A very high quality package of printer drivers for CUPS on Linux, Macintosh OS X, and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.
Easy way to use the 1-wire sensors like temperature, voltage and more.
OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc.
Linux GPIB Driver package (source)
The Linux GPIB Package is a support package for GPIB (IEEE 488.2) hardware. The package contains a development environment consisting of a GPIB library written in C, kernel driver modules, and bindings for several other languages.
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
Generic SCSI target subsystem for Linux SCST allows creation of sophisticated storage devices. It includes generic SCSI target core with SCSI target drivers and backend handlers. There are target drivers for iSCSI, Fibre Channel, SRP, SAS, FCoE, etc.
Linux Hardware Compatibility Database
The Linux-Hardware-Guide provides a database of hardware components and investigates the Linux compatibility of the equipment.
Eagle-usb is a Linux driver for DSL USB modems based on the Analog chipset Eagle 8051 (ADImodem). eagle-usb is now replaced by ueagle-atm. The Sagem F@st 800, Sureconnect 9000, ct-350 and others are reported to work. See forum.eagle-usb.org for support
This Webmin module aids in configuring the Dahdi interface to Asterisk
The legacy telephony interface to the open source Asterisk PBX is the Digium Asterisk Hardware Device Interface (Dahdi). The legacy interfaces can be FXS, FXO, ISDN BRI, T1 over USB, T1, E1 ISDN PRI and TDMoE (Dynamic Dahdi) ports. This Webmin module aids in configuring the legacy hardware devices to Asterisk PBX. Webmin was chosen because Webmin is a mature web based GUI platform that concentrates on the hardware side of a server. Webmin allows controlled secure root access to the hardware. Other web based GUIs concentrate on the software side of configuring Asterisk and do not provide root access directly. For the latest information on installing the module in FreePBX go to the Wiki - How to Install page
A tool to download and configure Voltcraft DL-141TH devices.
This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering.
A Linux printer driver/filter for the Lexmark Z11 and the Compaq IJ300 printer, supporting color and b/w printing, variable page size and more.
USBLib based driver for USB foam missile launcher toys. Currently two launchers are supported, but others can easily be added.
The MCA166 is a modular detection system for ionizing radiation. This project is intended to create a device driver and additional software applications for this system to make it usable under additional non-Windows operating systems.
This program helps you pointing your antenna to satellite with inclined orbit if you are using Linux DVB card and RC2000C AZ/EL tracking antenna controller from researchconcepts.com
OpenSSI is a single-system image clustering solution for Linux. Goals for OpenSSI Clusters include availability, scalability and manageability, built from standard servers.
The KIWI Image System provides a complete operating system image solution for Linux supported hardware platforms as well as for virtualisation systems like Xen.
Linux driver for the Philips SRM 7500 remote control. This remote control uses a USB dongle implementing IEEE 802.15.4 MAC layer for bidirectional RF communication which also allows controlling the remote's small display.
A daemon to communicate the mx240a (IMfree) using libusb.
A linux driver and script that runs in the user space that enables synaptic touchpads to have advanced multi-touch features, not currently available. Read my blog for more info randomtruthsblog.synthasite.com. It only confirmed working on macbooks but a
Linux weather station software for the Rainwise WS-2000 weather station. Temperature, humidity, rainfall, wind, barometric pressure. Background process with graphics and web page display.
This project is an attempt to provide the Linux community with kernel drivers for two hugely popular DVD playback cards namely DXR3 from Creative Labs and Hollywood Plus from Sigma Designs.
G15daemon provides support for the G15 keyboard. Multiple LCD clients are supported with a 'virtual' LCD buffer for applications or libraries, and all keys are usable. Users flip through connected screens with a press of a button.Linux, OS-X & Solaris
A collection of hacks to control your Roomba from your computer in C, Java, Perl and shell.
A hardware configuration and tweaking program for Dell laptops running Ubuntu Linux. This program was written for anyone who desires to automate the configuration of incorrectly configured or unsupported hardware.
A collection of open source tools and libraries for the Parallax USB Oscilloscope.