X.Org XInput Driver for Logitech MX series USB mice and the Linux 2.6 event interface, accomodating these mice's special quirks.
Embedded Software Framework for ARM/Cortex Microcontroller
Embedded Software Framework for ARM/Cortex Microcontroller useable especially in robotics applications but also in any other embedded software projects. The framework is based on C/C++ code and includes other open source projects like FreeRTOS, lwIP etc. and also adds additional libraries and tools to provide a powerfull set of functions for embedded software projects At the moment there is just a small Wiki in German language with little information. We will translate, update and enhance these information as soon as possible.
A GTK interface for JazPiper MP3 players, based on OpenJaz.
This project is to create a linux ATM driver for the Motorola MPC8260, a processor which has built-in ATM SAR support. Based on port of the mpc860sar SourceForge project.
A Linux Library and GUI to control the Luxeed U7 LED Keyboard. Uses libusb 1.0 to communicate with the keyboard.
Linux kernel porting for NEC Mobile Gear II MCR7x0(MCR700 and MCR730 in JAPAN) and NEC MobilePro 8x0(800 and 880 in USA).
Drivers and utility set for 802.15.4 standard low-rate wireless personal area networking
Kernel framebuffer lowlevel driver for Trident Blade3D (and maybe other)cards for kernel version 2.4
Tools and patches to run Linux on the IBM NetworkStation 1000 series of thin clients.
The Linux-DAQ-USB project develops and maintains a family of Linux device drivers for USB based data acquisition systems. Incremental package release naming convention is as follows: R0.x(Alpha), R1.x(beta), R2.x(production), R3.x(mature).
Development area for GNU/Linux 2.6.x for the KS8695 ARM SoC. Covers kernel patches, drivers for serial, Ethernet, PCI, GPIO, watchdog subsystems, and drivers for optional PCI based devices such as USB, WiFi, WiMAX, IPSec, SSL, and RSA devices.
It's a DAQ-DCS integration project intended for general purpose data taking.
Mac OS X IOKit driver and utilities for the USB interface of NEC 3G mobile telephones.
The control kernel for any small control system
Mini Control System Kernel is a library developed using C (avr-gcc) and avrassembelr. This library including the drivers for hardware and adds the abstract layer to make it easier to work with perephirical devices. The circuit and live example will be added later.
A utility for converting raw evdev events into other commands (not just keypresses). Useful for multimedia mice and keyboards, joysticks, remote controls and more.
This project is aimed to porting ppbus (the parallel port abstract bus found in FreeBSD) to the NetBSD Operating System. This will allow using faster devices with NetBSD and will add IEEE 1284 support.
It's a Linux program for using char devices in a network. You may open, read, write, etc... any char device in a computer network. For example, you may open a remote /dev/dsp and run mpg123 on it
Utility for testing noritake CU20026SCPB-t23a vfds (commonly found in nortel millenium payphones).
This is a Linux kernel module for some (but by no means all) Sun SPARC-based computers. It uses OBP facilities, if implemented, to access the 128 registers exposed by the LOMlite2 manager chip on machines such as the Netra T1-200 and Netra X1.
OTPD ("Open Ticket Printers Driver") is a cross-platform print-subsystem for pos-..ticket-.. and label-printers; part of QDroid framework ( http://qdroid.berlios.de ).
OW Baby is OneWire Slave implementation for PIC16F628 and similar Micro-controllers. With it, you can rule your ultra cheap MCU with using One Wire protocol. ASM language and IRQ used. Code works on 4Mhz internal clock.
Linux kernel module for many HP Omnibook/Pavillon, Toshiba Satellite (with Phoenix BIOS) and Compal laptops. It is based on the module found in the 'omke' project.
The Open USB FXS project aims at producing a very low-price USB FXS board. The project contains all necessary files to reproduce the board PCB, the board's firmware and PC software.
OpenBeanPie intends to implement an integration with BeanShell Java Interpreter and a little abstraction/simplification layer over WiiRemoteJ in order to obtain an interpreter for scripts that control Nintendo's Wiimotes behaviour.
OpenPCI is a user-mode library which allows user-mode applications to access PCI-based devices. A generic driver enables user-mode developers to access and manage their hardware without kernel knowledge and driver development knowledge.