A cross-platform library that gives apps easy access to USB devices
Library to enable user space application programs to communicate with USB devices
Alternative firmware for Asus wireless routers
Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.382 (382 and newer releases).
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.
I/O performance Analysis Tool
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.
VoodooHDA is an open source audio driver for devices compliant with the Intel High Definition Audio specification. It is intended as a replacement for AppleHDA on Mac OS X with support for a wide range of audio controllers and codecs.
A very high quality package of printer drivers for CUPS on Linux, Macintosh OS X, and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools.
Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.
A command-line programmer for Atmel USB microcontrollers
A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at http://github.com/dfu-programmer/dfu-programmer
macam is focused on developing webcam support for Mac OS X. We are trying to incorporate many different camera types. If you want a camera to work on OSX, join in! We need help with testing cameras (there are soooo many). Please visit the Web Site fi
IPMItool provides a simple command-line interface to IPMI-enabled devices through an IPMIv1.5 or IPMIv2.0 LAN interface or Linux/Solaris kernel driver.
Arduino Focuser, fully ASCOM complaint
A stepper motor focus controller (DIY) based on Arduino Nano/Uno, with firmware, application and ASCOM support. Lots of options and driver boards supported. Tested on Windows, Linux and Mac, Moonlite compatible. (c) Copyright Robert Brown 2014-2018. All Rights Reserved. YOU MAY NOT SELL CONTROLLERS OR PCB's BASED ON THIS PROJECT to anyone without express written permission granted from the author. Schematics, Code, Firmware, Ideas, Applications, Layout are protected by International Copyright Law. Permission is NOT granted to any person to redistribute, market, manufacture or sell the myFocuserPro products, ideas, PCB's, circuits, builds, variations and units described or discussed herein or on this site. Permission is granted for personal and Academic use only. THIS MEANS THAT YOU CANNOT RE-DESIGN AND MAKE AVAILABLE KITS OR PCB BASED ON THIS PROJECT AND OFFER THOSE KITS FOR SALE TO OTHERS. THAT IS A BREACH OF COPYRIGHT.
System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.
Easy way to use the 1-wire sensors like temperature, voltage and more.
OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc.
Software control for the BitFenix Recon fan controller.
Phoebetria lets you take control of your BitFenix Recon fan controller on more operating systems than the official software. It offers all of the same features as the official software, with the exception of remote access, and has been tested on Windows, Linux, and OS X. The current plan is that future releases will add functionality and control that the official software does not provide -- giving you even more control over your fans.
Capture and control API for IIDC compliant cameras
libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library
GRBL port for RAMPS .1
************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested
Implementation of GlobalPlatform smart card specification
The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell.
i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.
Cellular manager for mobile phones/modems
Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp
DarwiinRemote is a tiny program & library which reads data from and sends data to Nintendo Wii Remote (Wiimote), nunchuk, & classic controller.
usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.
Open Source USB 3.0 xHC driver for OS X 10.7.5 - 10.10
An open source driver for USB 3.0 xHC controllers for Mac OS 10.7.5 - 10.10