protocols of external motion controllers to one generic interface. It is already implemented for one DC-motor (Maxon ASCII-protocol) and two stepper motor controllers (AML, Phytron). This are user level driv
i740 framebuffer for linux
Wrapper to add stereoscopic 3D support to Direct3D and OpenGL based games/applications.
This program helps you pointing your antenna to satellite with inclined orbit if you are using Linux DVB card and RC2000C AZ/EL tracking antenna controller from researchconcepts.com
SM2000 / SM2000-U and other kiosk/pos printers for GNU/Linux & other *NIX Systems
A driver for the 5DT datagloves written in pure C++ using only the STL. Meant to be cross-platform, but written on and developed for IRIX sytems.
ConfigFS is a linux kernel patch that tries to make more information available about drivers and the devices that they manage. In a second step it should also be used to allow the configuration of drivers.
It is a Non-official linux USB driver for the AUTHENTEC AES4000 fingerprint sensor. Written in C.